Professional Documents
Culture Documents
Engineering
Lab-Manual
V1.0
Lab-Manual 2020
Introduction to Lab-2
This lab introduces students to the method of connecting two similar devices using UTP cable.
This lab work includes the preparation of cross cable by connecting RJ45 connectors at both
ends.
EXERCISE - 1
Objective
The objective of this exercise is to understand peer to peer connection.
Problem Statement
Connect two similar devices through cross cable using RJ45 connector
Procedure
Cut a 5’ piece of unshielded twisted pair wire
Take two RJ45 connectors
Follow the 568A standard
Use cable punching tool to connect the connectors to the wire
Use cable testing tool to check the cable connectivity
Plug the one end in one computer and the other to another computer
Set up TCP/IP settings on both machines
Share a file and grant permissions
Access one computer from another
568A