2) PT-200 Body Tube 35.2cm l BT-50 13 7/8” l 3) 2 x PT-100 Body Tube 17.8cm l 2 x BT-20 7” l 4) ET-100 Engine Tube BT-20 2.75” l 5) PN-200 Nose Cone custom turned balsa cone 6) Centering Rings x 2 CR2050 x 2 7) Engine retainer 70mm engine hook 8) Parachute 30cm 12” parachute 9) Shroudline shroudline 72” l 10) Tape discs x 8 Tape discs x 6 or 8 11) Shock Chord 1/8” elastic chord 24” l 12) Launch Lug 1/8” Launch lug 13) balsa sheets x 4 1/16” balsa as needed 14) large vacuform body detail panel not available at this time 15) small vacuform body detail panel not available at this time 16) 6mm rigid plastic tubing 30.5 cm l ¼” x 12” rigid plastic tubing 17) 3mm rigid plastic tubing 18.4 cm l 1/8”x 7.25” rigid plastic tubing 18) 6mm rigid plastic tubing 16.5 cm l ¼” x 6.5” rigid plastic tubing 19) Decal sheets reprodecals