Commissioning Proline Promag H 300 HART
10.4.3 Displaying the I/0 configuration
The VO configuration submenu guides the user systematically through all the parameters
in which the configuration of the I/O modules is displayed.
Navigation
‘Setup’ menu > 1/0 configuration
70 mode om terminal numbers >a
70 mage Tom iforation > Dre
vO module Lon ype > Bre
Apeir70 entiation >
Eonverson code >Bre
Parameter overview with brief description,
Parameter Deception ‘User interface Selection Factory sting
User entry
Shows the vninal numbers used bythe 0» Netused =
mele, 126-27 00 1
VO wade Ton infarmation | Shaws tformation of the plugged VO
mocule,
Not phage =
1 valid
# Not configurable
TO motile vom ae
Curent output
Status put”
1 Pale/equen
‘ply 70 enfiguraton apply paramereztion ote fresiy = No P
Visit depends on order options or device settings
10.4.4 Configuring the status input
‘The Status Input submenu guides the user systematically through all the parameters that
have to be set for configuring the status input.
8 Endresst HauserProline Promag H 300 HART
Navigation
‘Setup’ menu > Status input
> Siatusinpat Ton
esign matin np >an
Tearinal number an
‘ave evel >an
Terainal monet an
Response tine nats np an
Terminal number an
Parameter overview with brief description
Parmeter Deepa ‘Deer interfnce/Scletion Factory ang
User entry
Frerminal number Shows the ermine numbers used by Wot wsed =
satus input module = 24-25 02)
= 22:23 03)
> Reset totes 1
> Reset toakier 2
> Reset oairer 3
> Reset al totalzers
Endress* Hauser
have to be set for configuring the current input.
Fi
ave Define npursgnal eve atwhichthe |» High Fish
signed funeons wigered. > tow
Response te nas ap Deise die minimum amount of tine te [510200 me 50m
selected fueton staged
10.4.5 Configuring the current input
The “Current input" wizard guides the user systematically through all the parameters that
[vamave CS
Navigation
‘Setup’ menu > Current input
> carent input ton
Terral amber > mao
iralmode > Deo
» Bao
9