You are on page 1of 6

Page 1 of 6

June 12, 2014


AsahiGuard E-SERIES AG-E860
X-1537GHS-04

SAFETY DATA SHEET


in accordance with Globally Harmonized System of Classification of Chemicals

No. X-1537GHS-04
Identity (As Used on Label and List)
Revised Date: June 12, 2014
Prepared Date: June 25, 2010

AsahiGuard E-SERIES AG-E860


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING

1.1 Identification of the substance or preparation


Product name: AsahiGuard E-SERIES AG-E860
Chemical name: Fluoropolymer aqueous solution

1.2 Use of the substance/preparation


paper treatment

1.3 Company/undertaking identification


Manufacturer's Name
ASAHI GLASS CO.,LTD. Chemicals Company
Address
1-5-1, Marunouchi, Chiyoda-ku, Tokyo 100-8405, Japan
Telephone Number for Information
+81-3-3218-5504
Facsimile Number for Information
+81-3-3218-7843

2. HAZARDS IDENTIFICATION

Application of the classification rules in GHS

PHYSICAL HAZARDS
Flammable liquid not classified
Pyrophoric liquid not classified

HEALTH HAZARDS
Acute toxicity(oral) not classified
Skin corrosion(irritation) not classified
Eye damage(irritation) not classified
Germ cell mutagenicity not classified
Carcinogenicity Classification not
possible
Toxic to reproduction not classified
Specific target organ systemic toxicity after single exposure not classified
Specific target organ systemic toxicity after repeated exposure not classified
Aspiration toxicity not classified
Page 2 of 6
June 12, 2014
AsahiGuard E-SERIES AG-E860
X-1537GHS-04

HAZARDOUS TO THE AQUEOUS ENVIRONMENT


Acute not classified
Chronic not classified

Signal word:None

Hazard statement
None.

Other hazards
Inhalation of aerosol or fine spray mist may cause serious respiratory problems.
Inhale thermal decomposition products or smoking of contaminated tobacco goods leads after 2 - 6
hours to the so-called "fluorine polymer fever" (= allergic alveolitis with flu-like illness).
Danger of the formation of a pulmonary edema after substantial intoxication by thermal
decomposition products.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Components
CAS-No Name % Weight
Trade Secret Fluoropolymer 20
64-19-7 Acetic acid <1
Water >79

4. FIRST-AID MEASURES

 Inhalation:
If inhaled, remove the affected individual immediately to fresh air.
Call a physician if respiratory irritation develops or if breathing becomes difficult.
 Skin Contact:
Wash affected areas with plenty of water and soap for several minutes.
Call a physician if irritation develops.
 Eye Contact:
First rinse eyes with water. Remove any contact lenses, and continue washing with running
water for at least 15 minutes. Call a physician if irritation develops.
 Ingestion:
If swallowed seek medical immediately and show the doctor packing or label. Give 3-4
glasses of water, but do not induce vomiting. If vomiting continues, give water again. Do
not give anything to an unconscious or convulsing person.

5. FIRE-FIGHTING MEASURES

 Suitable extinguishing media: Use dry chemical, alcohol-resistant foam, water spray or
carbon dioxide for surrounding fire.
 Unsuitable extinguish media/methods: none
 Hazardous combustion product or gases: This product is non-flammable. However, if
involved in a fire or if overheated (>220deg.C), there is a risk of generation of toxic
degradation products such as: hydrogen fluoride, carbonyl fluoride, carbon monoxide, and
carbon dioxide. Between 425-450deg.C, toxic particulate with a size of 0.2-0.5μm may be
Page 3 of 6
June 12, 2014
AsahiGuard E-SERIES AG-E860
X-1537GHS-04
generated by heat degradation. Over 470deg.C, perfluoro isobutylene may be generated by
heat degradation.
 Special protective equipment for fire fighters: Wear self-contained breathing apparatus in
confined areas or when exposed to combustion products.

Additional Information: Move container from fire areas if it can be done without risk. Cool
containers with water spray. Fire residues and contaminated firefighting water must be disposed of
in accordance with the local regulations.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions:
Ensure adequate ventilation.
Use personal protective clothing
Environmental precautions:
Collect contaminated water/firefighting water separately.
Do not wash away into shower or waterway.
Methods for cleaning up/taking up:
Take up with absorbent material (e.g. sand, general-purpose binder)

Additional information:
Information for safe handling looks up chapter 7.
Information for disposal looks up chapter 13.

7. HANDLING AND STORAGE

Handling
Avoid contact with eyes.
Avoid circumstances that release respirable particles.
For spray applications, use a coarse spray device such as trigger sprayer or pressurized dispenser
with particle size production of greater than 15 microns.
Adjust spray pressure to keep particle size greater than 15 microns. DO NOT aerosolize or atomize.
Suitable ventilation must be used during application.
Do not breathe spray. During fumigation/spraying wear suitable respiratory equipment.

Storage
Keep container tightly closed. Keep away from heat, and sunlight.
Storage temperature range: 0-40deg.C
If material freezes, gently thaw prior to use. Mild agitation may be required.

8. EXPOSURE CONTROL / PERSONAL PROTECTION

Ingredients with occupational exposure limits to be monitored

Ingredient name: Acetic acid


MAK-Values(2013): N/E
ACGIH (2014) TLV-TWA: TLV-TWA: 10ppm, STEL, 15ppm

Exposure controls
occupational exposure controls
Engineering Controls:
Use suitable ventilation to remove spray mists and vapor or fume generated by applications where
the fluoropolymers will be exposed to elevated temperatures.
Page 4 of 6
June 12, 2014
AsahiGuard E-SERIES AG-E860
X-1537GHS-04

Personal protection:
 Respiratory protection: An air purifying respirator with organic vapor cartridge or canister.
Use NIOSH approved respirator where there is likelihood of
inhalation of the product mist.
Acetic acid has TWA, if its concentration is greater than the
exposure limits, use protective equipment.
 Skin protection: Protective gloves
 Eye protection: Chemical goggles

Additional recommendations: An eyewash and safety shower should be nearby and ready for use.
Hands should be washed thoroughly after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

 Appearance: liquid, pale yellow to brown


 Odour: of acetic acid
 Odour threshold: N/D
 pH value in delivery state: 2.9-5.9(25deg.C)
 Melting Point: N/D
 Boiling Point: > 100 °C
 Flash Point (Method Used): non flammable (Cleveland open cup)
 Evaporation Rate (Ethyl ether = 1): N/D
 Flammability: N/A
 Flammable Limits: LEL=N/D; UEL=N/D
 Vapour Pressure: N/D
 Vapour Density (Air = 1): N/D
 Specific Gravity: 1.04-1.12 (at 25deg.C)
 Solubility in Water: dispersible
 Partition coefficient, n-octanol/water: N/D
 Auto-ignition temperature: N/D
 Viscosity: N/D
 Explosive properties: not explosive
 Oxidising properties: not oxidising

10. STABILITY AND REACTIVITY

Conditions to avoid:
Avoid contact with heat.
Avoid long storage periods in more than 40deg.C, since the product degrades with age.

Stability: Stable under normal temperature and pressure.

Materials to avoid (Incompatibilities): Oxidizers, alkalis.

Hazardous decomposition products: In a fire situation, hydrogen fluoride, carbonyl fluoride,


carbon monoxide and carbon dioxide may liberate.

11. TOXICOLOGICAL INFORMATION

Health Hazardous (Acute and Chronic):


Acute toxicity:
LD50(rat): >2500 mg /kg OECD No.423
Page 5 of 6
June 12, 2014
AsahiGuard E-SERIES AG-E860
X-1537GHS-04
Acute Dermal Irritation (Rabbit) index0.0 Non-Irritant (OECD404)
Acute Eye Irritation (Rabbit) Class4 Mild Irritant (OECD405)
Sensitization: Negative (LLNA)

Mutagenicity:
 Ames Assay: negative OECD No.471 (Fluoropolymer)
 Chromosomal aberration test: negative (Fluoropolymer)
Repeated Dose Toxicity (28day.rat. Oral.)
NOEL=1000mg/kg/day(Fluoropolymer)

Carcinogenicity
All ingredients are not listed by NTP, IARC or OSHA as carcinogens.

12. ECOLOGICAL INFORMATION

COD 46,000 mgO2/l JIS.K.0102.17


BOD 5 d 7,100 mgO2/l JIS.K.0102.21 and 32.3

Biodegradability: Not to be readily biodegradable (OECD301C) (Fluoropolymer)


Bioaccumulation: BCF 6.7-13 (Fluoropolymer)

Other information:
Fish, Acute Toxicity Test: NOEC=>100mg/L, 96h (Medaka);OECD No.203(Fluoropolymer)
Alga, Growth Inhibition Test: NOEC=>100mg/L, 72h ;OECD No.201(Fluoropolymer)
Daphnia sp., Acute Immobilisation Test : NOEC=>100mg/L, 48h ;OECD No.202(Fluoropolymer)

13. DISPOSAL CONSIDERATIONS

Waste Disposal Method


Reuse when possible the residual product. Send waste product for thermal destruction, using high-
temperature incinerators designed to burn fluorine compounds.
Reuse containers when possible, after thorough washing. Dispose of waste containers to authorized
landfill, in accordance with local laws and regulations.

Do not dump this product into sewers, on the ground or into any body of water

14. TRANSPORT INFORMATION

This product is not the dangerous goods within the meaning of Recommendations on the Transport
of Dangerous Goods Model Regulations by UNITED NATIONS.

15. REGULATORY INFORMATION

Ensure this material in compliance with federal requirements and ensure conformity to local
regulation.

Other information
Regulations
Page 6 of 6
June 12, 2014
AsahiGuard E-SERIES AG-E860
X-1537GHS-04
TSCA Status: TSCA 5(e) is applicable. Only AGC Chemicals Americas can import this product.
TSCA12(b) is applicable.

Council Directive 92/32/EEC Status: All monomers and ingredient are listed in the EINECS.

CANADA Status:
All components are listed on DSL.

Requirements
Please contact your supplier for further information.

16. OTHER INFORMATION

N/D: no data
N/A: not applicable
N/E: not established
MAK: maximum workplace concentration
ACGIH: American Conference of Governmental Industrial Hygienists

Changes were made in sections: Section 1,2,7,12 (2011.10), 15(2012.12), 2 (2014.6)

The product is not designed for special applications such as pharmaceutical, medical use.
This Safety Data Sheet is offered only for your information, consideration and investigation. Asahi
Glass Co., Ltd. provides no warranties, either express or implied, and assumes no responsibility for
the accuracy or completeness of the data contained herein.

You might also like