Professional Documents
Culture Documents
(4) Will few or many cuts be made in a day? Hydraulic Rod and Bar Cutters
• Compact, rugged, portable cutter
• Easily replaceable or redressable blades
W75000 W11800
/
ÃÊÃÊ>Ê>``Ì>ÊVÃ`iÀ>ÌÊÊV
Ã}Ê>ÊVÕÌÌiÀ°Ê*Ê>Õv>VÌÕÀiÃÊiÝ«iÃÛiÊ
>`ÊVÕÌÌiÀÃÊvÀÊ
• Cuts rods and bars
• Includes control handle
• Includes filter and air breather
• 1-hose operation
(A)
(B) • Engineered for demanding production
Replacement Cutter Blades Cutter Head (C) cutting such as steel mill applications
light duty work, heavy duty hand cutters for tough jobs, and hydraulic and air cutters for exceptionally
Tool Stationary Moving & Cylinder, • Heavy-duty, large-capacity, portable,
No. Blade Blade No Handle (D) durable cutter
W75000 13234 13934 75000B • Cuts chain and reinforcing rod
HYDRAULIC CUTTERS
W11800 13918 13908 11800B • Includes control handle
(E)
Approx.
Cat UPC A B C D E Width Capacity Weight Thrust
Hydraulic, Angular Rod and Bar Cutter W75000 037103904447 15 394 9 3/4 248 4 1/8 105 4 1/4 108 5 128 4 102 3/4 19 17 8 25,000 11,340
W11800 037103904119 7 1/2 446 12 3/4 325 5 128 5 1/2 140 5 128 5 7/8 149 1 1/8 29 40 18 70,000 31,752
For soft metals to 9/16” (14mm), medium metals to 1/2” (13mm)
(A) • Makes flush cuts in confined spaces
• Angular jaws with clipper-cut blades Hydraulic Wire Rope Cutters
4 1/2”
• Cuts soft or medium material
• Lockplate keeps jaws from loosening (A) • Use for production cutting of wire rope and cable
• Loads through the front to allow cuts anywhere
H.K. Porter
• Do NOT cut hard material
on the wire rope or cable
• Angle of cutterhead keeps tool and users
(B) (C) • Control handle available separately for WRC125
hands clear of work surface
H.K. Porter
• Shear-cut blades
(A)
Hydraulic Cable Cutter • Cuts aluminum or copper power and communications cable
• Toggle design gives extra power for cutting large, tough cable
For soft copper or aluminum cable to 3” (76mm) • Shear-cut blades • Keeper ensures clean, shearing cuts of fine strands
• Cuts soft copper or aluminum cable (C)
■ (C)
Manual and lead- or rubber-covered power and (B) TC400CB – Cutter Head and Cylinder, no control handle
Cutters communications cable
WARNING:
(A) • Do NOT cut ACSR or steel cable
■ Hydraulic
Cutters
13 3/4”
■ Pneumatic Approx.
Cutters 9”
Cat UPC A B C Width Capacity Weight Thrust
No. No. Inch mm Inch mm Inch mm Inch mm Inch mm lb K lb K
WTC400C 037103904041 29 737 11 279 2 1/2 64 2 1/2 64 4 102 22 10 22,000 10,000
Since 1880, H. K. Porter® has been the preeminent brand
● The harder the material being cut, the more it will fly.
Includes (B) cylinder assembly (1753), (C) cutterhead (8913CN) only. For use with any HKP
hand pump or air/hydraulic pump.
8913CN 037103914745 4 1/2 2 Replacement cutterhead only. (C)
210
CABLE (ACSR) EHS GUY STRAND TIRE CHAINS WIRE, STAINLESS STEEL
98 Prices Herein Do Not Include GST Product depictions are not to scale.
*!7 $%3)'.3
There are six basic cutting jaw designs, engineered to give long, trouble-free life and the most efficient cutting of materials for which they are designed.
All Purpose Heavy Duty Clipper Sheer Type Short-Nosed Angular Style
Jaws Straps Cut Jaws Jaws Jaws Jaws
Slightly rounded ii«ÊVÕÌÌ}Êi`}iÃÊ>}i`Ê For smooth flush Cut coarse or fine For hard alloy chain Cutting edges offset
cutting edges under the most demanding cuts, close to cable with minimum and padlock hasps. 30º for finish cutting.
broaden cutting applications. workpiece distortion of strands. ii«ÃÊ
>`ÃÊVi>ÀÊvÊ
applications. work.
The first safety rule is wear your gloves and safety glasses at all times!
DO wear safety shoes. DO remember that the hardness of the stock being cut is as important as
its size.
DO remove oil or grease from your hands, from tools and from the
floor and area where you will be working. DO use all tools as recommended.
DO keep your cutting tools in good repair. Tighten bolts, lubricate and DON'T exceed listed tool capacity.
inspect hoses and connections before using.
DON'T attempt to use a cutting tool, hand or power, until you fully understand
DO remember that metal flies when cut. The harder the metal, the its use.
farther it will fly.
DON'T forget that metals may fly and cause injury.
DO warn those in the area when you intend to use a cutter. Protect
your fellow workers from flying metal, too. DON'T cut diagonally.
DO keep cutter jaws at right angles to the piece being cut. DON'T twist or pry with the blades while you are cutting.
DON'T use cutters for any applications except those listed in this catalogue.
4)03 4/ %!3)%2 3!&%2 #544).'
b. Use the right cutting tool for the type, size and hardness of the metal you
are cutting.
H.K. Porter
c. ii«ÊVÕÌÌiÀÊ>ÜÃÊ>ÌÊÀ}
ÌÊ>}iÃÊÌÊ«iViÊLi}ÊVÕÌ°Ê
ÕÌÌ}Ê`>}>ÞÊ>ÞÊ
twist jaws out of line or chip cutting edges.
e. Don't take a full cut on a material when hardness is unknown. Test first with
a slow pressure to see if material is being cut. Remember, the size of the
metal you are cutting is not as important as its hardness.
f. Don't exceed cutter capacity marked on the jaw of tool or rated in the
catalogue.
SAFETY PRECAUTIONS
HARD METALS MAY SNAP OFF OR FLY THROUGH THE AIR WHEN CUT.
79-Ê7
,Ê-
/9Ê--
-Ê Ê7, Ê7",
,-Ê
, 9Ê/"Ê*,
6
/Ê 1,9Ê,"Ê9 Ê
/°Ê"
Ê79Ê/"Ê*,
6
/Ê 1,9Ê,"Ê
9 Ê
/Ê-Ê/"Ê7,*ÊÊ 1,*Ê ]Ê7* Ê
"/Ê",Ê,Ê,"1 Ê/
Ê
1// Ê7-Ê-"Ê
/Ê*
-Ê
"/Ê9°
Prices Herein Do Not Include GST Product depictions are not to scale. 99
ALL APN AND UPC CODE NUMBERS SHOWN ARE PRECEDED BY THE MANUFACTURER APN OR UPC I.D. NUMBER 9337103 & 037103.
s -AXIMUM #APACITY MM
s 2UGGED CONTRACTORS TOOL
s 3HEAR
CUT BLADES
s -OUNTS EASILY ON MOST FLAT SURFACES TO ENHANCE LEVERAGE
s 2EPLACEMENT KIT FOR (+ 0ORTER 2"*. REBAR CUTTER AND BENDER
s ,EFT AND RIGHT
HAND FORGED SHEAR
CUT BLADES
s !SSEMBLY HEAD FORGED FROM ALLOY STEEL CONSTRUCTION FOR DURABILITY
s 3PECIALLY HARDENED BLADES FOR PERFORMANCE
s ASSEMBLY NUTS ASSEMBLY BOLT AND WASHER
s "ENDER &OLLOWER PIN INCLUDES ROLLER SLEEVE ROLLERS SNAP RINGS
s
INCH SPACER FOR USE WITH EARLIER PRODUCT VERSION
2"*
s #UTTING CAPACITY
COPPER MM DIA
s #UTTING CAPACITY
ALUMINIUM MM DIA
s 4OP QUALITY POCKET SIZE CUTTER
s 3HEAR
CUT BLADES
s %XCELLENT CUTTER FOR v HARD
v SOFT WIRE ROPE OR
CABLE PIANO WIRE OR AIRCRAFT CABLE
s 0ACKAGED FOR EASY POINT
OF
PURCHASE DISPLAY
s #ENTRE CUT BLADES
s #UTS MILD STEEL TO v DIAMETER
s #UTS HARD STEEL v DIAMETER
s .EVER USE ANY (+ 0ORTER CUTTERS ON ENERGIZED CIRCUITS
WIRE OR CABLE
100 Prices Herein Do Not Include GST Product depictions are not to scale.
!,, !0. !.$ 50# #/$% .5-"%23 3(/7. !2% 02%#%$%$ "9 4(% -!.5&!#452%2 !0. /2 50# )$ .5-"%2 9337103 &
Compact Cutter
Material DESCRIPTION MMIN !0.50# 3HELF A$ Price
Number 0ACK
PRODUCT
0890SMC Compact Cutter ● 274564 6 34.95
s #O
MOULDED GRIP
s 3PRING ACTION
0RICES (EREIN $O .OT )NCLUDE '34 0RODUCT DEPICTIONS ARE NOT TO SCALE
Crescent® Odd Job Tool Crescent® Lighted Crescent® Ratcheting
Adjustable Wrench Adjustable Wrench
ACL29VS ATR28
Rebar Bender
DB18X & DB30X DB16 & DB24
s %XTRA
STUDY STEEL HANDLES FOR THE TOUGHEST CONDITIONS
s 3UPER
STRONG INDEXING HEAD GRIPS REBAR SECURELY FOR ACCURATE BENDS
s +NURLED HANDLES FOR A MORE SECURE GRIP
s
POSITION INDEXING HEAD ADJUSTS WITH CENTRE PUSH BUTTON TO ALLOW TOTAL
ACCESS FOR MAXIMUM LEVERAGE
s 0USH BUTTON ON 2" EXTENDS BENDER TO INCHES FOR MAXIMUM LEVERAGE
COLLAPSES TO JUST INCHES FOR CONVENIENT STORAGE AND PORTABILITY
H.K. Porter
0RICES (EREIN $O .OT )NCLUDE '34 0RODUCT DEPICTIONS ARE NOT TO SCALE