Professional Documents
Culture Documents
Modular design
A modular hardware design enables the FLEX monitor to fit in various
wall thickness found around the globe. For applications which require the
monitor to fit in wall depths less than 50mm, the FLEX can be ordered with
an external pressure sensor. When mounting in a three gang electrical box,
the FLEX can be ordered with an integrated on-board sensor. Sufficient on-
board I/O provides connectivity for most common equipment and sensor
applications. If additional connections are required, or if more advanced
HVAC applications demand it, FLEX can work directly with a third party
Environmental Monitor controller over BACnet. A high accuracy 0.25% differential pressure
transducer is used in all pressure sensing options. A projected capacitive
• Supports 3 rooms, 6 parameters each
touch screen provides swipe functionality and allows for use with medical
• 7” Projected capacitive touch screen
gloves. The faceplate is attached to the unit body, enabling both tamper
• BACnet/IP & BACnet MS/TP
resistant operation and easy opening for pressure calibration.
• Flush mount to wall
• Mounts in standard electrical boxes
• Full touch response with medical gloves Setra FLEX-RM and FLEX-RC
• No programing required
FLEX software is designed to suit any application, with the ability to support
• 4 Inputs & 2 outputs on-board
up to 3 rooms. FLEX-RM (Room Monitor) provides monitoring only, for
• On-board or external pressure transducer
those applications where no control from the touch screen is needed.
• High accuracy 0.25% sensor standard
FLEX-RC (Room Control) offers monitoring, plus PI loop or network control
• Monitor and control pressure, temperature, humidity,
of VAV boxes, venturi valves, or hydronic reheat valves. Software is pre-
air change rate, and 2 user-defined parameters
installed, with configuration and network integration done using simple
• 4 Customizable room profiles
setup screens. There is no programming required. When completed,
• 2 Levels of password security
configuration settings on one unit can be cloned to other devices using a
• User-defined on-screen text and icons
standard USB thumb drive, thereby shortening commissioning time. Units
• Configuration options help reduce nuisance alarms
can also be configured remotely over a BACnet network.
• 50mm Wall depth when sensor is mounted remotely
• Cloning features reduces time required for multi-unit installation
The FLEX monitor is both a controller and monitor, with audible and
• Remote duplicate display shows parameters inside
visual alarming on all room environmental parameters. The FLEX monitor
and outside of rooms
enables users to save energy by choosing from two PI control loops and
two monitoring sets for any of four room modes, such as occupied and
unoccupied.
Triple-gang, double deep electrical box. RACO 697, Badges display pressure, temperature, humidity, air
Mounting change rate, and 2 user-defined parameters. Each
Appleton M3-350, or equivalent Parameters per room (6) capable of monitor or control.
Case Fire-retardant plastic UL94 V-0 All information available over BACnet.
© Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc. | www.setra.com | 800.257.3872
Setra FLEXTM | Environmental Monitor
Ordering information
Example part number: FLEX0R1WBRM7S4
Setra Flex, ±0.10” W.C., Room monitor only, 7 inch display, Setra logo on faceplate, 4 pressure snubbers:.
F L E X 7 S
Model Pressure transducer range Monitor or controller Display Faceplate Pressure snubber1
for on-board sensor
FLEX Setra FLEXTM Monitor only, 7 7“ screen S Setra logo N Quantity 0
R05WB ±0.05” WC RM
no control operation
0R1WB ±0.10” WC 1 Quantity 1
Control and
R25WB ±0.25” WC 2 Quantity 2
monitoring,
RC
0R5WB ±0.50” WC full control
3 Quantity 3
001WB ±1.00” WC operation
025LB ±25 Pa wall box. Typically 2 are required for each room. 5 Quantity 5
050LB ±50 Pa 6 Quantity 6
100LB ±100 Pa
250LB ±250 Pa
NNNNN No transducer
2 6 4 1 A 1 F 2 6 7 1 A 1
[1] [2] [3] [4] [5] [1] [2] [3] [4] [5]
[1] [2] [3] [4] [5] [1] [2] [3] [4] [5]
Model Pressure range Output Electrical Accuracy Model Pressure range Output Electrical Accuracy
(bidirectional) Termination (bidirectional) Termination
2641 Model 264 11 4-20 mA F ±0.25% FS 2671 Model 267 11 4-20 mA ±0.25% FS,
R05WB ±0.05” WC 1/2 in. R05WB ±0.05” WC 1/2 in.
2D 0-5 VDC A1 conduit 2D 0-5 VDC A1 Conduit FN no LCD
0R1WB ±0.1” WC 0R1WB ±0.1” WC display
enclosure 2E 0-10 VDC Enclosure
R25WB ±0.25” WC R25WB ±0.25” WC ±0.25% FS,
0R5WB ±0.5” WC 0R5WB ±0.5” WC FD w/ LCD
display
001WB ±1” WC 001WB ±1” WC
© Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc. | www.setra.com | 800.257.3872
Setra FLEXTM | Environmental Monitor
229971 229973
(For FLEX with on-board pressure module) (For FLEX without on-board pressure module)
© Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc. | www.setra.com | 800.257.3872