Professional Documents
Culture Documents
This device is capable of delivering up to 800mA of output • Output current: up to 800mA (VIN = 2.5V, VOUT = 3.3V)
current (VIN = 2.5V, VOUT = 3.3V) and provides excellent • High efficiency: up to 98%
efficiency due to its adaptive current limit pulse frequency • 41µA quiescent current maximizes light load efficiency
modulation (PFM) control architecture.
• Fully protected for over-temperature and undervoltage
The ISL9120 is designed for standalone applications and
• Small 1.41mm x 1.41mm WLCSP
supports a 3.3V fixed output voltage or variable output
voltages with an external resistor divider. The forced bypass
power saving mode can be chosen if voltage regulation is not Applications
required. The device consumes less than 1µA of current over • Smartphones and tablets
the operating temperature range in forced bypass mode.
• Portable consumer and wearable devices
The ISL9120 requires only a single inductor and very few
external components. Power supply solution size is minimized Related Literature
by a 1.41mm x 1.41mm WLCSP.
UG023, “ISL9120IIx-EVZ Evaluation Board User Guide”
VIN = 100
1.8V TO 5.5V ISL9120IINZ VIN = 3.6V
95
VIN LX1
C1
L1
10PF
90
EFFICIENCY (%)
1PH
LX2
ENABLE VOUT VIN = 4V VIN = 3.4V
EN VOUT =3.3V 85
DIS ABLE VIN = 3V
C2 VIN = 2.5V
FORCE D BYPASS BYP FB 22PF or 47PF 80
BUCK-BOOST
PGND
GND
75
70
1 10 100 1000
OUTPUT CURRENT (mA)
FIGURE 1. TYPICAL FIXED OUTPUT APPLICATION FIGURE 2. EFFICIENCY: VOUT = 3.3V, TA = +25°C
May 28, 2015 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
FN8659.0 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
This datasheet has been downloaded from http://www.digchip.com at this page
ISL9120