Professional Documents
Culture Documents
SAS SYSTEMS
SAS Gewindestäbe
SAS thread bars
max dA [mm] 14 16 19 23 29 32 36 45 56 63 70 82
Fyk (F0,2k) [kN] 57 77 100 160 245 310 405 630 980 1441 1760 2209
Ftk [kN] 62 85 110 175 270 340 440 690 1080 1818 2215 2430
A [mm2] 113 154 201 314 491 616 804 1260 1960 2597 3167 4418
G [kg/m] 0,89 1,21 1,58 2,47 3,85 4,83 6,31 9,87 15,40 20,38 24,86 34,68
1)
Prozentuale Gesamtdehnung bei Höchstlast / percentage total elongation at maximum force
Die Gewichtsangaben von Stab und Zubehör sind Mittelwerte. Die tatsächlichen Gewichte können auf Grund von Fertigungstoleranzen
abweichen. / Weight specifications of bar and accessories are average values. The actual values may deviate due to fabrication tolerances.
2
SAS Gewindestäbe
SAS thread bars
SAS 550 Ø 12 - 50 mm
d [mm] 12 14 16 20 25 26 28 30 32 36 40 50
max dA [mm] 14 16 19 23 29 30 32 34 36 41 45 56
Fyk (F0,2k) [kN] 62 85 110 175 270 290 340 390 440 560 690 1080
Ftk= 1,08 x Fyk [kN] 67 92 119 189 292 313 367 421 475 605 745 1166
A [mm2] 113 154 201 314 491 531 616 707 804 1020 1260 1960
G [kg/m] 0,89 1,21 1,58 2,47 3,85 4,17 4,83 5,55 6,31 7,99 9,87 15,40
1)
Prozentuale Gesamtdehnung bei Höchstlast / percentage total elongation at maximum force
3
SAS Projekt: Ten Park Museum, Miami, USA
SAS project: Ten Park Museum, Miami, USA
4
5
Zubehör / accessories
SAS SYSTEMS Ankermutter gerade Ankermutter lang Ankermutter mit Bund Ankerplatte gerade
anchor nut flat anchor nut long anchor nut with flange anchor plate flat
Ankerplatte gerade
SAS SYSTEMS klein
Kontermutter lang Kontermutter kurz Ankerstück
lock nut long lock nut short anchor piece
anchor plate flat small
12 - - 19 x 20 0,03 19 x 13 0,03 - -
14 - - 27 x 25 0,08 27 x 15 0,06 - -
16 - - 32 x 30 0,15 32 x 20 0,10 30 x 33 x 50 0,19
20 - - 32 x 40 0,16 32 x 20 0,08 36 x 40 x 65 0,36
25 - - 41 x 40 0,25 41 x 20 0,14 41 x 45 x 70 0,50
26 - - 41 x 45 0,26 41 x 25 0,15 41 x 50 x 90 0,70
28 - - 41 x 45 0,26 41 x 25 0,15 46 x 50 x 90 0,77
30 - - 50 x 50 0,52 50 x 30 0,28 50 x 55 x 95 1,00
32 - - 50 x 50 0,47 50 x 30 0,28 50 x 60 x 100 1,34
36 - - 55 x 55 0,61 55 x 30 0,37 60 x 65 x 110 1,70
40 120 x 17 x 45 1,69 60 x 65 0,83 60 x 35 0,45 65 x 70 x 120 1,89
50 150 x 20 x 58 3,12 80 x 80 1,94 80 x 50 1,21 80 x 85 x 150 3,38
57,5 - - 90 x 80 x 102 2,87 90 x 60 x 102 2,08 90 x 100 x 175 5,55
63,5 - - 90 x 115 x 102 3,55 90 x 75 x 102 2,18 100 x 115 x 250 11,50
75 - - 100 x 80 x 108 2,37 100 x 80 x 108 2,12 120 x 120 x 220 11,24
6
Zubehör / accessories
SAS SYSTEMS Kugelbundmutter 55° Ankerplatte Konus 55° Kalottenmutter 30° Ankerplatte ballig 30°/55°
domed nut 55° anchor plate cone 55° dome nut 30° domed washer 30°/55°
SAS SYSTEMS Ankermutter ballig 30° Ankerplatte Konus 30° Ankerstück geschweißt Ankerplatte Konus 30° groß
bull nose nut 30° anchor plate cone 30° anchor piece welded anchor plate cone 30° big
7
Zubehör
accessories
SAS SYSTEMS Muffe standard Gewindestahlmuffe Kontaktmuffe Sechskantmuffe lang
coupler standard thread bar coupler contact coupler hexagonal coupler long
12 22 x 60 0,11 - - - - 22 x 80 0,17
14 27 x 75 0,22 - - - - 27 x 100 0,34
16 32 x 90 0,37 26,5 x 31 x 90 0,27 - - 32 x 120 0,59
20 36 x 105 0,52 32 x 37 x 105 0,40 32 x 70 0,22 32 x 140 0,54
25 40 x 115 0,61 40 x 46 x 115 0,68 36 x 80 0,30 41 x 160 1,08
26 45 x 120 0,91 47 x 53 x 120 1,13 36 x 80 0,26 41 x 170 1,08
28 45 x 125 0,85 47 x 53 x 125 1,09 40 x 85 0,34 41 x 180 1,02
30 50 x 135 1,19 47 x 53 x 135 1,10 45 x 90 0,46 50 x 180 1,71
32 52 x 140 1,32 57 x 64 x 140 1,92 45 x 90 0,46 50 x 180 1,71
36 60 x 150 1,92 57 x 64 x 150 1,78 50 x 120 0,73 60 x 180 2,75
12 - - - - - - 32 x 130 0,62
14 - - - - - - 32 x 140 0,69
16 16/14 x 32 x 120 0,62 - - 16/14 x 32 x 120 0,55 36 x 150 0,92
20 20/16 x 32 x 140 0,65 - - 20/16 x 36 x 130 0,67 41 x 175 1,12
25 25/20 x 41 x 175 1,33 - - 25/20 x 40 x 150 1,00 46 x 190 1,42
26 26/20 x 41 x 175 1,31 - - 26/20 x 40 x 155 1,10 50 x 205 1,83
28 28/25 x 41 x 220 1,80 - - 28/25 x 45 x 170 1,24 50 x 205 1,78
32 32/28 x 50 x 230 2,41 52 x 140 1,35 32/28 x 52 x 180 1,80 60 x 225 2,87
36 36/32 x 60 x 245 3,10 60 x 150 2,00 36/32 x 60 x 235 2,91 70 x 250 5,20
40 40/32 x 65 x 260 5,00 65 x 160 2,35 40/32 x 65 x 240 3,90 80 x 270 6,60
50 50/40 x 80 x 290 7,48 80 x 200 4,50 50/40 x 80 x 240 6,00 100 x 310 15,66
57,5 - - 102 x 230 9,45 57,5/50 x 90 x 280 7,99 100 x 325 17,72
63,5 - - 102 x 260 9,50 63,5/57,5 x 102 x 310 11,56 100 x 390 22,21
75 - - 108 x 240 8,02 75/63,5 x 108 x 310 11,37 100 x 330 16,09
8
Zubehör
accessories
Anschweißstück mit
SAS SYSTEMS Muffe vergütet Anschweißstück
Schlüsselfläche
Anschweißstück SW
coupler tempered welding bolt welding bolt hexagonal
welding bolt with wrench flat
9
Zubehör / accessories
SAS SYSTEMS Muffe angeschrägt Gabelstück Spreizdübel Ringmutter
coupler chamfered fork piece expansion shell ring nut
12 - - - - - - - -
14 - - - - - - - -
16 - - - - 32 x 92 0,22 32 x 110 x 54 x 16 0,57
20 36 x 105 0,42 30 x 20 x 120 1,17 39 x 110 0,45 36 x 120 x 59 x 16 0,67
25 40 x 115 0,50 30 x 20 x 120 1,10 49 x 120 0,63 41 x 130 x 64 x 16 0,77
26 - - - - - - - -
28 45 x 125 0,74 - - 49 x 120 0,57 46 x 145 x 74 x 16 0,97
30 - - - - - - - -
32 52 x 140 1,22 - - 59 x 150 1,02 55 x 165 x 89 x 16 1,34
36 - - - - - - - -
SAS SYSTEMS Ankermutter EP gerade Ankermutter EP lang Ankermutter EP ballig 30° Kontermutter EP lang
anchor nut EP flat anchor nut EP long bull nose nut EP 30° lock nut EP long
Zulassungen
approvals
www.annahuette.com www.annahuette.com
11
SAS Gewindestäbe / SAS thread bars SAS SYSTEMS
Streckgrenze / Zugfestigkeit Nenn-ø Strecklast Bruchlast Fläche Gewicht Dehnung
yield stress / ultimate stress nom.-ø yield load ultimate load cross section area weight elongation
Anwendungsbereiche /areas of application
[mm] [kN] [kN] [mm2] [m/to] [kg/m] Agt [%] A10 [%]
SAS 500 / 550 - grade 75
12 57 62 113 1123,6 0,89
14 77 85 154 826,4 1,21
Bewehrungstechnik / 16 100 110 201 632,9 1,58
reinforcing systems 20 160 175 314 404,9 2,47
25 245 270 491 259,7 3,85
6 10
28 310 340 616 207,0 4,83
32 405 440 804 158,5 6,31
Geotechnik / geotechnical systems
40 630 690 1260 101,3 9,87
50 980 1080 1960 64,9 15,40
SAS 555 / 700 - grade 80 57,5 1441 1818 2597 49,1 20,38 5 new
SAS 555 / 700 - grade 80 63,5 1760 2215 3167 40,2 24,86 5
SAS 500 / 550 - grade 75 75 2209 2430 4418 28,8 34,68 5 new
Zubehör für alle Abmessungen und Anwendungen lieferbar / accessories for all dimensions and applications available
Stahlwerk Annahütte
Max Aicher GmbH & Co. KG
Werk 3+4 • 83404 Hammerau • Deutschland
Tel. +49 (0) 8654 487 0 • Fax +49 (0) 8654 487 968
stahlwerk@annahuette.com • www.annahuette.com
Max Aicher Unternehmensgruppe