Professional Documents
Culture Documents
Design of Bored Piles: Calculation Sheet
Design of Bored Piles: Calculation Sheet
LOAD COMB. = 1.0(DL + MEQ/R) NOTE : R =1.00 FOR SHEAR AND AXIAL
Note : This will be the design forces in the interaction diagram using f - factor equal to 0.50
for axial and 0.90 for bending
G. TRANSVERSE REINFORCEMENT
Minimum Axial Stress = 0.00 kPa if min axial stress is less than 0.10f'c
0.10 f'c = 2,800.00 kPa uc is equal to zero, otherwise use 1/6(f'c) 1/2
uc = 881.92 kPa
Spiral Diameter = 16.00 mm h= 1.00 m
As = 201.06 mm2 bw = 1.00 m
Av = 402.12 mm2 d = 0.75 m
fy = 414.00 MPa ds = 0.88 m
Finally, Use 16 mm f @ 75.00 mm pitch over 1.00 m. from both ends of column
and rest @ 150 mm pitch