Mercury slam
Cf pressure
a
Pressure lease valve
Inflation bal
fg ne
One-way valve
Fig. Ps.80
19D Over the globe, unsafe levels of arsenic, which is a tasteless,
odorless, and colorless poison, are present in underground
wells providing drinking water to millions of people. The object
of this project isto identify low-cost, easy-to-deploy. and easy-
to-use treatment technologies for removing arsenie from
drinking water. Technologies considered should include, but
Aot be limited to, applications of smart materials and other
nanotechnology approaches. Write a report critically evaluat-
ing existing and proposed technologies. List at least three
references,
L10D Conduct a term-length design project in the realm of
bioengineering done on either an independent or a small-
35
group basis. The project might involve a device or technique
for minimally invasive surgery, an implantable drug-delivery
device, a biosensor, artificial blood, or something of special
interest to you or your design group. Take several days to
research your project idea and then prepare a brief written
Proposal, including several references, that provides a general
statement of the core concept plus alist of objectives During
the project, observe good design practices such as discussed
in Sec. 13 of Thermal Design and Optimization, John Wiley
& Sons Inc., New York, 1996, by A. Bejan, G, Tsatsaronis, and
‘M.J.Moran, Provide a well-documented final report, including
several references,
11D Conduct a term-length design project involving the
International Space Station pictured in Table 1.1 done on
either an independent or a small-group basis. The project
‘might involve an experiment that is best conducted in a low:
gravity environment, a device for the comfort or use of the
astronauts, or something of special interest to you or your
design group. Take several days to research your project idea
and then prepare a brief written proposal, including several
references, that provides a general statement of the core
concept plus a lst of objectives, During the project, observe
‘good design practices such as discussed in Sec. 1.3 of Thermal
Design and Optimization, Jobn Wiley & Sons Inc., New
York, 1996, by A. Bejan, G. Tsatsaronis, and M. J. Moran,
Provide a well-~locumented final report, including several
references.