Professional Documents
Culture Documents
Minitab® 18 Support
Stat > DOE > Taguchi > Create Taguchi Design > Factors
In This Topic
Assign Factors
Signal Factor for a dynamic design
Complete the following steps to assign factor names, level values, and array columns. You
can also specify interactions to estimate.
Assign Factors
1. Specify whether you want to estimate interactions. If you specify interactions, Minitab
assigns factors to the array columns. If you don't specify interactions, you can change
the array columns if you want.
2. Under Name, enter a descriptive name for each factor. By default, Minitab names the
factors alphabetically, skipping the letter I.
https://support.minitab.com/en-us/minitab/18/help-and-how-to/modeling-statistics/doe/how-to/taguchi/create-taguchi-design/create-the-design/spe… 1/2
6/10/2020 Specify the factors for Create Taguchi Design - Minitab
3. Under Level Values, enter the level values for each factor. For example, an engineer
wants to test four di erent temperatures and enters 150 200 250 300.
4. Under Column, select the array columns for each factor. If you select interactions to
estimate, you cannot change the array columns that Minitab assigns. Levels shows the
number of levels for each factor. You cannot change the number of levels here. If you
want to change the number of factor levels, go to Specify the type of design for Create
Taguchi Design.
English
https://support.minitab.com/en-us/minitab/18/help-and-how-to/modeling-statistics/doe/how-to/taguchi/create-taguchi-design/create-the-design/spe… 2/2