You are on page 1of 2

EXPERIMENT 7 - VLAN TRUNK PROTOCOL

Implementation of Simple Trunk (VTP) using 4PCs and two switches.


a. Configure IP address and hostnames on PCs
b. Configure 2 VLAN’s, VLAN1 and VLAN2 in switch using commands
c. Assign Connected two Physical Ports to VLAN1 and remaining ports to VLAN2
d. Check the Connection using ping command
e. View ARP tables on each PC
f. View MAC table on switch
g. View VLAN Database
h. Configure Trunk port on VLAN1 and VLAN2 using commands
i. Check the Connection using ping command

You might also like