Professional Documents
Culture Documents
V236BJ1 LE2 CHIMEIInnolux PDF
V236BJ1 LE2 CHIMEIInnolux PDF
com
PRODUCT SPECIFICATION
ϭ Tentative Specification
ϭ Preliminary Specification
Ϯ Approval Specification
Revision : C3/C5
Customer:
APPROVED BY www.gotolcd.com
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your signature and comments.
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION...................................................................................................................................................5
1.1 OVERVIEW ....................................................................................................................................................5
1.2 FEATURES ....................................................................................................................................................5
1.3 GENERAL SPECIFICATIONS ........................................................................................................................5
1.4 MECHANICAL SPECIFICATIONS ..................................................................................................................6
3. ELECTRICAL CHARACTERISTICS....................................................................................................................................9
3.1 TFT LCD MODULE.........................................................................................................................................9
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION ..................................................................................... 11
3.2.1 LED LIGHT BAR CHARACTERISTICS............................................................................................... 11
www.gotolcd.com
6. INTERFACE TIMING.........................................................................................................................................................18
6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................18
6.2 POWER ON/OFF SEQUENCE.....................................................................................................................21
8. PRECAUTIONS ..................................................................................................................................................................27
Version 3.0 2 DateΚJul. 3 2014
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
www.gotolcd.com
From 【液晶之家】— www.fpdclub.net
www.gotolcd.com
PRODUCT SPECIFICATION
9. DEFINITION OF LABELS..................................................................................................................................................29
9.1 MODULE LABEL..........................................................................................................................................29
9.2 CARTON LABEL ..........................................................................................................................................30
www.gotolcd.com
PRODUCT SPECIFICATION
REVISION HISTORY
Version Date Page(New) Section Description
3.0 Jun.3 2014 All All The Approval Specification was first Issued.
www.gotolcd.com
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V236BJ1-LE2 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins 1ch-LVDS
interface. This module supports 1366 x 768 HDTV format and can display up to 16.7M (8 bit) colors. The
converter module for Backlight is not built in.
1.2 FEATURES
Ё High brightness (250 nits)
Ё High contrast ratio (3000:1)
Ё Fast response time (Gray to gray average 8.5 ms)
Ё High color saturation (NTSC 72%)
Ё HDTV (1366 x 768 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
Ё LVDS (Low Voltage Differential Signaling) interface
Ё Optimized response time for 60 Hz frame rate
Ё Ultra wide Viewing Angle: Super MVA Technology
Ё RoHS compliance.
www.gotolcd.com
Power consumption 22.428 (Max.) [Cell PW 5.928 W (Max.) + BLU PW 16.500 (Max.)] Watt (2)
Display Colors 16.7M color -
Display Operation Mode Transmissive Mode / Normally Black - -
PRODUCT SPECIFICATION
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth is between bezel to real.
www.gotolcd.com
PRODUCT SPECIFICATION
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 70 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 70 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
www.gotolcd.com
PRODUCT SPECIFICATION
Value
Item Symbol Unit Note
Min. Max.
(1) (2)
IF Ё 230 243.8 mA
Input Pin Duty=100%
LED Pulse Forward Pulse WidthЉ10msec.
IFP Ё Ё 450 mA
Current Per Input Pin and DutyЉ25%
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for input pin of LED light bar at Ta=25±2 к (Refer to 3.2 for further
information).
PRODUCT SPECIFICATION
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
PRODUCT SPECIFICATION
www.gotolcd.com
c. Horizontal Pattern
PRODUCT SPECIFICATION
IL = 230mA
LED Light Bar Current (1), (2)
IPIN Ё 230 243.8 mA
Per Input Pin Duty=100%
(1), (2)
Power consumption PBL Ё 14.5 16.5 W Duty=100%,
IL = 230mA
LED Life time LLED 30,000 Ё Ё Hrs (3)
Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown
below:
Note (2) PBL(Typ.)= IPIN(Typ.) × VPIN(Typ.) × ( 2 ), PBL(Max.)= IPIN(Typ) × VPIN(Max.) × ( 2 ) input pins ,
Note (3)The lifetime of LED is defined as the time when LED packages continue to operate under the
conditions at Ta = 25 ±2 к and (I= 200mA) (per chip) until the brightness becomes Љ 50% of its
original value.
VPIN2 , IPIN2
Function
generator
PRODUCT SPECIFICATION
X+C Board
www.gotolcd.com Pin 1
Light bar
Pin 1 define
CN 1
PRODUCT SPECIFICATION
SCAN DRIVER IC
ʳ RX0(+/-)
TFT LCD PANEL
(1366x3x768)
ʳ RX1(+/-)
P-TWO 187098-30091
RX2(+/-)
INPUT CONNECTOR
ʳ TIMING
RX3(+/-)
ʳ RXCLK(+/-)
CONTROLLER
ʳ
DATA DRIVER IC
ʳ
ʳ SELLVDS
DC/DC CONVERTER &
ʳ REFERENCE VOLTAGE
Vcc
ʳ
GND
ʳ
ʳ
ʳ
ʳ
ʳ
www.gotolcd.com
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION
3.3V
System Board Panel Board
>16K ohm
1K ohm
IC
www.gotolcd.com
Note (5) LVDS connector mating dimension range request is 0.93mm~1.0mm as below.
Note (6) The screw hole which is distant from the connector is merged with Ground.
PRODUCT SPECIFICATION
www.gotolcd.com
PRODUCT SPECIFICATION
: : : : : : : : : : : : : : : :
Of
Green (253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green
Green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Blue (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue (2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Blue (253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
Blue
Blue (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Note (1) 0: Low Level Voltage, 1: High Level Voltage
PRODUCT SPECIFICATION
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram. (Ta = 25 ± 2 ºC)
Fr5 47 50 53 Hz
Frame Rate -
Fr6 57 60 63 Hz
Vertical
Active Total Tv 776 806 1050 Th Tv=Tvd+Tvb
Display
Term Display Tvd 768 768 768 Th -
Note (1) Please make sure the range of frame rate has follow the below equationΚ
Fclkin(max) Њ Fr6 Ѽ Tv Ѽ Th
Fr5 Ѽ Tv Ѽ Th Њ Fclkin(min)
PRODUCT SPECIFICATION
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ
INPUT SIGNAL TIMING DIAGRAM
Tv
Tvd
Tvb
DE
Th
DCLK
Tc
Thd
Thb
DE
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
www.gotolcd.com
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
PRODUCT SPECIFICATION
Note (5) LVDS receiver skew margin is defined and shown as below.
LVDS RECEIVER INTERFACE TIMING DIAGRAM
www.gotolcd.com
PRODUCT SPECIFICATION
0.1VCC 0.1Vcc
0V
0.5ЉT1Љ 10ms T1 T3
0ЉT2Љ200ms
0ЉT3
500ms ЉT4 T2
T4
VALID
LVDS Signals
0V
Power On P
0ЉT7ЉT2
0ЉT8ЉT3
T7 T8
Option Signals
(SELLVDS)
www.gotolcd.com
T5 T6
PRODUCT SPECIFICATION
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 1
hour in a windless room.
www.gotolcd.com
PRODUCT SPECIFICATION
Rx 0.643 -
Red
Ry θx=0°, θy =0° 0.339 -
Viewing angle
Gx at normal direction 0.316 -
Green
Gy 0.613 -
Typ. Typ.
(1)(4)
Color -0.03 +0.03
Bx 0.152 -
Chromaticity
Blue
By www.gotolcd.com
0.054 -
Wx 0.285 -
White
Wy 0.293 -
θx+ 80 89 Ё
Horizontal
θx- 80 89 Ё
Viewing Angle CR≥10 Deg. (1)(4)
θY+ 80 89 Ё
Vertical With INX Module
θY- 80 89 Ё
PRODUCT SPECIFICATION
Normal
θx = θy = 0̓
θy- θy+
6 o’clock
y- x+ θX+ = 90̓
θy- = 90̓
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note(7).
100%
90%
Optical
Response
10%
0%
Time
Gray to gray Gray to gray
switching time switching time
The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255..
Gray to gray average time means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191,
223 and 255 to each other.
PRODUCT SPECIFICATION
LCD M odule
LCD P anel
CS-2000T or equivalent
(D, W) (D, W)
YA, D (D/2,7W/8) YB, D (D/2,7W/8)
PRODUCT SPECIFICATION
W/4 1 2
Vertical Line
3 4
Active Area
www.gotolcd.com
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[1] Do not apply rough force such as bending or twisting to the module during assembly.
[2] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[3] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape.
[4] It should be attached to the system firmly using all mounting holes.
[5] It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust
and oil may cause electrical short or worsen the polarizer, do not press or scratch the surface harder than a
HB pencil lead.
[6] Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly
process.
[7] Protection film for polarizer on the module should be slowly peeled off just before use so that the electrostatic
charge can be minimized.
[8] Do not disassemble the module.
[9] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMOS LSI chips.
[10] Do not plug in or pull out the I/F connector while the module is in operation, pins of I/F connector should not
be touched directly with bare hands. Do not adjust the variable resistor located on the module.
[11] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
www.gotolcd.com
scratched. Water, IPA (Isoproyl Alcohol) or Hexane are desirable cleaners. Do not use Ketone type materials
(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the
polarizer due to chemical reaction.
[12] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[13] When storing modules as spares for a long time, the following precaution is necessary.
[13.1] Do not leave the module in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35к at normal humidity (under 70%)
without condensation.
[13.2] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[14] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of LED will be higher than that of room
temperature.
PRODUCT SPECIFICATION
After the module’s end of life, it is not harmful in case of normal operation and storage
UL UL60950-1:2006 or Ed.2:2007
UL UL60065 Ed.7:2007
PRODUCT SPECIFICATION
9. DEFINITION OF LABELS
9.1 MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
V236BJ1-LE2
XXXXXXXYMDLNNNN
BN07-01378A
XX/XX
E-PASS CMN61E2XXXXXLXXLYMDNNNN
PRODUCT SPECIFICATION
P.O. NO.
Parts ID.
Revision
PRODUCT SPECIFICATION
10. PACKAGING
10.1 PACKING SPECIFICATIONS
(1) 11 LCD modules / 1 Box
(2) Box dimensions: 620(L) X 348(W) X 430(H) mm
(3) Weight: approximately: 30.5kg (11 modules per box)
www.gotolcd.com
PRODUCT SPECIFICATION
Corner Protector
(50*50*1000mm)
PP Belt
Corner Protector
Film
(50*50*800mm)
PE Sheet
Pallet
Pallet (1250*1050*143mm)
(1250*1050*143mm)
Carton label
Carton label
www.gotolcd.com
For air
PP Belt
Corner Protector
(50*50*1000mm)
PE Sheet
Corner Protector
(50*50*1250mm)
Film
Pallet
(1250*1050*143mm)
Carton label
PRODUCT SPECIFICATION
Remove
Cushion(Top)
Take Panel Out
Cut Tape ,Then Put in Protective Tools
Open Carton (provide by customer-self)
www.gotolcd.com
PRODUCT SPECIFICATION
www.gotolcd.com
PRODUCT SPECIFICATION
www.gotolcd.com