Professional Documents
Culture Documents
Drenarea Parcarilor Supraetajate PDF
Drenarea Parcarilor Supraetajate PDF
88
drainage drainage
Parking deck drainage
Parking deck drainage
89
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage
Parking deck drainage
There are two categories of parking deck Drain components such as channels and ground garages (e.g. the industrially
drainage: outdoor drains exposed to the parking deck drains integrated within the used parking areas at shopping centres,
weather, and inside parking decks pro- structure of a multi-storey car park park-and-ride stations, airports).
tected from the weather. Both types have should be permanently watertight and The structural and mechanical loads are
to cope with heavy loads, moisture, and tightly sealed off from the different lay- much higher than those affecting private
the accumulation of water. ACO parking ers. An optimal adhesion bond prevents homes for instance. The transition from
deck drains and channels reliably handle any part of the system becoming loose. building parts in this case have profiles
Gravity drainage
large volumes of rainwater, and are To guarantee this effect, a recess must which can be driven on. Each of the lay-
rugged enough to cope with the harsh be incorporated in the transition zone, ers forming the surface coating extend
conditions associated with rainwater, either built in during construction or cut in this case right up to the join profile.
and the accumulation of snow in winter out afterwards. This recess is subse-
brought in on cars and especially in car quently filled with the coating material. The DN 100 vertical ACO parking deck
wheel arches. The selected sealing system is then laid drains made of cast iron can be equipped
all the way to the drain system. with fire protection inserts where neces-
sary. Parking deck drains need to be
There is much higher traffic exposure in cleaned when required because of the
Syphonic drainage
busy multi-storey car parks and under- large amount of dirt which collects.
Parking deck
drainage
Balcony and terrace
drainage
Facade drainage
ACO drains and channels safely remove water accumulating on parking decks
Pipe systems
90
Parking deck drainage
Contents
Regulations and standards
DIN and DIN EN standards must be com-
plied with when planning and construc-
ting parking deck drains. These stan-
dards also apply to floor drains and flat
roof drains.
Gravity drainage
Load classes
The drain model and the load-bearing
capacity of the grating is selected depen-
ding on the installation location and the
associated traffic load and the use of the
surface. Drains are classified according
to the type of installation situation.
Syphonic drainage
Load classes L15 and M125 are suitable
for parking deck drainage.
Parking deck
parking decks
drainage
Fire protection
State construction regulations specify
the use of fire protection drains in multi-
storey car parks when the distance
between the roof drains and a rising wall ACO parking deck drains and channels are very rugged and can easily cope with the
drainage
In this case, an appropriate fire protec-
tion roof drain without an odour seal
must be installed. This prevents the
spread of fire and smoke into neighbou-
ring parts of the building. Special atten-
tion should be given to the fire resistance
Facade drainage
Drainage type
Gravity drainage systems are recommen-
ded for parking decks with vehicular traf-
fic because of the accumulation of dirt on
Pipe systems
91
Parking deck drainage
4–5 mm
Seal
Coating
10–15 mm
Undercoat
Syphonic drainage
Remove the grating and the sludge Install the fire protection insert into the outlet Install the fire protection cartridge
drainage
3
e.g. using the sealing system produced by Sika, Zürich (www.sika.ch)
92
Parking deck drainage
Contents
Gravity drainage
Setting a Spin flat roof drain, cast iron, The cover plate 5801.00.90 is placed on top Installing the parking deck channel and
DN 100, in a suitable recess, or pouring the of the flat roof drain. constructing the rest of the floor structure
drain into the concrete slab
Syphonic drainage
Sealing3 cast iron parking deck drains
Built-in parking deck drains have to be To achieve this, an approx. 10 – 15 mm
connected with a permanent watertight deep notch is cut into the concrete in the
seal to the coating system. An optimal transition zone and filled with coating ma-
adhesion join prevents parts of the two terial. Each of the sealing layers is then
systems from becoming loose. laid right up to the drain system.
Parking deck
drainage
4–5 mm
Seal
Coating
10–15 mm
Undercoat
Fire protection
Facade drainage
2
e.g. using the sealing system produced by Sika, Zürich (www.sika.ch)
93
Parking deck drainage
1
Gravity drainage
DN 100
Facade drainage
300
110
DN100
Pipe systems
Ø260
16
The outlet socket of the drain body can be shortened on site by max. 35 mm (without fire protection).
Contents
1
Gravity drainage
Top surface coating in
accordance with the
building specifications
Syphonic drainage
structural engineering
specifications)
Parking deck
drainage
galvanised steel bucket,
outlet socket inclination 1.5°,
frame dimensions 300 x 300 mm
Article No. 5935.60.00
16
Facade drainage
50
180
DN 100
3°
339
Pipe systems
00
50
Extension heights in mm
95
Parking deck drainage
5
Gravity drainage
2
The top surface coating
in accordance with the
building specifications
3
Sealing membrane
Reinforced concrete
Syphonic drainage
DN 100
95-110
Facade drainage
246
Pipe systems
Extension heights in mm
96
Parking deck drainage
Contents
2
Gravity drainage
Top surface coating
3 in accordance with
the building specifi-
cations
Sealing membrane
Syphonic drainage
Reinforced concrete
1 Variant-CR drainage channel, 2 Stainless steel lattice grating, 3 Stainless steel drain body
stainless steel, length: 1050 mm MW 22x22 mm, Class M, DN 100
Parking deck
drainage
Article No. 9013.10.10 length: 500 mm Article No. 9390.10.00
Article No. 9306.05.05 (2-piece)
Facade drainage
235
Pipe systems
Warning! Drain bodies for parking deck drainage systems must not be retrofitted with an odour seal!
Extension heights in mm
97
Parking deck drainage
DN 100
Contents
Drain DN 100
Cast iron, construction material
class A1, coated
With galvanised steel bucket
With cast iron grating, slot width
16 mm for load class B/M 125
pursuant to DIN EN 124 – DIN 1229
Gravity drainage
DN100
Ø260
16
Without 35 kg 5935.00.00
300
90°
□300
110
16
Parking deck
drainage
180
□300
3°
Without 40 kg 5935.50.00
339
16
1,5°
Balcony and terrace
DN100
With 40 kg 5935.59.00
□300
drainage
Ø127
Additional components
5935.20.10
in steps of 45 mm
300
Top frame
30
45
Contents
Drain DN 100
With connecting collar
Cast iron, construction material
class A1, coated
With galvanised steel bucket
With cast iron grating, slot width
16 mm for load class B/M 125
Gravity drainage
pursuant to DIN EN 124 – DIN 1229 – DIN 19599/DIN EN 1253
Recess dimensions 350 x 350 mm (vertical model)
50
110
DN100
□260
Scale drawing Outlet socket inclination Gland Weight Article No.
Syphonic drainage
16
50
Without 47 kg 5935.10.00
300
90°
□450
□300
110
With 47 kg 5935.19.00
DN100
50
□260
50
180
Parking deck
16
drainage
180
3°
339
16
1,5°
16
With 52 kg 5935.69.00
drainage
DN100
□300
Ø127
Additional components
Facade drainage
5935.20.10
in steps of 45 mm
300
Top section frame
30
45
DN 100
Contents
Cast iron
No built-in gradient
Load class B/M 125 pursuant to
DIN EN 124/1253/ DIN 1229
Internal longitudinal slotted grating,
gland
Inlet section 340 cm2/m
Gravity drainage
500 141
10
70
31
Channel without
13,0 kg 5801.60.00
Syphonic drainage
outlet socket
160
141
31
10
70
Channel with
moulded outlet 13,2 kg 5801.62.00
110
socket
160
Parking deck
drainage
Accessories
124
Ø275
123 90° socket outlet inclination 13,1 kg 7034.10.10
230
10
drainage
20
DN 100
Longitudinal slotted
123 channel, cast iron
Facade drainage
10 length: 500 mm
20
500
141 13
Cast iron end walls
Ø210
1,2 kg 5801.00.80
500
75
Ø120
10
Pipe systems
19,5
100
Parking deck drainage
Installation recommendation
ACO Variant-CR box channel, stainless steel, material 1.4301* *Material 1.4571 upon request
Contents
Scale drawing Article description
EE
FF
Height at the outlet socket (E): … mm
Ø125
Ø125
Ø198 With support ring and sieve grating
Ø198
Gravity drainage
to trap dirt, with welded end pieces
Channel profile type: NH
MM
Article No. list for the box channels** **Other dimensions upon request
Syphonic drainage
Space between Profile type
socket outlets Weight
Length E Hmin Hmax F NH***
kg
L1 L2 Article No.
550 390 160 205 105 135 65 4,8 9013.10.05
1050 890 160 205 105 135 65 7,2 9013.10.10
1050 525 525 205 105 135 65 7,7 9013.10.11
1550 1390 160 205 105 135 65 9,6 9013.10.15
1550 775 775 205 105 135 65 9,8 9013.10.16
2050 1890 160 205 105 135 65 12,1 9013.10.20
Parking deck
2050 1025 1025 205 105 135 65 12,6 9013.10.21
drainage
2550 2390 160 205 105 135 65 14,5 9013.10.25
2550 1275 1275 205 105 135 65 15,0 9013.10.26
3050 1525 1525 205 105 135 65 17,4 9013.10.30
3550 1775 1775 225 120 200 85 21,5 9013.10.35
4050 2025 2025 225 120 200 85 25,3 9013.10.40
4550 2275 2275 225 120 200 85 27,2 9013.10.45
drainage
Accessories
Scale drawing Product description Weight Article No.
Ø415
Ø215
flange, 9390.10.00
odour seal
235
Stainless steel,
Facade drainage
DN 100
DN100
500 mm
Height adjustment of the box channel in connection with the drain body
Hmax
Hmin
101