AB - Purpose The purpose of this paper is to obtain an accurate methodology for
modelling and analysis of the permanent magnet synchronous generator connected to power electronic components.Design/methodology/approach This paper presents the methodology of the co-simulation of a permanent magnet synchronous generator. It combines Simulink, Maxwell and Simplorer software to demonstrate the electrical machine behaviour connected with the power electronics’ circuit. The finite element analysis performed on the designed machine exhibit a more accurate behaviour over simplified Simulink models. Results between both simulation and co-simulation are compared to measurements.Findings The co-simulation approach offers a more accurate depiction of the machine behaviour and its interaction with the non-linear circuits.Research limitations/implications This paper focuses on the interior permanent magnet type of PMSG and its interaction with a passive rectifier (nonlinear circuit).Practical implications The advanced capabilities of the co- simulation method allow to analyse more variations (geometry, materials, etc.), and its interaction with non-linear circuits, than previous simulation techniques.Originality/value The co-simulation as a tool for analysis and design of systems interconnected with unconventional and conventional electrical machines and prototypes, and the comparison of the obtained results with classical analysis and design methods, against measurements obtained from the prototype. VL - 38 IS - 6 SN - 0332-1649 DO - 10.1108/COMPEL-12-2018-0501 UR - https://doi.org/10.1108/COMPEL-12-2018-0501 AU - Quintal-Palomo Roberto Eduardo AU - Gwozdziewicz Maciej AU - Dybkowski Mateusz PY - 2019 Y1 - 2019/01/01 TI - Modelling and co-simulation of a permanent magnet synchronous generator T2 - COMPEL - The international journal for computation and mathematics in electrical and electronic engineering PB - Emerald Publishing Limited SP - 1904 EP - 1917 Y2 - 2020/07/11 ER -