Professional Documents
Culture Documents
Mechanical Properties of A Metal PDF
Mechanical Properties of A Metal PDF
Home » Design of Machine Elements » Mechanical Properties of a Metal Mechanical Engineering Forum
Random Article!
Mechanical Properties of a Metal
Design of Machine Elements, Strength of Add comments
Materials Get Fresh Content from Mechteacher.com!
5. Malleability
6. Strength Recent Comments
7. Stiffness
swap on Kinematic Pair – Definition and Types
8. Creep
Prameela on Mechanical Properties of a Metal
9. Resilience
Palem Vamsi on How a 3-Way Catalytic Converter
10. Hardness
Works
sangam jaim on Generalized Measurement System
Elasticity: Dev Shukla on Kinematic Pair – Definition and Types
Plasticity:
Plasticity is the property by which a metal retains its deformation
permanently, when the external force applied on it is removed.
Ductility:
Ductility is the property by which a metal can be drawn into thin
wires. It is determined by percentage elongation and percentage
reduction in area of a metal.
Toughness:
When a huge external force is applied on a metal, the metal will
experience fracture. Toughness is the ability of a metal to resist
fracture.
Malleability:
It is the property by which a metal can be rolled into thin sheets.
Highly malleable metals (like Mild Steel) are extensively used in
making sheet metals.
Strength:
When external forces are applied on a metal, breaking (brittle
metal) or yielding (ductile metal) may occur. Strength is the
property of a metal by which it resists external force without
breaking or yielding.
Stiffness:
When an external force is applied on a metal, it develops an
internal resistance. The internal resistance developed per unit area
is called stress. Stiffness is the ability of a metal to resist
deformation under stress.
Creep:
When a metal is subjected to a constant load (below its yield
point), at high temperature, for a prolonged period of time, it
undergoes a permanent deformation. This tendency of the metal
is called creep.
Resilience:
Resilience is the ability of a metal to absorb energy and resist soft
and impact load.
Hardness:
Hardness is the ability of a metal to resist permanent change of
shape caused by an external force.
Subscribe
Prameela
Shall we also have discussion about trussed beams