Professional Documents
Culture Documents
DOCUMENT 12023
compression molding
For Round Bars and Tubes – TFS Presses
Straightening press fixtures are available in a variety of sizes and designs to meet your
straightening
applications. Designs are available for straightening a variety of products including
machined, ground, or polished steel bars, as-forged bars, and heavy-wall or thin-wall
sheet molding
tubing.
drawing
assembly
horizontal
compaction
powder compaction
laminating
gluing/bonding
Lift / Rotation Stand V-Block Anvil
Replaceable hardened liners
forcing
Powered worklift raises bar above anvils
Available brass non-marring liners
Powered rotation to find high spots
Full-width bed contact when pressing
die repair
Powered traverse to position the stands
Interchangeable with U-blocks
Spring-loaded wheels lift assembly during travel
Spring-loaded wheels lift assembly during travel
blanking
Edge roller guides maintain centerline
Edge roller guides maintain centerline
die spotting
18" Diameter
special work
Tube in U-Blocks
composites molding
Courtesy of
Halliburton
bulldozing
trimming
Quick-Change U-Blocks
5" – 12" Diameters Shown
hot press