Professional Documents
Culture Documents
DATE: 2014-03-13
Action: CVMV29L-F-10
TV System: PAL+SECAM+NTSC
Approved Signatures:
Approved By
Reviewed By Issued By
Customer Project
Project Leader D.C.C.
Leader
` 1
1. Basic Function & Specifications --------------------------------------------------3
2.Maintenance&Safety -----------------------------------------------------------------4
3.Software Upgrade ---------------------------------------------------------------------4
4. mainboard Specifications -----------------------------------------------------------5-24
5. mainboard schematic diagram----------------------------------------------------25-32
6. mainboard service manual---------------------------------------------------------33-44
7.Power Board service manual-------------------------------------------------------45-61
8.PanelSpecifications-------- -----------------------------------------------------------62-
. Basic Specifications
` 2
Working Temp:0~40℃
Storage Temp:-20~60℃
Humidity(Working):10~90%
Humidity(Store):10~90%
CCFL Lifespan(50 Lum,Tube current < Rating):60000 hour(Il=4.5Ma 25℃)
MTBF:50000 hour (Panel Module NOT inculded)
Power requirement:Voltage 100~240 V 50 / 60 Hz
( Note: The above specifications are suitable for most of the TV models, and
for your reference only.)
` 3
2.5 Attention:
LVDSVDD – if the LCD is in 5V, it must be switched to the setting of 5V. And
if the LCD is in
3.3V, it must be switched to the setting of 3.3V. (Switch setting: CN6 -- 5V or
3.3V )
3. Instruments
3.1 Multimeter:
Max Input Current : over 1A / Max Input Voltage : 500Vdc
Measurement Range : 10Mvr~100Vdc / Accuracy : 0.03%
3.2 Oscillograph
Frequency Band : over 20M /Input Impedance : over 1M
Input Capacitance : below 30pF / Max Input Voltage : 250V
3.3 PC: XGA (1024X768@60Hz)
3.4 HD Singal Generator: 480P 576P 720P 1080i@50/60HZ
3.5 DVD Player: Audio/Video output, S-VIDEO output, HDMI output.
3.6 VGA cable, S-VIDEOcable, RCA cable, YpbPr cable and HDMI cable.
3.7 Chip test:18.5” or 24” LCD, power board, panel cable, INVERTER cable,
3.8 Control board, Receiver, Remote controller.
3.9 Color TV Pattern Generator: FLUK 54200.
3.10 Work equipment will need Anti static searing-iron, tweezer,wire
cutter,soldring tin, rosin,brush
4. Software Upgrade
The chip inside the LCD is designed with a FLASH ROM memory program: it
can be erased
and reprogrammed, it can be also updated via the USB port or VGA port. The
program is related to the chip fucntion ---Different functions of chips need to be
planted with different versions of prgrams.
Please ugrade the new software by the USB port the instruction steps
below:
-------Please copy the new software to the USB
-------Power ON the TV and press MENU to display the main menu ,then
press / to the
OPTION menu. And then select the software in the root of your USB memory ,
Press ENTER .then press to update and to cancel.
Remarks: When the first upgrading is finished, the action of turning on the tv
will be a little slow. So when you turn on the TV at the first time, you need to
press the "power" key on the remote control several times until you turn on the
tv. Turning on the TV at the first time is very important, you need to operate it
carefully to avoid the upgrading is not successful.
` 4
FORM-70-016-01
REV: V1.0
W
SPECIFICATION
IE
AV
MODEL : CVMV29L-F-10
AUTHOR :
R
CHECKED BY :
APPROVED BY :
LT
http:// WWW.CULTRAVIEW.COM
Shenzhen Cultraview Digital Technology CO., LTD
ITEM
W
4. PRESET MODE FOR USB .......................................................................................... 5
IE
6. SUBSTITUTABLE PRIMARY MATERIALS ............................................................. 8
2. GENERAL DESCRIPTION
television signals.
With chipset TSUMV29, USB slot can only used for updating software.
With chipset TSUMV59, USB slot can be used for updating software and play
W
multimedia.
¾ Supports USB 2.0 multimedia play, supports audio and video play; supports text
IE
¾ Analogue and digital HD port input signal largest supports1080P.
¾ 3-D motion adaptive video de-interlaces with edge-oriented adaptive algorithm for
enhancement.
¾ True color OSD, humanized operation menu, supports Channel List, channel edit
3. FEATURES
Type TFT-LCD/LED
PANEL Resolution Max. 1920X1080
Interface Single/ Double LVDS
Receiving range 49MHz – 863MHz
Input Impedance 75Ω
ATV Video System PAL ,SECAM ,NTSC
BG, DK, I, M/N
Sound System
W
NICAM/A2
Sync H: 30-75KHz V: 56-75Hz
PC Video Level 0.7Vp-p@75ohm
MODE Max 1920X1080@60Hz
IE
Color system PAL/NTSC/SECAM
AV Video Level 1Vp-p@75ohm
Audio Level 500mV rms
AV
Video Level Y:1Vp-p@75ohm, PbPr:0.7Vp-p@75ohm
YPbPr Audio Level 500mVrms
Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Video Standard TMDS
HDMI
Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
R
Video CVBS&RGB input, CVBS output
RBG: 0.7Vp-p@75ohm
SCART Video output/input
CVBS: 1Vp-p@75ohm
LT
W
Xvid,MPEG-2,MPEG-4,
C
H.264,
MP2, PCM
(Divx Need license)
(AC3 Need The Max Resolution And
MPEG-2,MPEG-4,H,264
.mp4 license) Frame
IE
(Divx Need license)
(DTS Need Rate:1080p@30fps
.ts/ .trp MPEG-2,H.264
license) Max Data Rate: 20 Mbps
.mpg MPEG-1,MPEG-2
MOVIE .mkv / MPEG-1/2/4,H.264,
AV
.mov (Divx Need license)
The Max
MP2
.dat MPEG-1 Resolution:352×288
(AC3 Need
Max Data Rate: 20 Mbps
license)
The Max
(DTS Need
R
.vob MPEG-2 Resolution:720×576
license)
Max Data Rate: 20 Mbps
The Max Resolution And
LT
.rm/ Frame
RV8,RV9, RV10 COOK
.rmvb Rate:1080p@30fps
Max Data Rate: 10 Mbps
Max Resolution:
.jpg Progressive JPEG
1024×768
U
Max Resolution:
.jpeg Baseline JPEG
15360×8640
C
Max Resolution:
9600×6400
PHOTO .bmg ----
Pixel Depth:
1/4/8/16/24/32 bpp
Max Resolution:
Non-Interlaced
9600×6400
.png
Max Resolution:
Interlaced
1200×800
MUSIC .mp3 --- MP3 Sample Rate:
32K~48KHz
.wma --- WMA Bit Rate: 32K~320Kbps
Channel: Mono/Stereo
Sample Rate: 8K~48KHz
.m4a /
--- AAC Bit Rate: 24K~384Kbps
.aac
Channel: Mono/Stereo
Note:
¾ This product includes the following optional patented technologies : Dolby, DTS,
W
DIVX, SRS , etc. If you need to use these patented, please provide the patent license to
us, so that the product can meet your requirements . (此产品包括如下可选的专利技术:
DOLBY、DTS、DIVX、SRS 等,如您需要开通这些功能,请提前提供相关专利许可给到
我司,以便产品能满足您的要求。)
IE
2)Support hard disk,the maximum storage capacity is 400G
3)Folder in support of the greatest depth is 30
5)Only support single audio channel audio format and dual-audio channel audio format
Operation Instructions
AV
Hi Speed FS, FAT32, FAT16, NTFS(NTFS compressed file is not supported
R
LT
U
C
5. ELECTRICAL CHARACTERISTICS
W
Power Up Timing
POWER
IE
+5Vstb t1
HWRESET
AV
PWR_ON/OFF t2
+5V
t3
R
+12V
TIME
LT
General materials
Including SMT capacitors, SMT resistors, diodes, transistors, MOSFET, connectors,
common inductance, electrolytic capacitor, PCB etc., and having no obvious
changes in appearance or color. Our company has two or three alternative suppliers
with these materials, maybe we will alternative use these materials for follow-up
mass production due to delivery time, stock or other reasons. We no longer notice
your company the alternative materials used. If necessary, you can apply for using
related materials (mention as above) in samples stage.
W
(Note: The alternative materials which have been accepted by our materials
confirmation department and PP will enter our system.)
Key materials
IE
Including crystals, LDO, SAW Filter, DC-DC, Amplifier, Audio &Video switch, and
having obvious changes in appearance and color of general materials, Our company
has two or three alternative suppliers with these materials (See following table for
detail), maybe we will alternative use these materials for follow-up mass production
AV
due to delivery time, stock or other reasons. We will notice your company the
alternative materials used in written form. If necessary, you can apply for using
related materials (mention as above) in samples stage.
Name Main Type Brand Backup Type Brand
LDO BL1117 BL BM1117 BM
R
Audio
NS4263 NSIWAY -- --
Amplifier
24MHz +-20PPM 24MHz +-20PPM LS
Crystal ZG
20PF HC 49US 20PF HC 49US TJ
U
Core materials
Including DDR, FLASH, TUNER, and the materials related to change software. Our
C
company has two or three alternative suppliers with these materials (See following
table for detail), maybe we will alternative use these materials for follow-up mass
production due to delivery time, stock or other reasons. We will notice your company
in written form and we must get your company confirm whether accept before using
the alternative materials.
W
-- --
IE
AV
R
LT
U
C
7. PICTURES
W
IE
AV
FRFRONT VIEW
R
CVBS1 R1 L1 PC RF
LT
SIDE VIEW
U
C
Y Pb Pr
YPBPR
Board Type 2 :
TOP VIEW
W
IE
FRONT VIEW
AV
SIDE VIEW
R
LT
CVBS2 R2 L2
AV2 IN
U
C
Board Type 3 :
TOP VIEW
Expand Port
AV
W
IE
AV
FRONT VIEW
R
SIDE VIEW
LT
U
Y PB PR CVBS2 R2 L2
YPBPR AV2 IN
C
8. INTERFACE DEFINITION
W
5 K4 LEFT key
6 K3 SOURCE key
7 K2 UP key
8 K1 DOWEN key
IE
9 K0 MENU key
10 GND Ground
11 IR Remote receive
12 LED_G
AV
Green indicator
13 LED_R Red indicator
14 LED_5V +5V power
NO Definition Description
1 +3.3V +3.3V panel voltage
2 VCC_PANEL Panel Power In
3 +5V +5V panel voltage
U
5 GND Ground
6 GND Ground
7 RXO0- LVDS ODD 0- Signal
8 RXO0+ LVDS ODD 0+ Signal
9 RXO1- LVDS ODD 1- Signal
10 RXO1+ LVDS ODD 1+ Signal
11 RXO2- LVDS ODD 2- Signal
12 RXO2+ LVDS ODD 2+ Signal
13 GND Ground
14 GND Ground
W
15 RXOC- LVDS ODD Clock- Signal
16 RXOC+ LVDS ODD Clock + Signal
17 RXO3- LVDS ODD 3- Signal
18 RXO3+ LVDS ODD 3+ Signal
IE
19 RXE0- LVDS EVEN 0- Signal
20 RXE0+ LVDS EVEN 0+ Signal
21 RXE1- LVDS EVEN 1- Signal
22 RXE1+ LVDS EVEN 1+ Signal
AV
23 RXE2- LVDS EVEN 2- Signal
24 RXE2+ LVDS EVEN 2+ Signal
25 GND Ground
26 GND Ground
27 RXEC- LVDS EVEN Clock- Signal
R
28 RXEC+ LVDS EVEN Clock + Signal
29 RXE3- LVDS EVEN 3- Signal
30 RXE3+ LVDS EVEN 3+ Signal
LT
J5 : SPEAKER CONNECTOR(4PIN/2.54)
NO. SYMBOL DESCRIPTION
1 ROUT+ Audio Right channel Output+
2 ROUT- Audio Right channel Output-
U
1 GND Ground
2 GND Ground
3 ADJ Brightness Adjustment for Panel(Volts DC Output)
4 BL_ON Back-Light ON/OFF Control for Panel
5 +12V INVERTER +12V DC Power Supply
6 +12V INVERTER +12V DC Power Supply
W
2 SCL External I2C SCL
3 SDA External I2C SDA
4 GND Ground
IE
J10: EXTERNAL USB CONNECTOR(4PIN/2.0)
NO. SYMBOL DESCRIPTION
1 GND Ground
2 DP USB Data+
AV
3 DM USB Data-
4 +5V +5V Power Supply for USB
R
LT
U
C
9. CONFIGURATION
Board Type 1:
W
IE
AV
R
LT
Board Type 2 :
W
IE
AV
R
LT
W
IE
AV
R
LT
U
W
¾ The hole of each port does not be opened too small, especially the HDMI
port hole, avoid the whole set morphing to cause the extrusion of port when
installing.
¾ The hole of RGB socket is recommended the situation of not using the
IE
screw stationary on the RGB socket to fix on the structure board.
¾ The connected wire which between the other boards and this board can't be
leaded too long, or affect performance and image quality.
¾ The whole set inner wires matching reasonable, each connected wire try to
AV
not directly cross the PCB board, especially cross over from the main IC,
avoid affect the whole set EMC performance.
¾ n order to obtain better EMC effect of the whole set, we suggest the LVDS
twisted pair wire between the main board and panel must be tied up well
and try to use shielding wire. If it’s possible, try to put on the magnetic belt
R
ring on the wire which near the board terminal.
¾ The HDMI and HDCP on the main board are all passed the related
certifications, but we just provide testing certification of the inner usage
LT
standard. If you need to use legal HDMI and HDCP, please apply related
association as formal member by yourself.
¾ There is ROHS identification on the board and package, the board match
ROHS standard.
U
C
All rights reserve, if the specification has fluctuation and take real object as quasi 19
ShenZhen Cultraview Digital Technology CO.,LTD
11. EXCURSUS
W
IE
AV
R
LT
U
C
All rights reserve, if the specification has fluctuation and take real object as quasi 20
5 4 3 2 1
POWER
IN 12VIN
TP5
12VU 12VU 5VU 5VA 3.3VU 3.3VA
J14 DC3AIN
GND 3 1POWER
1 1
Q9 3407 TP6 Q8 3407
2
C89 CA5 2 3 1 2 3
GND 470uF 5VA
D 100nF R89 D
2
47K C72
1
100nF
TP4 R93
3.3VU 1.2VU 1.32VU R33 4.7K
U7 BL1117-ADJ 10K
1
3 VIN VOUT 2
3
4
GND
2
100nF 10uF 10uF 100nF L:Standby
3 VIN VOUT 2
Vout1 4
SY8113改用MP1495
ADJ
C90 C43 C8
R64 C32
10uF 100nF 200R_1% 10uF
R1
1
C C
100nF
R63 12VU
R2 200R_1%
Vo=1.25*(1+R2/R1)
+5V_SB
U5
Vout=0.8(1+R1/R2)
2 IN
BST 5
C57 C61 R53 10R C33 TP3
R52 5VU
3.3VU 5VU 12VU TSUMV29,39LU,R1=R2=200R,for 100nF 10UF 6 EN
100nF 5VU
100K 3 L8 6.8uH/3.1A
DDR1供电
1
SW
1
62K_1%
J6 Q1 3407 R1 CA3
1 2 2 3 R55 1 8 C64 C63 C62
GND
+12V VCC-Panel 100K AAM FB R51 33K/1% 100uF/16V
2
3 C40 R43 10uF-X5R10uF-X5R100nF
+5V R25 C7 C4 MP1495DJ 11.5K_1%
R2
4
2 47K 100nF
1
Q2
PWR-ON/OFF 1 MMBT3904
B R30 4.7K B
L:ON
2
H:OFF R29
2.2k TP2
C46 100nF 3.3VU
3.3VU
1.5K 改为2.2K 12VU U4
1
1 L12 6.8uH/2A
BS LX 6
5 SY8120B--2A R32
IN SY8113----3A
R31 100K 4 FB 3
GND
EN
12VIN 47K_1%
Inverter Interface
1
2
PH-6A CA1 C35 C20 C44 C39
6 C30
+12V1 100uF/16V 100nF R35 100nF 10uF-X5R 10uF-X5R
5
2
R48 R49
R58 47K/NC 1K A1 A2 A3
4.7K AHOLE138 AHOLE138 AHOLE138
100nF/NC
2
5VA
C22
BRI_ADJ-PWM0 R39 4.7K 1 Q3 Title
3 BRI_ADJ-PWM0 MMBT3904 100nF
CVMV29L-F-10
2
AVDD_DDR_2.5V/1.8V
MAIN IC Chip
2
BRI_ADJ-PWM0
HDMI1-CLKP4
HDMI1-CLKN4
HDMI_HP1 4
4
HDMI-CEC 4
4
4
4
HDMI1-RX2P
HDMI1-RX1P
HDMI1-RX0P
HDMI1-RX2N
HDMI1-RX1N
HDMI1-RX0N
IC Power
MUTE_AMP
4
7
HDMI1-SDA
HDMI1-SCL
4
4
USB1_D+
USB1_D-
RESET
UART-TX UART-TX
R77 UART-RX UART-RX
5
5
3.3VU Close to IC
R73 BRI_ADJ-PWM0
Q7
HDMI1-RX2N
HDMI1-RX1N
HDMI1-RX0N
HDMI1-CLKN
HDMI1-RX2P
HDMI1-RX1P
HDMI1-RX0P
HDMI1-CLKP
GND-EFUSE
System-RST
MUTE_AMP
KEY0-SAR0
HDMI1-SDA
HDMI1-SCL
3 SGM810 R85 1K System-RST AVDD_DDR_2.5V/1.8V
HDMI_HP1
HDMI-CEC
2
USB1_DM
USB1_DP
IRIN
1.8VA 2.5VA
L101
R50 0R/NC
C34
1
R84
V29L101,C104和C105建议NC
100nF
100K
C36 C53
掉,V39,V59要上件
D C104 C105 D
100nF/NC 1u/NC
68R
68R
TSUMV29LU没有USB。 3.3VU 2.5VA
L106
ADC2P5
105
104
103
102
101
100
106
107
108
109
晶振负载电容确定 C55
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
V29,V39L103=FB,L105=NC,
V29,V39 L106=FB,L107=NC;
U6
XTALI 100nF
V59,L103=NC,L105=FB,
USB0_DM
E-Pad5
E-Pad4
E-Pad3
E-Pad2
E-Pad1
PWM1/GPIO25
PWM0/GPIO26
E-Pad6
E-Pad7
E-Pad8
E-Pad9
RX2P
RX2N
DDCD_CK
RX1P
RX1N
DDCD_DA
RX0P
HWRESET
SAR1
SAR0
RX0N
RXCKP
RXCKN
HOTPLUGD
GND_EFUSE
CEC
IRIN
AVDD_DDR
DDCA_DA
DDCA_CK
TESTPIN
USB0_DP
C60 33pF
V59 L106=NC,L107=FB
110 NC0
1
TSUMV39LU
RGB2-HDTV_BIN C113 47nF BIN2 11 65 LVRXO1+ 100nF 100nF 100nF 100nF 100nF C58
5 RGB2-HDTV_BIN BIN1P LVB1P
RGB2-HDTV_SOGIN
C92 1nF SOGIN2 12 64 AVDD_MOD
3.3VU 5 RGB2-HDTV_SOGIN SOGIN1 AVDD_MOD1
RGB2-HDTV_GIN C93 47nF GIN2P 13 63 LVRXO2- 100nF
5 RGB2-HDTV_GIN GIN1P LVB2M
R123 68R C94 47nF GIN2M 14 62 LVRXO2+
RGB2-HDTV_RIN C95 47nF RIN2 GIN1M LVB2P LVRXOC-
15 61
FLASH
5 RGB2-HDTV_RIN
AVDD33_OR_HSYNC1 16
17
RIN1P
MST6M182XX/TSUMV39LU
AVDD_331
CVBS2
LVBCKM
LVBCKP
LVB3M
60
59
LVRXOC+
LVRXO3-
3.3VU AU33
AV2-CVBS2P C96 47nF CVBS1 18 58 LVRXO3+
R28
4.7K
3.3VU 5 AV2-CVBS2P
5 AV1-CVBS1P
AV1-CVBS1P C97
R124 68R C98
47nF CVBS0
47nF VCOM0
19
20
CVBS1
CVBS0
VCOM
TSUMV29LU LVB3P
LVA0M
LVA0P
57
56
LVRXE0-
LVRXE0+
Normal Power 1.2V
VDD33
U3 GD25Q16B LVRXE1-
21 55 L102
8 VDD CE# 1 SPI_CS0N R65 5
AU33
SC-AULin0 SC-AULin0 C110 1u AUL0
22
23
CVBSOUT
AVDD_AU33
AUL0
TSUMV29LE LVA1M
LVA1P
LVA2M
54
53
LVRXE1+
LVRXE2-
1.2VU VDDC
L19 120R/FB
C99
AVDD_DMPLL
5 SC-AURin0 AUR0 LVA2P
VDDIO_CMD
7 2 SPI_Flash-SDO AUVAG 25 51 AVDD_MOD AVDD33_OR_HSYNC1
AVDD_REF
HOLD# SO AUVAG AVDD_MOD0
AVDD_PLL
C C
AUOUTR0
AUOUTR1
AUOUTL0
AUOUTL1
LVACKM
LVACKP
SPI_Flash-SCK 6 FLASH_WP0N C78 C80 C67 C66 C16 C108 C109
GPIO55
GPIO56
GPIO57
RFAGC
3
LVA3M
LVA3P
CLK WP#
XOUT
AUR4
AUR5
VDD0
AUL4
AUL5
VIFM
VIFP
XIN
SPI_Flash-SDI 5 4 100nF 10uF 1u 100nF 100nF 100nF 100nF
DI VSS
TSUMV39LU
TSUMV29,39LU L102=FB,MST6M182XX
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
C48 Close to IC L16
100nF with width trace L102=NC,主要是做SCART 信号的FS输入
120R/FB
CHIP_CONFIG
LVRXO0- RXO0-
C81 AUR4
C73 AUR5
C83 AUL4
C76 AUL5
LVRXO0+ RXO0+
主IC选用TSUMV39LU时,具有MM功能,默认使 LVRXO1- RXO1-
LVRXO1+ RXO1+
1MByte的Flash,如果有需要,可以使用2MByte; LVRXO2- RXO2-
如果不使用MM功能,则Flash默认为512K。
1u
1u
1u
1u
LVRXO2+ RXO2+
LVRXOC- RXOC-
主IC选用TSUMV29LU时,不具有MM功能,默认 LVRXOC+ RXOC+
{IPAD_PWM1, PAD_PWM0}
LVRXO3- RXO3- B51_NO_EJ
TUNER_SDA
使用512KByte。 4'h00
TUNER_SCL
VGA-AURin2 VGA-AURin2
VGA-AULin2
LVRXEC+
AV1-AURin5 AV1-AURin5
LVRXE3+
AV1-AULin5
LVRXEC-
LVRXE3-
LVRXO3+ RXO3+
VIFM
VIFP
XTALO
LVRXE0- RXE0-
XTALI
AMP_LIN AMP_RIN
AGC
AMP_LIN
LVRXE0+ RXE0+ MUTE_AMP BRI_ADJ-PWM0
LED
R62 4.7K R67 4.7K
LVRXE1- RXE1-
LVRXE1+ RXE1+
DEBUG PORT
AV1-AULin5
5
5
5
AVDD25_DEMOD5
6
VDDC6
VGA-AULin2
VIFM
AVDD_DMPLL
AVDD_PLL
VIFP
LVRXE2- RXE2-
AVDD_DDR_2.5V/1.8V
7
7
AMP_RIN
LVRXE2+ RXE2+
5VU
LVRXEC- RXEC-
LVRXEC+ RXEC+
LVRXE3- RXE3-
LVRXE3+ RXE3+
R81 R78
4.7K/NC4.7K/NC
UART-RX
UART-TX UART-RX 5 去掉排阻 HEAD 2x15_LVDS
B UART-TX 5 RXE3+ RXE3- B
30 RXE3+ RXE3- 29
C28 4.7pF RXEC+ 28 27 RXEC- C21 4.7pF
RXEC+ RXEC-
26 GND6 GND5 25
RXE2+ 24 23 RXE2-
RXE1+ RXE2+ RXE2- RXE1-
22 RXE1+ RXE1- 21
RXE0+ 20 19 RXE0-
LED IR KEYBOARD C23 4.7pF
RXO3+
RXOC+
18
16
RXE0+ RXE0-
RXO3+ RXO3-
RXOC+RXOC-
17
15
RXO3-
RXOC- C24 4.7pF
14 GND4 GND3 13
RXO2+ 12 11 RXO2-
PH-14A 3.3VU RXO1+ RXO2+ RXO2- RXO1-
10 RXO1+ RXO1- 9
14 5V_LED RXO0+ 8 7 RXO0-
+5V LED_R 2.51V K0 R16 20K RXO0+ RXO0-
LED_R 13 6 GND2 GND1 5
12 LED_G 4 3
LED_G REMOTE R15 68R IRIN GND VCC2
IR 11 2 VCC1 VCC 1
10 0.417V K1 R17 820R
GND1 MENU K0 R80 J3 VCC-Panel
MENU 9
8 DOWN/CH- K1 4.7K
CH- UP/CH+ K2 0.873V K2 R18 1.5K
CH+ 7
6 INPUT K3
INPUT LEFT/V- K4
VOL- 5
Tuner Connector
4 RIGHT/V+ K5 1.286V K3 R19 3K KEY0-SAR0 C15
VOL+ POWER K6
POWER 3
2 EXIT K7 100nF
Reserved 1.65V K4 R20 4.7K
GND 1
C18
J1 2.1V K5 R21 8.2K +3V3_TUNER
100nF
LED_R
3
Title
3K
CVMV29L-F-10
Size Document Number Rev
Custom 1.0
03.TSUMV39LU
Date: Monday, March 25, 2013 Sheet 3 of 7
5 4 3 2 1
5 4 3 2 1
J12
21 1 HDMI1-RX2+ HDMI1-RX2P
21 DATA2+ HDMI1-RX2P 3
DATA2_SHIELD 2
3 HDMI1-RX2- HDMI1-RX2N
DATA2- HDMI1-RX2N 3
D 4 HDMI1-RX1+ HDMI1-RX1P USB_5V D
DATA1+ HDMI1-RX1P 3
DATA1_SHIELD 5
6 HDMI1-RX1- HDMI1-RX1N J13
DAT1A- HDMI1-RX1N 3 +5V
22 22 DATA0+ 7 HDMI1-RX0+ HDMI1-RX0P
HDMI1-RX0P 3 1 1 6 6 GND
8 USB1_D- DM 2
DATA0_SHIELD 3 USB1_D- 2
9 HDMI1-RX0- HDMI1-RX0N USB1_D+ DP 3
DATA0- HDMI1-RX0N 3 3 USB1_D+ 3
10 HDMI1-RXC+ HDMI1-CLKP GND 4 5 GND
CLK+ HDMI1-CLKP 3 4 7
11 PH-4A_USB/NC
CLK_SHIELD HDMI1-RXC- HDMI1-CLKN USB-H
CLK- 12 HDMI1-CLKN 3 4 +5V
13 CEC R106 220R/NC HDMI-CEC 3 DM
CEC HDMI-CEC 3
23 23 NC 14 2 DP
SCL 15 1 GND
16 HDMI1/5V
SDA J10
CEC_GND 17
+5V POWER 18
20 20 HOT PLUG 19
R111
C HDMI 1K C
R108 R135 R127
10K 10K 10K
HDMI1-HPD
C79
C9
100nF
B 10uF B
A Title A
CVMV29L-F-10
Size Document Number Rev
Custom 1.0
04.HDMI&USB
Date: Monday, March 25, 2013 Sheet 4 of 7
5 4 3 2 1
5 4 3 2 1
CON6
17
GND
VGA
10 GND
SCL 15 5 GND
9 NC
V 14 4 NC
8 GND
13 3 B VGA-B
H B
7 VGA-B R112 33R RGB0_Pb+
GND RGB0_Pb+ 3
12 2 G VGA-G VGA-G R114 33R RGB0_Y+
SDA G RGB0_Y+ 3
6 R113 33R RGB0_Y-SOG
GND RGB0_Y-SOG 3
11 1 R VGA-R VGA-R R115 33R RGB0_Pr+
NC R RGB0_Pr+ 3
GND
R131 R132 R128
16
D D
CON2
GND 1
Audio_R 3 PC-R R98 8.2K VGA-AURin2 VGA-AURin2 3
5
4
2 PC-L R105 8.2K VGA-AULin2 VGA-AULin2 3
Audio_L
PHONOJACK
R94 R99
10K 10K
C C
CON5
AV3-8r4-5tHHB
V
2 CVBS SC1_CVBS_IN
1 GND
L
4 L+ SC1_AU_RIN SC1_CVBS_IN R119 33R AV2-CVBS2P AV2-CVBS2P 3
R126
3 GND
R
6 R+ SC1_AU_LIN
5 GND
75R
CON4
AV6-8R4-13A/NC R102
GND 10K
1 1 Y SC1_CVBS_IN
V 2 2 GND
3 3 AV Y2_IN
4 4 GND
L 5 5 PB SC1_AU_RIN
6 6 GND SC1_AU_RIN R101 8.2K SC-AURin0
7 7 L PB2_IN
SC-AURin0 3
R 8 8 GND
9 9 PR SC1_AU_LIN R100
10 10 GND 10K
11 11 R PR2_IN
12 12
B B
CON1
AV3-8r4-5tYPBPR
V AV1-V Y2_IN R117 33R RGB2-HDTV_GIN
RGB2-HDTV_GIN 3
2 CVBS R97 0R/NC Y2_IN
1 GND R104 0R R116 33R RGB2-HDTV_SOGIN
RGB2-HDTV_SOGIN 3
L AV1-R PB2_IN R134 33R RGB2-HDTV_BIN
RGB2-HDTV_BIN 3
4 L+ R83 0R/NC PB2_IN
3 GND R79 0R
R AV1-L PR2_IN R118 33R RGB2-HDTV_RIN
RGB2-HDTV_RIN 3
6 R+ R37 0R/NC PR2_IN
5 GND R46 0R
These components close to V59
R125
R71
R61
75R
75R
HEAD 2x2
R7 3.02.17.07500 排针 双排针 DIP 2*2 2.0mm 塑宽:7.2mm 塑高:4.85mm 90度 母座 LK-HEPHF20022XX0-B000 LK ROHS
10K
Title
R88
10K CVMV29L-F-10
Size Document Number Rev
Custom 1.0
05.VGA&YPbPr&AV
Date: Monday, March 25, 2013 Sheet 5 of 7
5 4 3 2 1
5 4 3 2 1
5VA
J9
13
12
11
10
D 1 +5V
D
TUNER_SCL R68 68R/NC 2
TUNER_SDA R60 68R/NC SCL
3
GND4
GND3
GND2
GND1
TP7 SDA
4 GND
3.3VA +3V3_TUNER
+3V3_TUNER
PH-4A_IIC/NC
1
L15 220nH
VCC_3.3VA U9
CDT-3NP5I2-10/NC
IF_OUTN
IF_OUTP
C84
GND
AGC
SDA
NC2
NC1
SCL
100nF
普通高频头 直头 3.02.06.14500 高频头 DIP CDT-3NP5I1-10 差分输出 ROHS
普通高频头 螺纹头 3.02.06.14400 高频头 DIP CDT-3NP5F5-10 螺纹头 差分输出 ROHS
9
8
7
6
5
4
3
2
1
TU_SDA
TU_SCL
TUAGC
IFN
IFP
R72
510R
+3V3_TUNER
VDD3V_RFA
+3V3_TUNER
L18
C115 VDD3V_RFA L25 5.1R VDD33
C112 4.7pF
10nF VDD3V_RFB L14 0R
8.2nH L23
B B
SI Tuner L20
22nH
150nH R57
4.7K
R8
4.7K
1
L21
150nH C119 CA4 TUNER_SDA
TUNER_SDA 3
VDD33
C116 10uF 100uF/16V TUNER_SCL
TUNER_SCL 3
2
C111
GND GND 1nF
24
23
22
21
20
19
U8 100nF
4
2
25
rf_hp
avdd3
tf1p
tf1n
tf2p
tf2n
C120 68pF gnd C100 100nF
4
2
J11
3
5
xtal_o
10nF
xtal_i
dvdd
dvss
2
ifn
R70
120pF C117 1u 100nF NC
7
8
9
10
11
12
TU_SDA
C118 150pF
A Y1 IFP R66 220R IF_OUT2 A
16MHZ
1 2
NTSC用3.02.16.20970 RF JACK DIP 卧式 母座 美规 屏蔽一体 分盖 外铁内铜 LHD ROHS Title
C70 C69
CVMV29L-F-10
3
13
1 ROUT+ 1 ROUT+
4
U1
AMP_LIN AMP-LIN C37 100nF R42 33K 6 5 L7 1000R/FB L_ C12 10uF EAR_L J5 J7
VDD1
VDD2
3 AMP_LIN INNA VONA C10 C27 C38 C51
NC1 8
C11 1u 10 3.3nF 3.3nF 3.3nF 3.3nF
VREF
3 L10 1000R/FB L+
AMP_RIN AMP-RIN C1 100nF R1 33K 11 VOPA
3 AMP_RIN INNB
12 L2 1000R/FB R_ C3 10uF HP CTRL0
5VU VONB
MUTE 1 SD
NC2 9
GND1
GND2
GND3
C C
R4 16 14 L1 1000R/FB R+
100K HP-IN VOPB
NS4263
15
HP CTRL R6 100K
5VU SD HP-IN 工作模式
初始化低或一个下降沿 低 一、AB类,桥式输出
R54
4.7K 连续两个下降沿,
电平宽度在1us到12us之间 低 二、D类,桥式输出
MUTE CON3
B R45 4.7K 低 高 三、AB类,单端输出 B
GND 1
3
—System Chart
—Power Units Problem Solving
—Display Units Problem Solving
—Audio Units Problem Solving
—Functional Units Problem Solving
g
CV29L-F-10 System Block
USB
HDMI SPI
2M/4M Flash
VGA(RGB) RGB0
YPBPR
AV1
LVDS
AV2 LCD
TSUMV59XU
PC_AUDIO TSUMV39LU
TSUMV29LU
AV1_AUDIO
AV2_AUDIO MAIN_R/L
NS4263
Earphone
RF Spare Voltage
R620D Moudle
Figure.1 Power Units Problem Solving
In stand-by condition,
Check Test point TP5 have
12V?
N Y
Normal boot
Check external Check U5/U7/U4
power power supply net
N Y
OK
(Q8、Q9) Burnout、 or load
short-circuit .
Check power chip LDO (U2)
work?
Figure.2 Display Unit Flickering or
Black screen
(black screen) (Back light on)
Y N
Y N
Y RE-Upgrade
software
Y N
N Y
Inverter broke or
Maintenance power Check power supply circuit
bad wire connection
No sound Figure 4 Audio Unit (no
Figure.4
sound)
If Any audio signal input or
amplifier power supply normal
N Y
If any signal
output of J5/J7
Y N
U1(NS4263)6/11
Pin have signal input
Y N
N Y
Check Check
Maintenance U1 & U6
External audio Reset external Check amplifier Maintenance U6 Connect part
equipment: Speaker power supply circuit
network
t k
Amplifier power
supply circuit
Figure.5 Function Unit
TV no searching (ATV broke down)
/no image
Check External RF
signal input
N Y
Y
N
Check Tuner No. 9,10 pin of U9
Have I2C data
Y N
Check
Check video Repair Check pull-up power
Check Check
BPF circuit and Change its voltage of I2C supply
external connect
U6(TSUMV29LU) Tuner outer network is Ok circuit of
RF circuit
connectt network
t k circuit L15
equipment
i
Figure 6 Function Unit
Figure.6
TV no sound only picture (ATV with the image but
no sound)
N Y
PC Function
Check VGA
Image not Color circuit Image
cast No signal
In the middle connection shakes
OSD settings,
Carry
y out Check VGA Or input mode Check VS.HS
auto-adjust Reset the Check VS.HS
input circuit not correct, Circuit
operation system settings Circuit
Reset it
Figure.8 Function Unit
(VGA)
RGB
VGA
Miss color, All no signal
color cast
U6(TSUMV29LU)R.G.B
Input signal is normal
VGA socket
contact is ok
Y N
U6(TSUMV29LU)
HDMI and relevant Check If the sound
network is ok in PC
Y N
Y N
YPBPR
YPBPR
No signal
Color cast
Y/PB/PR Check U6
input signal external circuit
network and Crystal circuit
PRODUCT SPECIFICATION
Doc. Number:
□ Tentative Specification
■ Preliminary Specification
□ Approval Specification
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
CONTENTS
1. GENERAL DESCRIPTION .........................................................................................................4
1.1 OVERVIEW ................................................................................................................................ 4
1.2 GENERAL SPECIFICATI0NS ................................................................................................... 4
2. MECHANICAL SPECIFICATIONS ............................................................................................. 4
2.1 CONNECTOR TYPE .................................................................................................................. 4
3. ABSOLUTE MAXIMUM RATINGS ............................................................................................. 5
3.1 ABSOLUTE RATINGS OF ENVIRONMENT .......................................................................... 5
3.2 ELECTRICAL ABSOLUTE RATINGS...................................................................................... 5
3.2.1 TFT LCD MODULE ............................................................................................................5
4. ELECTRICAL SPECIFICATIONS............................................................................................... 6
4.1 FUNCTION BLOCK DIAGRAM............................................................................................... 6
4.2. INTERFACE CONNECTIONS ................................................................................................. 6
4.3 ELECTRICAL CHARACTERISTICS........................................................................................ 8
4.3.1 LCD ELETRONICS SPECIFICATION...............................................................................8
4.3.2 LED CONVERTER SPECIFICATION..............................................................................10
4.3.3 BACKLIGHT UNIT...........................................................................................................12
4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS ............................................................. 13
4.4.1 LVDS DC SPECIFICATIONS ...........................................................................................13
4.4.2 LVDS DATA FORMAT ......................................................................................................13
4.4.3 COLOR DATA INPUT ASSIGNMENT ............................................................................14
4.5 DISPLAY TIMING SPECIFICATIONS ................................................................................... 15
4.6 POWER ON/OFF SEQUENCE ................................................................................................ 16
5. OPTICAL CHARACTERISTICS ............................................................................................... 17
5.1 TEST CONDITIONS................................................................................................................. 17
5.2 OPTICAL SPECIFICATIONS .................................................................................................. 17
6. RELIABILITY TEST ITEM ........................................................................................................ 20
7. PACKING.................................................................................................................................. 22
7.1 MODULE LABEL .................................................................................................................... 22
7.2 CARTON ................................................................................................................................... 23
7.3 PALLET..................................................................................................................................... 24
8. PRECAUTIONS ........................................................................................................................ 25
8.1 HANDLING PRECAUTIONS.................................................................................................. 25
8.2 STORAGE PRECAUTIONS .................................................................................................... 25
8.3 OPERATION PRECAUTIONS................................................................................................. 25
Appendix. EDID DATA STRUCTURE........................................................................................... 26
Appendix. OUTLINE DRAWING .................................................................................................. 29
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N156BGE-L21 is a 15.6” (15.547” diagonal) TFT Liquid Crystal Display module with LED Backlight
unit and 40 pins LVDS interface. This module supports 1366 x 768 HD mode and can display
262,144 colors. The optimum viewing angle is at 6 o’clock direction.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 15.547 diagonal
Driver Element a-si TFT active matrix - -
Pixel Number 1366 x R.G.B. x 768 pixel -
Pixel Pitch 0.252 (H) x 0.252 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 262,144 color -
Transmissive Mode Normally white - -
Surface Treatment Hard coating (3H), Glare - -
Luminance, White 220 Cd/m2
Power Consumption Total 5.184 W (Max.) @ cell 0.9 W (Max.), BL 4.284W (Max.) (1)
Note (1) The specified power consumption (with converter efficiency) is under the conditions at VCCS =
3.3 V, fv = 60 Hz, LED_VCCS = Typ, fPWM = 200 Hz, Duty=100% and Ta = 25 ± 2 ºC, whereas mosaic
pattern is displayed.
2. MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 358.8 359.3 359.8 mm
Module Size Vertical (V) 209 209.5 210 mm (1)
Thickness (T) - 5.2 5.5 mm
Horizontal 349.28 349.58 349.88 mm
Bezel Area
Vertical 197.99 198.29 198.59 mm
Horizontal - 344.232 - mm
Active Area
Vertical - 193.536 - mm
Weight - 430 445 g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
2.1 CONNECTOR TYPE
Pin40 Pin1
100
90
80
60
Operating
40
20
10 Storage Range
-40 -20 0 20 40 60 80
Temperature (ºC)
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
SCAN DRIVER IC
LVDS Display TIMING ONTROLLER
Data & Clock
TFT LCD
PANEL
INPUT CONNECTOR
CLKEDID EDID
EEPROM
VEDID
24 NC No Connection (Reserve)
25 VSS Ground
26 NC No Connection (Reserve)
27 NC No Connection (Reserve)
28 VSS Ground
29 NC No Connection (Reserve)
30 NC No Connection (Reserve)
31 LED_GND LED Ground
32 LED_GND LED Ground
33 LED_GND LED Ground
34 NC No Connection (Reserve)
35 LED_PWM PWM Control Signal of LED Converter
36 LED_EN Enable Control Signal of LED Converter
37 NC No Connection (Reserve)
38 LED_VCCS LED Power Supply
39 LED_VCCS LED Power Supply
40 LED_VCCS LED Power Supply
Note (1) The first pixel is odd as shown in the following figure.
2,1 2,2
3,1
Pitch
Pitch
Ymax,
Ymax,1
Xmax
VCCS
C3
FUSE (LCD Module Input)
R1 1uF
47K
(High to Low)
(Control Signal)
Q2
R2
SW 2SK1470
1K
+12V
47K C2
VR1
C1
0.01uF
1uF
Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and fv = 60 Hz, whereas a power dissipation check pattern below is displayed.
Backlight On 2.3 - 5 V
EN Control Level
Backlight Off 0 - 0.5 V
10 - 100 %
PWM Control Duty Ratio
5 - 100 % (2)
PWM Control Permissive Ripple
VPWM_pp - - 100 mV
Voltage
PWM Control Frequency fPWM 190 - 2K Hz (3)
LED Power Current LED_VCCS =Typ. ILED 253 301 357 mA (4)
LED_VCCS(Typ)
Q1 IRL3303
C3
FUSE (LED Converter Input)
R1 1uF
47K
(High to Low)
(Control Signal)
Q2
R2
SW=24V IRL3303
1K
LED_VCCS(Typ)
VR1 47K C2
C1
0.01uF
1uF
0.5ms
90%
LED_VCC 0V 10%
LED_PWM 0V
100ms
LED_EN 0V
ILEDIS
ILEDRush
ILED
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.
Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, fPWM = 200 Hz, Duty=100%.
Note (1) LED current is measured by utilizing a high frequency current meter as shown below :
VL, IL
LED
Light Bar
Light Bar Feedback
Channels
Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter
with current balancing function to drive LED light-bar.
Note (3) PL = IL ×VL (Without LED converter transfer efficiency)
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta =
25 ±2 oC and IL = 24 mA(Per EA) until the brightness becomes ≦ 50% of its original value.
Note (1) The parameters of LVDS signals are defined as the following figures.
VCM |VID|
Single Ended
0V
VTH(LVDS)
|VID|
Differential 0V
VTL(LVDS)
T/7
Rxin2 IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE Vsync Hsync B5 B4 B3 B2
Rxin1 IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 B0 G5 G4 G3 G2 G1
Rxin0
IN6 IN5 IN4 IN3 IN2 IN1 IN0
G0 R5 R4 R3 R2 R1 R0
Tv
TVD
DE
TH
DCLK
TC
THD
DE
DATA
- LED Converter
Enable Signal, 0V
LED_EN
Note (1) Please don’t plug or unplug the interface cable when system is turned on.
Note (2) Please avoid floating state of the interface signal during signal invalid period.
Note (3) It is recommended that the backlight power must be turned on after the power supply for LCD and the
interface signal is valid.
5. OPTICAL CHARACTERISTICS
5.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25±2 C
Ambient Humidity Ha 50±10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current IL 120 mA
The measurement methods of optical characteristics are shown in Section 5.2. The following items
should be measured under the test conditions described in Section 5.1 and stable environment shown in
Note (5).