Professional Documents
Culture Documents
Jib Crane Brochure PDF
Jib Crane Brochure PDF
and cranes
Workplace efficiency improvement with
the Demag crane range
System components and installations
As a pioneer in overhead materials handling, Demag State-of-the-art material-flow solutions make it possible
Cranes & Components has been developing and manu- to reduce storage and transport costs, cut delivery times
facturing cranes and hoists for more than 180 years. and improve workplace ergonomics in companies of all
Thanks to the system philosophy, all products and com- sizes – from small workshops to major industrial enterprises.
ponents are designed in such a way that they can be
combined to create a unique scope of applications,
ranging from simple hoists to complex system solutions.
32996
2
37693-8 39026-1 36589-13
37079
3
Switch to improved productivity and ergonomics
Manual handling and combining or moving relatively be lifted and transported quickly and easily and deposited
light loads is often not only time-consuming, but also an gently and precisely. In this way, setting up and idle times
ergonomic burden for employees. Together with a wide are considerably reduced and periods of waiting for
selection of hoist units, slewing jibs and cranes installed workshop cranes to become available can be completely
direct at the workplace enable all types of workpieces to eliminated, for example.
38138-8
4
37078 37688-7 39504-3
Precise and smooth positioning Optimum support They can also be installed with ease
Working with sensitive products, Pillar-mounted slewing jibs and pillar wherever other materials handling
tools and machinery often requires and wall-mounted slewing cranes equipment cannot be used for
very careful handling of the parts. ideally supplement all materials structural reasons or because of the
Smooth lifting and lowering motions handling installations throughout the available space and they can also
as well as precise positioning with in-house material flow. They provide be integrated into machinery and
Demag pillar-mounted slewing jibs handling performance at machine installations.
and pillar and wall-mounted slewing tools and assembly stations, as well
cranes enable sensitive and valuable as in outdoor storage yards and on
loads to be handled gently and rejects loading ramps.
caused by impacts, sudden jolts and
hard landings to be avoided.
This results in smooth and efficient
operating sequences and greater
productivity at individual workplaces.
At the same time, the use of Demag
slewing jibs and cranes relieves
workers of the physical burden and
reduces the risk of accidents and
injuries when heavy or awkward
parts are handled.
37636-1
5
The right solution for every application
Standard Standard
1,000 kg
D-GS up to 7 m ∞ 360°
D-GW up to 12 m ~ 180°
The crane types shown on the following pages are outdoor operation require additional protective features,
designed for indoor operation as standard. Designs for which can be found on page 18.
6
D-MOS mobile pillar-mounted slewing cranes
Operating range
360°
Outreach (m)
2 3 4 5
125
250
SWL (kg)
315
400
500
38872-1
Ideally suited for workplaces that are subject to frequent ■ Classification according to DIN 15018 H2B2
change, since the crane can be simply relocated together ■ The compact slewing unit design ensures minimum
with the workplace. The location of the crane can be approach dimensions
ideally adapted to the process requirements of the given ■ Can be easily relocated by means of a forklift or
application. D-MOS cranes are also highly suitable for workshop crane
maintenance or conversion work. ■ Aligned at the operating location by means of four
adjusting screws integrated in the crane base
■ Fitted with Demag chain hoist as standard
■ I-beam profile jib
Options
■ Pillar extension for larger hook paths Manual trolley
■ Manually operated trolley to move the crane without
7
KBK pillar-mounted slewing jibs
Operating range
300°
Outreach (m)
2 3 4 5 6 7
80
125
SWL (kg)
250
500
1000
33881
KBK slewing jibs feature high load capacities and out- Options
reach in relation to their deadweight. The low weight ■ Anchor bolt set and template for fixing
enables the jib to be moved easily and the use of KBK to foundations
hollow section rail as the crane girder provides for very ■ Anchor bolt connection
low travel forces. ■ Other pillar heights and / or pedestal for larger hook
paths
■ Classification according to DIN 15018 H2B3 ■ Slewing motion limit stops
■ Fitted with Demag chain hoist as standard ■ Locking arrangement for the jib
KBK pillar and wall-mounted slewing jibs The low headroom dimension results in a lifting height
are also available in low-headroom design gain of 290 mm compared to the standard design.
Whether for low-headroom applications, modernisation
measures or changes in the use of the building, our “short”
units are the perfect solution in many cases.
8
KBK wall-mounted slewing jibs
Operating range
270°
Outreach (m)
2 3 4 5 6 7
80
125
SWL (kg)
250
500
1000
36139-1
easy to install, since the bracket is ready to be fitted as ■ Locking arrangement for the jib
a unit and eliminates any complicated alignment work. ■ Equipment for outdoor operation
80 up to 3860
125 up to 3060
250 up to 2260
500 up to 1560
9
KBK pillar-mounted slewing crane with two jibs
400 x 3 500 x 3
1,000 x 3
250 x 5 315 x 4
* Maximum available jib combinations. Combination D
250 x 5 315 x 4 Jibs arranged one above the other
Smaller loads and outreaches
400 x 3 can be selected per jib.
of specific process sequences can be improved and, at ■ Other pillar heights and / or pedestal for
■ Classification according to DIN 15018 H2B3 ■ Locking arrangement for the jib
10
D-GS pillar-mounted slewing cranes
Operating range
360°
Outreach (mm)
2 3 4 5 6 7
80
125
SWL (kg)
250
500
1000
37684-5X
room and compact dimensions. They are ideally suited ■ Anchor bolt connection
wherever maximum hook paths are required and only ■ Other pillar heights and / or pedestal for
■ Fitted with Demag chain hoist as standard ■ Locking arrangement for the jib
■ Radio control
11
D-AS pillar-mounted slewing jibs
Operating range
270°
Outreach (m)
2 3 4 5 6 7 8 9 10
80
125
250
SWL (kg)
500
1000
1600
2000
39187-1
■ Classification according to DIN 15018 H2B2 ■ KOMPAKT anchor attachment Anchor bolt connection
■ I-beam profile jib ■ Other pillar heights and / or pedestal for larger hook
■ Radio control
12
D-AW wall-mounted slewing jibs
Operating range
180°
Outreach (m)
2 3 4 5 6 7 8 9 10
80
125
250
SWL (kg)
500
1000
1600
2000
33676
they can also be used wherever long hook paths are ■ Chain hoist with electric travel
■ Classification according to DIN 15018 H2B2 ■ Low-maintenance flat-cable festoon power supply
■ Fitted with Demag chain hoist as standard ■ Control travelling separately along the jib
13
D-TS pillar-mounted slewing cranes
Operating range
360°
Outreach (m)
2 3 4 5 6 7
80
125
250
500
1000
SWL (kg)
1600
2000
2500
3200
4000
5000
37684-2
This slewing crane is the universal solution for the me- Options
dium load range up to 5000 kg. The low-headroom jib ■ Anchor bolt set and template for fixing
provides for particularly long hook paths for an unlimited to foundations
slewing range. It can also be powered by an optional ■ TOP anchor attachment
■ Classification according to DIN 15018 H2B2 ■ Other pillar heights and / or pedestal for
■ Radio control
14
D-MS pillar-mounted slewing cranes
Operating range
360°
Outreach (m)
2 3 4 5 6 7 8 9 10 11 12
80
125
250
500
1000
1600
■ Classification according to DIN 15018 H2B3 ■ Other pillar heights and / or pedestal for
■ Radio control
15
D-GW wall-mounted slewing jibs
Operating range
180°
Outreach (m)
2 3 4 5 6 7 8 9 10 11 12
80
125
250
500
1000
1600
SWL (kg)
2000
2500
3200
4000
5000
6300
8000
10000 39635
slewing jibs are suitable for a wide variety of applications. of the jib
■ Pillar bracket
16
Firm connection
Wall connections
A wall bracket is used to attach Pillar brackets can be used for Welding plates accommodate the
slewing jib cranes to a concrete wall, simple attachment of wall-mounted jib bearing brackets and are ready
for example. The unit, which accom- slewing jib cranes to a wide range of for installation for simple and
modates the two jib bearing brackets, pillar dimensions. reliable connection of cranes to steel
is ready to be installed and is attached structures.
by means of heavy-duty anchor bolts.
Pillar connections
Anchor bolt sets are used to fix TOP anchors and COMPACT Heavy-duty anchors are used for
pillars to the foundations A template anchors are the optimum solution securing pillar-mounted slewing
is used for precise alignment of if a crane is used at several fixed cranes and jibs to existing concrete
the anchor bolts with the mounting locations. They are secured in the floors. Chemical anchor bolts for
holes in the base of the pillar. foundations flush with the floor, the dynamic loads are used to fit an
base of the pillar is bolted into place anchor plate to which the base of
without the need for any alignment the crane pillar is then attached.
or undergrouting. When the crane is
dismantled, the floor is clear of any
protruding edges or other obstacles.
17
In all weathers
Demag slewing jibs and cranes can also be operated cranes resistant to the effects of weather and guarantee
outdoors. Additional protective components make the a long service life and maximum availability.
➍
➍ Control pendant switches can be
protected against the weather
by means of an enclosed housing.
The use of a radio remote control
system is recommended as the ideal
alternative, however.
39667-1
18
Hoists for every application
Demag compact hoist units are available with a wide They provide optimum ergonomic relief for employees
range of load capacities, hoist speeds and features. and, at the same time, maximum safety and reliability.
19
Fax enquiry +49 (0)2335 92-2406
Demag Cranes & Components GmbH Please send the quote to:
Dept. 2903 KBK Product Management
P.O. Box 67 Company
58286 Wetter / Germany
P.O. Box/Street
Town/post code
Attention of
Telephone / extension
Telefax
Details of the planned wall-mounted jib crane Details of the planned pillar-mounted jib crane
Type Type
Weight of the load GH : kg Weight of the load GH : kg
Slewing crane jib length l: m Slewing crane jib length l: m
Highest hook position H: mm Highest hook position H: mm
Clear headroom h + min. 100 mm: mm Clear headroom h + min. 100 mm: mm
Min. 100 mm
min. 100 mm
20
Unique range of applications
37725
21
Subject to change. Not liable for errors or omissions.
22