Professional Documents
Culture Documents
Location:
The Legacy Companies Item #: Qty:
3355 Enterprise Avenue, Suite 160, Fort Lauderdale, FL 33331
Sales: (954) 202-7419 • Sales@TheLegacyCompanies.com Model:
Tech Service: (877) 368-2797 www.BlakesleeInc.com
FEATURES
• 40 racks per hour / 90 seconds cycle
• Built-in rinse-aid pump
• 85°C sanitizing rinse every cycle
• Built-in 6000 watt booster heater
• 2700 watt wash tank heater
• Low 2.8L (0.73 gal ) water usage per rack
• Removable wash and rinse arms (upper and lower)
for ease of cleaning
• Straight or corner installation with easy removable rack
• Hood operated start/stop functions
• Deep formed tank
• Built-in drain pump
• Easy to access for maintenance
CONSTRUCTION
• Heavy duty stainless steel construction. Internal cavity as well
as exterior panels are in 304 series stainless steel
NOISE
• 63,6±0.7 dB(A)
DRAIN PUMP
ELECTRIC 25W hMAX draining (0.8m/40L/min***)
Voltage:
380V-415V/3N/50-60Hz ***Maximum Flow Rate
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While we exercise good
faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications.
By using the information provided, the user assumes all risks in connection with such use.
The built in performance enhancing functions ensure that given proper attention and preventative maintenance,
Each product will deliver years of trouble free, reliable, low maintenance, efficient operation. 11/01/2016W
Project Name:
Location:
The Legacy Companies Item #: Qty:
3355 Enterprise Avenue, Suite 160, Fort Lauderdale, FL 33331
Sales: (954) 202-7419 • Sales@TheLegacyCompanies.com Model:
Tech Service: (877) 368-2797 www.BlakesleeInc.com
40mm (1 5/8”)
55mm (2 1/8”)
75mm (3”)
420mm (16 1/2”)
390mm (15 3/8”)
690mm (27 1/8”)
210mm (8 1/4” )
130mm (5 1/8” )
130mm ( 5 1/8”)
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice.
While we exercise good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications.
By using the information provided, the user assumes all risks in connection with such use.