Professional Documents
Culture Documents
Agisson Aqu4518r18 PDF
Agisson Aqu4518r18 PDF
DXXXX-690-960/690-960/1710-2690/1710-2690-65/65/65/65-16i/16i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) 2 x (1710 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
0 - 12, continuously adjustable, each band 2 - 12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
at mid Tilt 15.5 15.9 16.1 16.2 17.0 17.2 17.8 18.3
Gain (dBi)
over all Tilts 15.4 ± 0.5 15.8 ± 0.4 16.0 ± 0.3 16.1 ± 0.3 16.8 ± 0.5 17.1 ± 0.5 17.7 ± 0.5 18.2 ± 0.5
Side lobe suppression for first side
18 20 20 18 19 20 20 18
lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ± 5 66 ± 4 64 ± 3 62 ± 3 60 ± 5 62 ± 5 60 ± 5 60 ± 5
Vertical 3dB beam width (°) 10.4 ± 0.8 9.5 ± 0.5 9.2 ± 0.4 8.5 ± 0.4 7.2 ± 0.7 6.5 ± 0.6 5.7 ± 0.5 5.3 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) 25 27 27 26 26 28 28 29
Cross polar ratio (dB) 0° 24 23 22 20 22 20 25 26
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Total power (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2087 x 548 x 135
Packing dimensions (H x W x D) (mm) 2380 x 705 x 270
Antenna weight (kg) 47.0
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 60.4 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 1525 (at 150 km/h)
Wind load (N) Lateral: 225 (at 150 km/h)
Rear side: 1670 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 8 x 7/16 DIN Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
1
AQU4518R18
DXXXX-690-960/690-960/1710-2690/1710-2690-65/65/65/65-16i/16i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
106
L R
2087
1387
Integrated RET S/N:
HWMxxx…L…r
HWMxxx…L…y
y y
HWMxxx…R...r
HWMxxx…R...y
r - Red y - Yellow
r r L - Left antenna
R - Right antenna
2
AQU4518R18
DXXXX-690-960/690-960/1710-2690/1710-2690-65/65/65/65-16i/16i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m
Right Antenna
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2015-06-17