Professional Documents
Culture Documents
Variolink Esthetic DC
®
Application of Try-in of restoration Cleaning after try-in Isolation Application of Try-in of restoration Cleaning after try-in Isolation
Application of Try-in of restoration Cleaning after try-in Isolation
Try-in paste Try-in paste
Try-in paste
15 s
15-30
2 Total Etch 3 2 Total Etch 3
2 Total Etch 3 s 15-30
s
AIR!
AIR!
optional optional
optional
15 s AIR!
H2O AIR!
40 s 40 s
40 s 20 s
Adhese 20 s Adhese Adhese 20 s
6 7 4 Universal 6 7 4 Universal 6 7
4 Universal H2O
H2O AIR!
AIR!
AIR! H2O
AIR!
2s 2s 2s 2s 2s 2s 2s 2s
Bluephase 3
2s
4 Bluephase 3a 3b 3c 3d 4 Bluephase 3a 3b 3c 3d 4
Style Style Style
Secure the restoration until final polymerisation Secure the restoration until final polymerisation
Secure the restoration until final polymerisation
5 6 7 5 6 7
Liquid
5 6 10 s 7 Liquid 10 s* Liquid 10 s*
more information
www.cementation-navigation.com
®
IPS Empress CAD – Preparation Guidelines
Careful preparation is decisive for the durability and accuracy of fit of the restoration.
It is important to properly design the margin with a circular shoulder or chamfer preparation and rounded inner
aspects. Transitions with sharp angles and feather edge margins should be avoided. In order to achieve a stable
restoration, the minimum wall thicknesses have to be observed.
Veneer
≥ 0.6 ≥ 0.6
≥ 0.7 ≥ 0.7
≥ 0.7 ≥ 1.0
≥ 1.5 6°
Inlay
≥ 1.5
100°–120°
6°
≥ 2.0
Onlay ≥ 1.5
100°–120°
≥ 1.5 ≥ 1.5
1,0
≥ 2.0
2.0 2.0
Posterior crown 1.5
1.5 1.5
10–30°
≥ 1.0 ≥ 1.0
Dimensions in mm
Adhesive cementation
IPS Empress® CAD restorations must be inserted using the
adhesive cementation technique. We recommend
Variolink® Esthetic in combination with the dentin
bonding agent Adhese® Universal or Multilink® Automix
with Multilink® Primer A/B. Monobond Etch & Prime® and
Monobond Plus® are available for the conditioning.
Manufacturer:
Ivoclar Vivadent AG, 9494 Schaan/Liechtenstein
Date information prepared: 2017-03-22, Rev. 1
Rx ONLY
For dental use only! www.ivoclarvivadent.com 603171/EN
see instructions