Professional Documents
Culture Documents
99
MENU
How to Make a Glow in The Dark Bouncy Ball with Proto Putty
Disposable Cup
Corn Starch
Mixing Stick
Small Cup of Water
Rubber Gloves
(Optional) Dye
Food Coloring
Color Pigment
Glitter
Get Creative
Steps:
1. Pour enough cornstarch in the cup to line the cup.
3. Add dye, glow, and any other additives. Mix until it has a nice smooth consistency
4. Add approximately 1 ML of water (less mater makes it take longer to harden and more water makes it harden faster)
5. Mix thoroughly
6. Apply a small amount of cornstarch to hand then put silicone into hand and start rolling. If it's too sticky it either needs more cornstarch/glow
powder or needs a bit more time to harden.
7. Aggressively roll between hands, squish it fairly flat as you roll it to get maximum smoothness, eventually roll it lightly & focus on making it
spherical. Then carefully drop it onto wax paper / aluminum foil.
8. (optional) Instead of dropping it onto the sheet you can keep rolling for 10-15 minutes until it completely solidifies to get bouncy balls as
spherical as possible without a flat spot.
Share
3 comments
Ryan Melanson November 25, 2019
Hi unrelated but I noticed you sell Zirconia diamonds for your “Pure Diamond” rings. I know this is a full time business for you, but $300 is a little
much to pay just because it looks pretty. I would suggest a different material that makes it look less cheap but still keeps the shine.
Leave a comment
Name Email
Message
POST COMMENT
BACK TO NEWS
MENU FOLLOW US
Home
All Products
Search
Blog
Facebook Group
Contact Us