Professional Documents
Culture Documents
Registration SAE collegiate club must be at least one year old No restriction on the time.
20S232 0036 - F1
205432 0536 - E9
Allowed Engine 205332 0536 - E9 19L232-0054-G1(Vanguard Series). 20 Series engine prohibited.
205332 0536 - B1
19L232-0054-G1
Governer Spring #5 for 19 Series, #6 for 20 series #5 for 19 series
Mitered Joints greater than 5 deg. Considered as a bend, and
Bend No rules for mitered joints.
less than 5 deg as butt joint.
Roll cage and Frame Members must be fully welded, and welds
must not be ground, sanded or modified so as to prevent
RollCage Members None inspection. Roll Cage Members that are bent must not exhibit
any wrinkles, kinks or any detrimental deformation to the cross-
section.
Cockpit Kill Switch Must be in the easy reach of driver Must be on the left side of driver along the SIM
Reverse Light No restriction on type LED strips for Reverse lights are strictly prohibited
No specific rule for type of hitch plate i.e Welded or Rear hitch Plate must be welded to the to the rollcage. Latch
Rear Hitch Plate
Latch Type type rear hitch plates are not allowed
Vehicle numbers shall be displayed in either the “Highway
Required Number Font None specfied Gothic Regular” font or “Century Gothic Bold” font. No other
fonts are permitted.
The colors are high contrast and facilitate fast vehicle
The colors are high contrast and facilitate fast vehicle
Number Colour identification. The number backing panel shall be all one color
identification.
and all numerals shall be of matching color.