300/250 WATT FC/FW SERIES
FEATURES
-aralle cpe ton
‘ith forced wed
satiny
Output vata
adjustable (0°
to 104
High power
density 54.3
Wi
Low output noise
Metal base plate
2:1 input voltage
range
High efficiency
typ. 87%
Remote sense
Remote oniatt
input Vée Output Power W Output vd
Power good
sighal tess= [E300 il
Constant 37 2= [Wl] 250 1: Bl]
frequency a EF
Synchronization 2. fH
‘Thermal
‘shutdown
Current monitor
lp
The FW.
power and is the highest ewe {2
Mou
) provides 300
led Power Module 0:
Power Systems. The FC/FH
inch
24 inches wide, 46 inches fc
high case. in addition to ATE “:
with forced see
parallel oper
featur full-feature
synchronization, power good
CHEW Sores 3.
applicati
waximum case temperature «na 6."
ficiency,
efficenay
speior performance, fu
igh reliably make the FC
relrted so
X
or electronic data processing a0Eticlency
3.3 V Output
5.0 V Output
12V,15VOuput 84%:
SetPoint Accuracy 21%
Load Regulation 10.05%
Line Reguation 20.01%
Output Temperature rit 20.01%/"C
(Output Ripple
33V,5V Out SOmVp-p, 40 mms
12VOutpat —100mVp-p, 80 mvs
45V Output — 100 mVp-p, 80 mvims
Overvoltage Shutdown 120%
(Curent Limit Inception 115%
‘Short Circuit Curent
TYPICAL INPUT
CHARACTERISTICS
Reflected Ripple Curent -20mAp-9
Fipple Rejection @ 120 Hz 60.48
OPTIONS
Heat sink availabe for extended operating
temperature (page 58)
PRODUCT ATTRIBUTES
Isolation
Voltage 500 Vee
Capacitance 2000 pF
Resistance >10MQ
Operating Case Temp. ~40° to 100°C
Storage Temperature ~40° to 120°C
Case Dimensions
4.60°L, 240° W, 0.50" H
Pins are solder plated brass.
Dimensions are in inches and (milters).
Compare to other modules in this
package size
This module provides:
* Lower input and output noise
+ Super case design for grounding and mounting heat sok
* High power density 543 Wit
For more specific technical information, alt 1-800-526-7819.
For product-specitc data sheet and applicationAechnical notes,
call 1-800-372-2447
‘ Remote On/Off Tech, Note AP91-036EPS
%