Professional Documents
Culture Documents
Changing Reflex Port Size
Changing Reflex Port Size
L1 A1 where L1, A1 are the original length and area, and L2, A2 are the new length
=
L 2 A2 and area
Then:
A2 L2
L 2 = L1 or A 2 = A1
A1 L1
D22
L 2 = L1 2 where D2 is new diameter and D1 is the original diameter.
D1
If there is a large change in diameter, accounting for the end correction difference is
recommended
D22
L 2 = L1 2 + (D 2 ! D1)2
D1