Check input function G@d@>
You can make sure whether the machine stops as intended or not because the OSSD can go to the
OFF-stale through the external signal (check input).
‘There are two options, such as laser shutdown and check points monitoring,
You must select either if you apply this function to the SZ,
The yellow wire is assigned to the check input function.
ME case of manuavatomat or ManvalManl on the coniguaton of startet, youhave no
chance o appl tha check input tuncton tothe Sz.
112-7 nterioek (page 2-12)
Input circuit and wiring
For PNP output type cableFor NPN output type cé
SZ configurator must be used to apply the check input function to the $2.
Laser shutdown
The laser radiation from the SZ stops while the OSSD is in the OFF-state due to the check input function.
™ Time chart
’ank lype (SZ-16V) and the communication type
When trying to stop the laser projection of the m
(82-160), see [11 Laser Shutdown’ (page 2-26).
SZMNOZE 2-43
seinjeog pue euonoung wo