Professional Documents
Culture Documents
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / Legal
Information
Legal Information
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\AE\Release Date:31-Mar-2006\EDMS UID: 1649045887\Produced: 5-Apr-2006 21:30:39
This work contains the confidential and proprietary trade secrets of Schlumberger
and may not be copied or stored in an information retrieval system, transferred,
used, distributed, translated or retransmitted in any form or by any means,
electronic or mechanical, in whole or in part, without the express written
permission of the copyright owner.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / Document
Control
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\AE\Release Date:31-Mar-2006\EDMS UID: 1649045887\Produced: 5-Apr-2006 21:30:39
Document Control
Owner: SPC Engineering and Manufacturing
Approver: SPC-LWDSUS-DOC
SPC-LWDSUS-DOC@slb.com
Contact Information
Name: SPC Engineering and Manufacturing
Revision History
Rev Effective Date Description Prepared by
AE 31-Mar-2006 GEMS Document No. S-288035 Indra Tjahjono
Version AE
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / Document
Control
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\AE\Release Date: 31-Mar-2006\EDMS UID: 1649045887\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
Drilling and Measurements Collar Torque Specification (S-288035 Version AE) /
Foreword
This version of the document completely replaces any other version, published
or unpublished. Check that the version you are using matches the controlled
version published in InTouch. Document version information is indicated on the
document cover page. To confirm you are using the correct version, check that
the reference, version, release date, EDMS UID, and production date and time
all match those on the controlled version of the document. Refer to the document
control page for the document revision history.
SPC-T&S\EDMS\InTouch 3837799\1.0\Release Date:21-Jan-2003\EDMS UID: 274784793\Published: 5-Apr-2006 21:30:39
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
Drilling and Measurements Collar Torque Specification (S-288035 Version AE) /
Foreword
SPC-T&S\EDMS\InTouch 3837799\1.0\Release Date:21-Jan-2003\EDMS UID: 274784793\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
vii Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / vii
Table of Contents
Table of Contents
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\AE\Release Date:31-Mar-2006\EDMS UID: 1649045887\Produced: 5-Apr-2006 21:30:39
Foreword _________________________________________________________ v
1 Scope ____________________________________________________________ 1
2 Requirements ____________________________________________________ 3
5 Glossary _________________________________________________________ 9
8 Authority ________________________________________________________ 33
Appendix
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
viii Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / viii
Table of Contents
A Appendix __________________________________________________________ 37
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\AE\Release Date:31-Mar-2006\EDMS UID: 1649045887\Produced: 5-Apr-2006 21:30:39
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
1 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 1
Scope
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045238\Produced: 5-Apr-2006 21:30:39
The purpose of this document is to provide a standard set of collar torque charts
for Field personnel to use when making-up Schlumberger collars and equipment.
The torque values in the following charts are to be used to make-up connections
on Schlumberger drill collars.
Quality Note
The charts are not to be used to design a particular connection, since the BSR
values of certain combinations may exceed the Engineering recommended
values.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
2 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 2
Scope
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045238\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
3 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 3
Requirements
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045247\Produced: 5-Apr-2006 21:30:39
• thread type
• the outside diameter (O.D.) of the female thread connection (BOX)
• the through inside diameter (I.D.) of the male thread connection (PIN), this
is not the bore of the lead-in taper.
Refer to the diagrams on each set of connection charts for measurement location.
The calculations also assume proper use of lubrication. Spray coat all threads
with Moly duolube, allow to dry and then apply an even layer of CopperKote to all
threads as recommended by Engineering for proper collar make-up.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
4 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 4
Requirements
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045247\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
5 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) 5
/ Quality assurance provisions
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045248\Produced: 5-Apr-2006 21:30:39
In order to provide quality service to the torques given in this document, the
collars and equipment must be in good working condition. Collar connection
inspections are essential to ensure that there are no cracks, pits, or galling
present in the threads or seal faces prior to make up.
In certain cases, collar torques may be specified differently from this specification.
Reduced torque is used to increase the fatigue (dog-leg severity rating). In
underbalanced drilling, increased torque may be required in which case, follow
the UOP.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
6 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) 6
/ Quality assurance provisions
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045248\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
7 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 7
Packaging and identification
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045249\Produced: 5-Apr-2006 21:30:39
Not applicable
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
8 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 8
Packaging and identification
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045249\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
9 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 9
Glossary
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045250\Produced: 5-Apr-2006 21:30:39
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
10 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 10
Glossary
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045250\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
11 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 11
Instructions and examples
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649040825\Produced: 5-Apr-2006 21:30:39
To use these charts you must determine the thread type, the O.D. of the BOX
connection and the through I.D. of the PIN connection, not the bore of the lead-in
taper. Refer to Figure 6-1 on each set of connection charts for measurement
location.
Rounding all measured values to the closest even tenth value is required to use
the charts. Any number falling exactly half way between values must always
round up.
Example
4.12 rounds up to 4.20
The values have been calculated for each connection and the actual torque to
apply is determined by picking the lowest torque value from the PIN or BOX
charts for the given joint dimensions.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
12 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 12
Instructions and examples
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649040825\Produced: 5-Apr-2006 21:30:39
6.1 Example 1
PIN BOX
I.D. I.D.
You have an 8 ¼-inch drill collar made from non-mag material with a 6 ⅝-REG
PIN connection that you want to make-up to a Saver Sub also made of non-mag
material. To determine the correct torque specification for the connection, follow
these procedures:
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
13 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 13
Instructions and examples
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649040825\Produced: 5-Apr-2006 21:30:39
5. In the chart for the BOX connection, determine the torque by locating the
value that corresponds with the dimension of 8.40 inches and a material type
of non-mag drill collar. The torque value is 70,000 ft-lbs.
Note
The lower torque value for the PIN shows that this connection is PIN weak
6.2 Example 2
PIN BOX
I.D. I.D.
You have a 6 ¾-in drill collar made from non-mag material with a 5 ½ FH BOX
connection that you want to make-up to a Saver Sub made of INCONEL 718
material.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
14 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 14
Instructions and examples
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649040825\Produced: 5-Apr-2006 21:30:39
4. In the chart for the PIN connection, determine the torque by locating the
value that corresponds with the dimension of 3.60 inches and a material type
of INCONEL 718. The torque value is 33,000 ft-lbs.
5. In the chart for the BOX connection, determine the torque by locating the
value that corresponds with the dimension of 6.80 inches and a material type
of non-mag drill collar. The torque value is 22,000 ft-lbs.
Note
The lower torque values for the BOX shows that this connection is BOX weak
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
15 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 15
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
The following are various sized connection torque charts for Field personnel to
use when making up Schlumberger collars and equipment. The torque values in
the following charts are to be used to make up connections for Schlumberger
drill collars. The charts are not to be used to design a particular connection
since the BSR values of certain combinations may exceed the Engineering
recommended values.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
16 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 16
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
17 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 17
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
18 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 18
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
19 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 19
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
20 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 20
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
21 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 21
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
22 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 22
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
23 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 23
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
24 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 24
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
25 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 25
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
26 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 26
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
27 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 27
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
28 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 28
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
29 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 29
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
30 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 30
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
31 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 31
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
PIN BOX
I.D. I.D.
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
32 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 32
Connection torque charts
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045824\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
33 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 33
Authority
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045252\Produced: 5-Apr-2006 21:30:39
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
34 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 34
Authority
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045252\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
35 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) 35
/ Reference Documents
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045869\Produced: 5-Apr-2006 21:30:39
API RP 7G - Recommended Practice for Drill Stem Design and Operating Limits
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
36 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) 36
/ Reference Documents
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649045869\Produced: 5-Apr-2006 21:30:39
Intentionally Blank
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.
37 Drilling and Measurements Collar Torque Specification (S-288035 Version AE) / 37
Appendix
SPC Engineering and Manufacturing\SPC Engineering and Manufacturing\InTouch 3837799\1.0\Release Date:31-Mar-2006\EDMS UID: 1649040828\Produced: 5-Apr-2006 21:30:39
The following assumptions and values were used in determining the calculated
torque values in this specification. These assumptions are based on API
recommendations, Drilling & Measurements Engineering modeling, Engineering
lab tests and actual strengths of materials in use by Drilling and Measurements
Private
Copyright © 2006 Schlumberger, Unpublished Work. All rights reserved.