Professional Documents
Culture Documents
CHEMICAL RESISTANCE
INTRODUCTION
Design Features
With more than 10 years of experience in manufacturing acid and/or
synthetic vapor centrifugal blower for industrail work, we have
gradually developped our product to be highly recognized and
satisfied by customers in types of industry
The ASIA BLOWER is FRP blower designed so that all parts exposed
to the airstream are constructed of high-quality corrosion-resistant
fiberglass reinforced plastic(FRP). The FRP blower is resistant to
attack from most chemicals and is ideally suited to applications in
the chemical, pulp and paper, wastewater-treatment, fertilizer,
pharmaceutical, Electronics, battery, rubber gloves, galvanizes and
steel industries.
Flanged inlet and outlet provide easy joint to duct and flexible hose.
Specification
PERFORMANCE RANGE MOTOR CONNECTION FLANGE WEIGHT MAXIMUM
TRANSMISSION
MODEL FLOW RATE HEAD RUNNING POWER CONSUMTION REQUIREMENTS IN OUT TOTAL
TYPE
(Q) (Ht) SPEED LET LET SET SPEED POWER
(m3/s) (mm.Wg) (RPM) KW HP volt Phase Poles (mm) (mm) (Kg) (RPM) (HP)
GC-180D 0.06/0.11 8.0/28 1450/2800 0.01/0.10 0.02/0.14 380 3 2,4 180 180 22 DIRECT 2800 0.5
GC-200D 0.07/0.15 10.0/40 1450/2800 0.02/0.18 0.03/0.24 380 3 2,4 200 200 26 DIRECT 2800 0.5
GC-250D 0.15/0.31 15/55 1450/2800 0.07/0.55 0.10/0.74 380 3 2,4 250 250 33 DIRECT 2800 1
GC-300D 0.30/0.81 25/65 1450/2800 0.24/0.76 0.32/1.04 380 3 2,4 300 300 40 DIRECT 2800 2
GC-180A 0.10 25 2600 0.07 0.10 380 3 2,4 180 180 25 BELT 2800 0.5
GC-180B 0.08 30 2600 0.04 0.05 380 3 2,4 180 180 25 BELT 2800 0.5
GC-200A 0.14 30 2600 0.13 0.17 380 3 2,4 200 200 28 BELT 2800 0.5
GC-200B 0.12 35 2600 0.08 0.11 380 3 2,4 200 200 28 BELT 2800 0.5
GC-250A 0.28 45 2600 0.40 0.54 380 3 2,4 250 250 35 BELT 2800 1
GC-250B 0.20 65 2600 0.17 0.23 380 3 2,4 250 250 35 BELT 2800 1
GC-300A 0.50 65 2600 0.99 1.33 380 3 2,4 300 300 45 BELT 2800 2
GC-300B 0.40 80 2600 0.46 0.62 380 3 2,4 300 300 45 BELT 2800 2
GC-350A 0.72 90 2450 1.43 1.92 380 3 2,4 350 350 85 BELT 2800 3
GC-350B 0.58 100 2450 0.84 1.12 380 3 2,4 350 350 85 BELT 2800 3
GC-450A 1.80 120 2250 3.95 5.30 380 3 2,4 450 450 95 BELT 2800 5.5
GC-450B 0.85 155 2250 2.11 2.83 380 3 2,4 450 450 95 BELT 2800 5.5
GC-500A 2.36 125 2100 5.06 6.78 380 3 4 500 350x500 310 BELT 2600 15
GC-500B 1.29 160 2100 5.73 7.68 380 3 4 500 350x500 310 BELT 2600 15
GC-600A 3.39 130 1750 7.30 9.78 380 3 4 600 420x600 385 BELT 2200 20
GC-600B 1.46 170 1750 7.61 10.20 380 3 4 600 420x600 385 BELT 2200 20
GC-700A 4.76 135 1550 10.94 14.67 380 3 4 700 520x700 455 BELT 1750 25
GC-700B 2.64 175 1550 12.40 16.62 380 3 4 700 520x700 455 BELT 1750 25
GC-800A 6.66 150 1450 17.43 23.37 380 3 4 800 560x800 490 BELT 1600 30
GC-800B 4.11 185 1450 19.03 25.51 380 3 4 800 560x800 490 BELT 1600 30
GC-900A 8.86 170 1350 25.42 34.07 380 3 4 900 700x900 580 BELT 1450 40
GC-900B 5.46 200 1350 27.71 37.14 380 3 4 900 700x900 580 BELT 1450 40
GC-1000A 11.26 180 1250 34.13 45.75 380 3 4 1000 720x1000 640 BELT 1350 50
GC-1000B 6.93 215 1250 37.15 49.80 380 3 4 1000 720x1000 640 BELT 1350 50
GC-1200A 13.91 135 900 31.74 42.55 380 3 4 1200 815x1220 780 BELT 950 75
GC-1200B 8.67 160 900 34.81 46.67 380 3 4 1200 815x1220 780 BELT 950 75
GC-1400A 28.20 145 850 62.40 84.00 380 3 4 1447 820x1423 1040 BELT 900 100
GC-1400B 15.70 160 850 33.40 45.00 380 3 4 1447 820x1423 1040 BELT 900 100
SPECIFICATION
Dimension F
E
J I G
G
E
F
O
A
H
N1
K D C B
M1 L1
(mm.)
MODEL A B C D E F G H I J K L1 L2 L3 L4 L5
GC-180 460 330 178 52 250 225 180 337 233 156 304 233 216 184 215 316
GC-200 485 350 162 54 270 235 200 357 252 167 334 252 237 215 239 345
GC-250 600 400 198 81 360 310 250 448 328 206 374 328 265 245 300 410
GC-300 655 480 240 85 410 360 300 468 400 254 484 400 325 303 362 535
GC-350 760 480 264 93 450 410 350 550 435 282 562 435 310 262 416 600
GC-450 907 580 320 125 570 510 450 620 555 337 662 555 470 420 589 810
(mm.)
MODEL M1 M2 M3 M4 M5 N1 N2 N3 N4 N5 O P
GC-180 156 148 215 184 148 153 184 176 108 120 163.61 215
GC-200 167 130 199 215 160 179 170 185 100 155 178.51 239
GC-250 206 195 300 245 265 223 200 240 115 158 224.67 300
GC-300 254 240 362 303 275 185 184 200 92 148 282.74 362
GC-350 282 270 416 317 310 214 248 264 112 224 316.80 416
GC-450 337 310 589 420 320 180 160 248 120 160 419.62 589
K
A B L
J
I
D
O
N
C
E F P Q
G
H R
(mm.)
MODEL A B C D E F G H I J K L M N O P Q R
GC-500 485 390 632 540 750 550 1300 1352 500 600 450 350 500 564 614 500 350 1087
GC-600 526 480 767 600 800 650 1450 1530 600 700 520 420 600 670 720 600 500 1256
GC-700 608 533 827 718 850 650 1500 1684 700 800 620 520 720 770 820 600 650 1250
GC-800 690 620 798 829 850 800 1650 1820 800 900 660 650 800 870 920 600 650 1415
GC-900 830 710 1006 918 850 910 1760 1948 900 1000 820 700 920 970 1020 600 700 1572
GC-1000 892 749 1122 979 850 950 1800 1999 1000 1100 820 720 1020 1070 1120 600 700 1622
GC-1200 1079 913 1050 1195 1334 1155 2498 2487 1220 1370 965 815 1200 1286 1346 689 975 1665
GC-1400 1246 1065 1573 1434 1556 1346 2902 3088 1423 1593 990 820 1447 1500 1570 799 1047 1846
SPECIFICATION
900 800 750 700 900 950 1000 12x32 hole 12 I.D. 900 1020 970 920 12x24 hole 20
1000 820 780 720 1000 1050 1100 12x36 hole 12 1000 1120 1070 1020 12x28 hole 20
1200 965 890 815 1200 1295 1370 14x36 hole 18 1200 1346 1286 1240 14x32 hole 20
1400 990 907 820 1423 1511 1593 14x36 hole 18 1400 1447 1500 1570 14x32 hole 20
Notes: 1.2. Direction of rotation is determined from drive side of blower.
On single inlet blowers, drive side is always considered as the side opposite blower inlet.
3. Direction of discharge is determined in accordance with diagrams. Angle of discharge is referred to the vertical axis of the blower and
designated from such standard reference axis. Angle of discharge may be any intermediate angle as required.
4. For blower inverted for ceilimg suspension, or side wall mounting, direction of rotation and discharge is determined when blower is resting
on floor.
Team Work
Gencon has professional and high experience teamwork
and modern factory. We are ready to serve customers
and strictly follow corporate policy, customer satisfaction
is our highest goal.
Office : 59/1 Moo 12, Soi Mitraphap, Bangna Trad KM. 6, Bangkaew, Bangplee, Samutprakarn 10540 Tel : 0-2312-0888 Fax : 0-2312-0889
Factory : 789 Moo 2 Bangpoo Industrial Estate, Soi 1, Sukhumvit Rd., T.Bangpoomai, A.Muang, Samutprakarn 10280 Tel : 0-2323-9212-3 Fax : 0-2323-9214
Website : http://www.gencon.co.th E-Mail : marketing@gencon.co.th