Sonicwave radio resource management supports the following features:
Global dynamic channel selection
Dcs scheme mode setting AP/Station connectivity quality visualization and control Mini data rate control Global dcs can help customer manage the AP’s channel. In complicated wireless environment, customer may be hard to set proper channel for many Aps. Suppose customer set the proper channel, but the wireless environment may change, and then the previous channel setting may be not proper. With help of global dcs, customer can get proper channel at any time. Taking knowledge of some AP can’t switch channel frequently, because some old station may not follow AP’s channel switch, we open three dcs scheme modes. Safe mode, switch to better channel only without client connected Steady mode, switch to new channel whenever find the better channel. Swift mode, switch to better channel as soon as interference is high on current channel. To help customer observe the network status, we show the AP and Station’s real-time quality on GUI. So customer may find out which radio become worse and which station works bad. Customer can enable the feature, and the AP can take some action to recover from the bad status. In high density deployment environment, station may associate with a far AP, because the SNR is adequate for minimum data rate. So, we can increase the minimum data rate, station need higher SNR to keep associated to this far AP. If the station can’t get the higher SNR, he has to try to associate with the AP closer to him.