Professional Documents
Culture Documents
WWW.ANSELL.COM
N89
Nitrile Exam Glove with Extended Cuff
PHYSICAL PROPERTIES
Typical Values Testing Method
Length (mm/inches) 300 / 11.8 ASTM D3767,EN420
Freedom from Holes (Inspection level I) 1.5 AQL ASTM D5151,EN 455-1
Palm Thickness (mm/mils) 0.15 / 5.9 ASTM D3767,EN420
Finger Thickness (mm/mils) 0.19 / 7.5 ASTM D3767,EN420
BEFORE AGING AFTER AGING
Ultimate Tensile Strength (MPa) 27 14 ASTM D412 & D573
Elongation at Break (%) ≥ 500 ≥ 400 ASTM D412
ORDERING INFORMATION
Size S (6.5 - 7) M (7.5 - 8) L (8.5 - 9) XL (9.5 - 10)
Ansell Product Code N891 N892 N893 N894
Ansell, ® and ™ are trademarks owned by Ansell Limited or one of its affiliates. US Patented and US and non-US Patents Pending:
www.ansell.com/patentmarking © 2020 Ansell Limited. All Rights Reserved.
Neither this document nor any other statement made herein by or on behalf of Ansell should be construed as a warranty of
merchantability or that any Ansell product is fit for a particular purpose. Ansell assumes no responsibility for the suitability or adequacy of
an end user's selection of gloves for a specific application.