Professional Documents
Culture Documents
A solar grid-tied inverter converts the DC well as phase. And accordingly it sends out
output of PV modules into AC power suitable instructions to driver which drives DC-DC and
for transmission on the power grid, or use it DC-AC modules. Furthermore, DSC is able to
for your own consumption, often deploying find out abnormal conditions such as
reactive power to meet new grid codes. It transmission failure of power grid and take
must always optimize the power output via measures such as cutting off the connection
MPPT (maximum power point tracking) and between inverters and grid to prevent “island
additionally monitor both the system and effect” occurences on power grid.
grid connection. In practice, each solar Additionally, the control module has an
inverter installed in solar power plants needs interface for external display showing PV
to connect an array or string of PV modules to modules’ status and input/output voltage
the power grid. e more efficient the and current, and integrates a RS232/RS485
inverter, the better the LCOE (levelised Cost communication interface to connect with
of Electricity) generated by the system. control centers of solar power plants, so that
real-time monitoring of solar panels and
An on-grid solar inverter is composed of a DC-
inverters can be implemented.
DC module, a DC-AC module and a control
module. DC-DC module is built with a How does it work?
MOSFET, an inductor and a transformer, and
PV Grid Connected Inverters operate at a
functions to provide a stable DC output
lower, safer voltage from the PV array, while
through rectifying and filtering the unstable
having the advantages of reliability,
DC power produced by PV modules; DC-AC
flexibility and improved energy yield. Using
module includes an IGBT array and an output
lower voltages on the PV side means there
filter circuit to convert the DC output of DC-
are lower voltages in your roof eliminating
DC module into an AC output suited for
high voltage hazards and giving peace of
transmission on power grid. Control module
mind to installers and service personnel.
is the core of whole system. It has a DSC, a
voltage sensor, a current sensor, and a driver By using short multiple strings of panels, PV
that drives MOSFET and IGBT module. DSC Grid Connected Inverters make sure that
calculates the maximum power point of PV there are more paths for electricity to flow,
module array based on signals collected by which ensures minimal power loss due to
sensors including PV modules’ voltage and varying environmental or panel conditions.
current, power grid’s voltage and current, as
8
ON GRID/GRID TIE SOLUTIONS
9
Grid Tie Inverter
String Inverter - Single Phase
SOLAR PANEL
PV module
RS485 UTILITY
UTILITY GRID
METER
Harvested
TCP/IP TCP/IP Solar Surplus power routed to utility grid
Energy
Network cable
Network cable
Switch DC to AC
GRID TIE MAIN UTILITY
W-LAN
Router
Power routed to Loads
Internet
10
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 2K
Number of input 1
Power factor 1
Efficiency
Maximum 96%
Euro-eta 95%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
EN61000-3-3, EN61000-3-11
11
Grid Tie Inverter
String Inverter - Single Phase
SOLAR PANEL
PV module
RS485 UTILITY
UTILITY GRID
METER
Harvested
TCP/IP TCP/IP Solar Surplus power routed to utility grid
Energy
Network cable
Network cable
Switch DC to AC
GRID TIE MAIN UTILITY
W-LAN
Router
Power routed to Loads
Internet
12
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 2K
Number of input 1
Power factor 1
Efficiency
Maximum 96%
Euro-eta 95%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
EN61000-3-3, EN61000-3-11
13
Grid Tie Inverter
String Inverter - Single Phase
SOLAR PANEL
PV module
RS485 UTILITY
UTILITY GRID
METER
Harvested
TCP/IP TCP/IP Solar Surplus power routed to utility grid
Energy
Network cable
Network cable
Switch DC to AC
GRID TIE MAIN UTILITY
W-LAN
Router
Power routed to Loads
Internet
14
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 3K
Number of input 2
Power factor 1
Efficiency
Maximum 97.50%
Euro-eta 96.50%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
EN61000-3-3, EN61000-3-11
15
Grid Tie Inverter
String Inverter - Single Phase
INSTALLATION DIAGRAM
SOLAR PANEL
UTILITY
UTILITY GRID
METER
Harvested
Solar Surplus power routed to utility grid
Energy
16
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 4.2K
Input (DC) Parameters
Efficiency
Maximum >97.5%
Euro-eta >96.8%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
17
Grid Tie Inverter
String Inverter - Single Phase
INSTALLATION DIAGRAM
SOLAR PANEL
UTILITY
UTILITY GRID
METER
Harvested
Solar Surplus power routed to utility grid
Energy
18
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 5K
Input (DC) Parameters
Efficiency
Maximum >97.6%
Euro-eta >96.8%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
19
Grid Tie Inverter
String Inverter - Single Phase
INSTALLATION DIAGRAM
SOLAR PANEL
UTILITY
UTILITY GRID
METER
Harvested
Solar Surplus power routed to utility grid
Energy
20
Grid Tie Inverter
String Inverter - Single Phase
TECHNICAL SPECIFICATIONS
Type Code SRS - 10K
Input (DC) Parameters
Number of input 3
Efficiency
Maximum 98.10%
Euro-eta 96.90%
Power Consumption
Environmental limits
Degree of protection IP 65
Communication
Remote Monitoring Through plug-in GPRS module and viewable remotely through web portal
Protection
Product Compliance
EN61000-3-3, EN61000-3-11
21
Grid Tie Inverter
String Inverter - Single Phase
Su-kam Monitoring kit aims to make an ecosystem for win-win cooperation, and to create value for various levels in the industrial
chain, including end users, installers, distributors and device manufacturers, etc.
22
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
23
Grid Tie Inverter
Central Inverter - Three Phase
Conversion
efficiency
98%
96%
94%
92%
90%
88%
Output Power
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Rating Power
24
Grid Tie Inverter
Central Inverter - Three Phase
TECHNICAL SPECIFICATIONS
50 KWp
Max DC Voltage 880V DC with Crystalline silicon /720V DC with thin film
Max Inpaut 2
MMPT Range 420V-850V
Max DC input current 130A
PV Array Configuration Floating Negative Ground Positive Ground
Transformer Available
Rated Output Power 50 KW
Rated Voltage 400V
Voltage range 310V-450V
Display LCD
Communicaton Ethernet/RS232/RS485
Grid (AC side) Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
Faults Displayed Array Fail, AC /DC Earth Fault, No Sync, Frequency Out of Range, Inverter Over Current
on Display
25
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
26
Grid Tie Inverter
Central Inverter - Three Phase
Conversion
efficiency
98%
96%
94%
92%
90%
88%
Output Power
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Rating Power
27
Grid Tie Inverter
Central Inverter - Three Phase
TECHNICAL SPECIFICATIONS
100 KWp
Max DC Voltage 880V DC with Crystalline silicon /720V DC with thin film
Max Inpaut 4
MMPT Range 420V-850V
Max DC input current 250A
PV Array Configuration Floating Negative Ground Positive Ground
Transformer Available
Rated Output Power 100 KW
Rated Voltage 400V
Voltage range 310V-450V
Display LCD
Communicaton Ethernet/RS232/RS485
Grid (AC side) Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
Faults Displayed Inverter Over Temp., DC Over Volt., Fast DC over Volt., Array over Volt., DC under Volt., Local Emergency Stop (optional)
on Display
28
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
29
Grid Tie Inverter
Central Inverter - Three Phase
Feature
• High Total Efficiency – High reliability and efficiency with • Advanced grid support functionality – Extensive grid code
low auxiliary consumption for rapid return on investment. compatibility and adjustability.
MPP efficiency > 99.9% ; Maximum efficiency >97.5% • Proven technology platform – High reliability and long
• PV compatibility – Su-Kam Grid Tie inverter is designed to operating life for secured return on investment.
take advantage of solar modules configured as high voltage • Compact state of the art design – Transformer less design.
PV string arrays – with an input voltage Maximum Power Low space requirement, with fast and easy installation and
Point Range of 150 to 550 Vdc. serviceability for reduced overall cost.
• Maximum Power Point Tracking (MPPT) – Su-Kam Grid Tie • Life cycle service & support – Rapid support anywhere
inverters use Maximum Power point Technology (MPPT) to through Su-Kam's extensive service network.
harvest the maximum amount of energy from the solar
• Robust enclosure, with IP65 rating – Suitable for outdoor
array. Provide single and double MPP trackers for different
installation
application demands.
• Expandable – Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Conversion
efficiency
98%
96%
94%
92%
90%
88%
Output Power
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Rating Power
30
Grid Tie Inverter
Central Inverter - Three Phase
TECHNICAL SPECIFICATIONS
250 KWP
Max DC Voltage 880V DC with Crystalline silicon /720V DC with thin film
Max Inpaut 8
MMPT Range 420V-850V
Max DC input current 600 A
PV Array Configuration Floating Negative Ground Positive Ground
Transformer Available
Rated Output Power 250KW
Rated Voltage 400V
Voltage range 310V-450V
Display LCD
Communicaton Ethernet/RS232/RS485
Grid (AC side) Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
Faults Displayed Inverter Over Temp., DC Over Volt., Fast DC over Volt., Array over Volt., DC under Volt., Local Emergency Stop (optional)
on Display
31
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
32
Grid Tie Inverter
Central Inverter - Three Phase
Conversion
efficiency
98%
96%
94%
92%
90%
88%
Output Power
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Rating Power
33
Grid Tie Inverter
Central Inverter - Three Phase
TECHNICAL SPECIFICATIONS
500 KWp TL
Max DC Voltage 880V DC with Crystalline silicon /720V DC with thin film
Max Inpaut 16
MMPT Range 420V-850V
Max DC input current 1200A
PV Array Configuration Floating Negative Ground Positive Ground
Transformer NA
Display LCD
Communicaton Ethernet/RS232/RS485
Grid (AC side) Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
Faults Displayed Wrong Phase, Grid abnormal, Output overload, Wound component, Array reverse polarity (optional), Array fuse fail(optional)
on Display
34
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
35
Grid Tie Inverter
Central Inverter - Three Phase
Conversion
efficiency
98%
96%
94%
92%
90%
88%
Output Power
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Rating Power
36
Grid Tie Inverter
Central Inverter - Three Phase
TECHNICAL SPECIFICATIONS
1000 KWp
Max DC Voltage 880V DC with Crystalline silicon /720V DC with thin film
Max Inpaut 64
MMPT Range 420V-850V
Max DC input current 2400A
PV Array Configuration Floating Negative Ground Positive Ground
Transformer Available
Rated Output Power 1000KW
Rated Voltage 10KV/20KV/35KV
Voltage range M.V Transformer (optional)
Display LCD
Communicaton Ethernet/RS232/RS485
Grid (AC side) Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
Faults Displayed Wrong Phase, Grid abnormal, Output overload, Wound component, Array reverse polarity (optional), Array fuse fail(optional)
on Display
37
Grid Tie Inverter
Test Reports and Certificates
38
Grid Tie Inverter
Test Reports and Certificates
39
Grid Tie Inverter
Test Reports and Certificates
40
Grid Tie Inverter
Test Reports and Certificates
41
Grid Tie Inverter
Test Reports and Certificates
42
Grid Tie Inverter
Test Reports and Certificates
43