Professional Documents
Culture Documents
Telescopic Crane
with telescoping monitoring system
Hardware
5
Controllers 1 qSCALE S6 IP66
Consoles 2 vSCALE D3
Sensors 3 gSENS LWG
4 gSENS LG
5 2x pSENS DAVS
Wind speed sensor, rotary encoder,
inclination sensor
Software
3 4 Load moment indication LMI application
Graphical console application
Datalogger
5
2
1
Features enu-driven, graphical set-up state pre-selection
M
Pre-selection of 4 telescoping ways
Graphical information screen for currently selected set-up state
Output of status information and service screens as a language-neutral table or graphic
Sensor calibration via console (password-protected service menu)
User limits (radius, angle, height, slew angle)
Virtual wall
Reduction of movement speed depending on length, angle, utilization
Release of crane movements
Visualization of status information from crane controller, Visualization of motor data (J1939)
Communication to crane control via CAN and I/O
Overview
Kudesnik
Altec
EU
lations
Regu-
USA W
Russia W
Load moment indication W W
Load Moment Indication
General cut-off
Digital Inputs W W
Digital Outputs W W
Angle sensing at boom bottom W W
Angle sensing at boom top
Load sensing in luffing cylinder W W
Customized fully graphical OM selection (guided menu) W W
Requirements
W W
Status information by symbols W W
Status information with additional text W W
Extended error messages (multi levels) W
Servicescreens (multi level with text) W W
Servicescreens (tables or graphics) W
Monitoring load on runner in main boom OM
Interpolation of rated loads by main boom angle in luffing jib OM
Superlift
Monitoring of inclination for ship mounting
WIKA Mobile Control Visualization of inclination by bubble level W W
Free fall function for hoist
GmbH & Co. KG
Load on main boom with jib mounted W
Hertzstr. 32-34
Communication to crane controller W W
features
Special