You are on page 1of 1

Config AP

dot11 ssid CUSTOMER_SSID


max-associations 64
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii ita-customer*123

interface dot11radio0
encryption mode ciphers aes-ccm tkip
ssid CUSTOMER_SSID
no shut

interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache

line vty 0 4
transport input telnet

Router#reload

Do you want to reload the internal AP ? [yes/no]: yes

Do you want to save the configuration of the AP? [yes/no]: no

Proceed with reload? [confirm]

service-module wlan-ap 0 reload to boot up autonomous image on AP

You might also like