Professional Documents
Culture Documents
Instructions
Coffee System
CVA 4062
CVA 4068
2
Contents
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tone options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Showroom program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Restoring factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the serving sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Selecting a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Descaling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
3
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances basic safety precautions should always be
followed, including the following:
Read all instructions before installation or use of the coffee system.
Proper use
Please read these instructions
carefully to prevent accidents and ~ This coffee system is for household
use only, for the preparation of coffee
machine damage.
beverages (espresso, cappuccino, latte
macchiato, etc.).
This appliance complies with current
Do not use this machine other than for
safety requirements. Improper use
its intended use. Any other use could
of the appliance can cause personal
be hazardous.
injury and material damage.
~ Persons which lack physical,
Read this safety information carefully sensory or mental abilities or
before operating the appliance. experience with the machine should not
They contain important information use it without supervision or instruction
on the safe installation, operation, by a responsible person.
and care of your coffee system. To
avoid the risk of personal injury or Children
damage to the coffee system, it is
important that you carefully read the ~ Close supervision is necessary
instructions. when any appliance is used by or near
children. They could easily be scalded
or burned.
Keep them in a safe place and pass
them on to any future user. ~ Never let children play with the
coffee system.
4
IMPORTANT SAFETY INSTRUCTIONS
Technical safety ~ If the appliance is installed behind a
door front, use the appliance only when
~ Before installing the appliance, the door front is open. Do not close the
check for externally visible damage.
door front when the appliance is in
Do not operate a damaged appliance.
operation.
~ Before connecting the appliance to ~ Before service or maintenance
the electrical supply make sure that the
disconnect the power supply by either
voltage and frequency listed on the
removing the fuse, "tripping" the circuit
data plate correspond with the
breaker or unplugging the unit.
household electrical supply. If in doubt,
consult a qualified technician. ~ This appliance is not designed for
maritime use or for use in mobile
~ Be certain your appliance is installations such as recreational
properly installed and grounded by a
vehicles or aircraft. However, under
qualified technician. To guarantee the
certain conditions it may be possible for
electrical safety of this appliance,
installation in these applications. Please
continuity must exist between the
contact the Miele Technical Service
appliance and an effective grounding
Department with specific requirements.
system. It is imperative that this basic
safety requirement be met. If there is ~ Installation work and repairs must
any doubt, have the electrical system of only be performed by a trained
the house checked by a qualified technician in accordance with national
electrician. and local safety regulations. Repairs
and other work by unauthorized
~ The appliance must be properly persons could be dangerous and may
installed before operation to ensure that
void the warranty.
no electrical components are
accessible. Ensure that power is not ~ While the appliance is under
supplied to the appliance while warranty repairs should only be
installation work, repairs or performed by an authorized service
maintenance is performed. technician. Otherwise the warranty is
void.
~ Do not use an extension cord to
connect the appliance to electricity. ~ Defective components should be
Extension cords do not guarantee the replaced by Miele original spare parts
required safety of the appliance only. Only with these parts can the
(danger of overheating and open manufacturer guarantee the safety of
ground circuit). the appliance.
~ Do not install or use outdoors even if ~ To protect against fire, electric
installed in the display cabinet. shock and injury to persons do not
submerge the cord or plugs in water or
other liquids.
5
IMPORTANT SAFETY INSTRUCTIONS
~ Do not let the cord hang over the Use
edge of a table or counter, or touch hot
surfaces. Caution! Do not look directly or with
an optical instrument into the
~ Do not operate any appliance with a lighting - laser radiation.
damaged cord or plug, or after the
appliance malfunctions or has been
damaged in any manner. Contact
Caution! Risk of burns when
Miele.
dispensing hot beverages, they are
~ Always attach the cord to the extremely hot.
appliance first, then plug it into the wall
outlet. To disconnect, turn the machine ~ Before the first use, flush the supply
off, then remove the plug from the wall lines for water and milk and thoroughly
outlet. clean the coffee system and
stainless-steel milk container.
~ Never open the outer casing of the
appliance. Tampering with electrical ~ Only fill the water tank with cold,
connections or components and fresh tap water. Warm or hot water, or
mechanical parts is dangerous and any other liquids may damage the
may cause machine damage. machine. The water should be changed
daily to prevent bacteria or mold
~ If installed in combination with growth.
another appliance, a protective base
must be installed between the coffee ~ Do not use deionized or mineral
system and the appliance. water. They may lead to heavy calcium
built-up in the machine that can
~ Install or locate this appliance only damage the unit.
in accordance with the provided
installation instructions. ~ Do not put anything but coffee
beans into the beans container. Do not
put ground coffee in the beans
container, it will damage the grinding
unit.
~ Do not fill anything but ground
coffee or a cleaning tablet (for the brew
unit) in the funnel for ground coffee,
otherwise it will get damaged.
~ Only use plain milk. Flavored milk
products contain substances that can
clog the coffee system.
6
IMPORTANT SAFETY INSTRUCTIONS
~ Sugar can damage the appliance! ~ The appliance must be descaled
Caramelized or otherwise pre-treated regularly with the supplied descaling
coffee beans or other sugar containing tablets. In areas with very hard water
beverages must not be put in the the machine may need to be descaled
machine. more often.
~ Never place a cup with an ~ Only use the descaling tablets
alcohol-coffee mixture underneath the provided by Miele. Take care to use the
main dispenser. Plastic parts of the unit correct mixture of water and descaler,
could catch fire! otherwise it may cause damage.
~ The hot water and steam dispensed ~ Depending on the oil content of the
could cause scalding. These functions coffee, the brew unit may clog. Clean
must be used carefully. Never hold any the brew unit every 200 cups with a
parts of the body under the steam cleaning tablet. The display shows a
nozzle or the hot water dispenser. The reminder message.
machine must never be used to clean
objects. ~ Dispose of the coffee waste in a
trash can, not in the sink. The sink
~ Never use a steam cleaner to clean could get clogged.
the appliance. Pressurized steam could
damage electrical components and ~ Do not hang, lean, sit or place heavy
items on the door. The machine could
cause a short circuit.
be damaged.
~ Clean the coffee system daily to ~ The use of accessory attachments
prevent bacterial growth. All parts of
not recommended by the appliance
the coffee system are dishwasher-safe
manufacturer may result in fire, electric
except for the brew unit, bean
shock or injury to persons.
container, stainless-steel milk container
and lid, and main dispenser cover. ~ The appliance is designed for use
Failure to properly maintain machine in room temperatures between 59°F
may cause health issues. and 140°F (15°C and 60°C). Do not use
the appliance outside of this range of
~ Be aware of how long milk in stored temperatures.
in the milk container. If milk is not
continually cooled it can readily spoil
causing illness. Be sure the milk SAVE THESE INSTRUCTIONS
container and pipework are properly AND REVIEW THEM
cleaned and maintained. See "Cleaning PERIODICALLY
and Care" for more information.
~ To avoid injuries allow the coffee
system to cool before cleaning or
putting on and taking off parts. Turn the
machine off at the main switch when
not in use and before cleaning.
7
Guide to the coffee system
Front view
8
Guide to the coffee system
Interior view
a Main switch
b Storage drawer
c Funnel for ground coffee
d Grind control slide
e Coffee bean container
f Drip tray with no-spill grid for transport
g Water tank
h Brew unit
i Waste unit
j Main dispenser connector (connects the brew unit to the main dispenser)
k Stainless-steel milk container
9
Guide to the coffee system
Cleaning tablets
10
First steps to use
Espresso
Clean the appliance and remove
q r H I J L n m C any protective film before the first
The following symbols appear in the use. See "Cleaning and Care".
main menu display:
Turning on
q Espresso
^ Select On/Off s to turn the machine
r Coffee
on.
H Cappuccino
The first few times the machine is
I Latte macchiato turned on with the main switch, a
welcome screen will appear briefly on
J Hot milk
the display, followed by additional
L Milk froth messages. The welcome screen is
displayed each time the machine is
n User profile for up to nine
turned on until 5 drinks have been
different users
prepared:
G Maintenance programs
C Settings: to customize Míele
your coffee system Welcome
^ Use the arrow buttons to select a During the very first use, you will be
program item from the display. Once prompted to select a language.
highlighted, confirm with OK.
^ Tap < or > until the desired language
appears in the display.
^ Confirm with OK.
The language is now set.
11
First steps to use
You will then be prompted to set the If everything has been entered
Time format. correctly, Set up successful will
appear in the display.
^ Tap < or > until the time format you
wish to select (12-hour or 24-hour) is ^ Confirm the message with OK.
highlighted, confirm with OK.
Turning off
^ Enter the Time of day: First set the
hours using < or >, confirm with OK. ^ Tap the On/Off button s to turn the
Repeat to set the minutes. machine off.
^ Now specify when the time of day
If the automatic rinse feature is
should be displayed:
enabled, the machine will start the
– On: The time will be displayed even rinse cycle as soon as a coffee or
when the machine is turned off. milk-based drink has been
dispensed. It will not shut off until
– On for 60 seconds: The time will be
after the rinse cycle is complete.
displayed for 60 seconds after
the machine has been turned off.
– Do not display: The display will go
dark as soon as the machine is
turned off.
^ Confirm with OK.
^ Select OK to confirm the message
indicating that your coffee system is
communication enabled.
12
Filling water, beans or ground coffee
13
Filling water, beans or ground coffee
14
Preparing drinks
Water will now flow from the main
Clean the coffee system daily to dispenser and into the drip tray.
prevent bacterial growth. All parts of The machine will notify you when the
the coffee system are drip tray is full, but the tray should be
dishwasher-safe except for the brew emptied daily.
unit, bean container, stainless-steel
The main menu then appears in the
milk container and lid, and main
display:
dispenser cover. Failure to properly
maintain machine may cause health
issues. See "Cleaning and Care". Espresso
q r H I J L n m C
The lines should be rinsed daily
before the first use. This will happen
automatically if the rinsing feature is Pre-warming cups
set to "On" (see "Settings - Rinse All beverages should be made in a
Automatic") and the machine is cold. warm cup, to develop the aroma. The
After heating, hot water runs out of smaller the amount of coffee or
the two spouts into the drip tray. If espresso and the thicker the cups, the
the rinse feature was set to "Off", more important it is to pre-warm the
select "Rinsing" to rinse the lines. cups.
See "Cleaning and Care - Rinsing
the system". ^ Place an empty cup under the hot
water spout.
Turning on ^ Select hot water -.
^ Select On/Off s. ^ Hot water is dispensed. Select OK to
stop the flow.
The following message appears in the
display: ^ Let the hot water sit for a moment to
pre-warm the cup, then empty the
Heating phase cup and prepare the beverage.
Rinsing
15
Preparing drinks
16
Preparing drinks
Double portion Coffee and espresso prepared
If you would like a double portion of from ground coffee
coffee or espresso, or to prepare two After filling the funnel with ground
portions at the same time, coffee (see "Filling water, beans or
^ tap the OK button a second time, ground coffee - Filling ground coffee"),
while the display reads "2 portions?". the display shows:
Interrupting preparation
^ Tap OK when you see "Stop" in the
display.
Preparation will immediately stop.
17
Preparing drinks
Prepare beverages Beverages with milk
^ Place a cup under the main spout.
Stainless steel milk container
^ Tap the OK button.
The stainless steel milk container is
The appliance brews the espresso or vacuum insulated, to keep milk cold for
coffee, and the selected beverage is a period of time. With an ambient
dispensed from the main spout. temperature of about 68°F (20°C), milk
at 43°F (6°C) can be stored for 11-12
Do not open the appliance door hours and remain under 55°F (13°C).
during the brewing process. The (Milk that is warmer than 55°F (13°C)
appliance will be damaged. should not be used because it will not
After dispensing, the appliance make good milk froth.)
automatically reverts to bean Milk cannot be stored as long if there is
operation. a warming drawer underneath the
coffee machine.
Interrupt preparation
Do not fill the container to the rim,
^ During preparation, tap the OK
leave a gap of approx. 1" - 1 ½"
button when "Stop" appears in the
(2 - 3 cm) from the top.
display.
Preparation will immediately stop.
Make sure to keep the top and seals
If you use ground coffee, only one of the container clean. Soiling can
serving is prepared at a time. The cause affect the functioning of the
appliance always uses the entire milk container.
portion of ground coffee loaded into
the funnel, for one beverage. Cold milk is best for creating froth.
Always pre-warm the cup with hot
water, before you prepare a beverage.
18
Preparing drinks
To prepare beverages with milk, Cappuccino, latte macchiato, hot
milk, froth
^ Place a suitable cup or glass under
both dispensers.
19
Preparing drinks
User profile
q r H I J L n m C
^ Tap < or > until "User profile" is
highlighted, confirm with OK.
^ Tap < or > to select "Select", confirm
with OK.
^ Use < or > to select the desired user
profile, confirm with OK.
A large user profile n symbol will
appear in the display to show that a
profile has been selected.
20
Adjusting the coffee grinder
The finer the coffee beans are ground To adjust the grinder setting
determines the strength of the coffee
and the quality of the crema.
21
Settings
The coffee system can be customized Language
to suit individual preferences.
You can select the language for all text
and messages displayed on your
Settings menu machine.
^ Select "Settings F" and confirm with
Settings F OK.
q r H I J L n m C
Settings
^ Tap < or > until Settings C is Language F
highlighted. Confirm with OK. Time of day
22
Settings
23
Settings
24
Settings
Switch off at Coffee jug (dispensing several
A specific time of day can be set to turn servings, one directly after
the coffee system off. another)
^ Use < or > to select "Switch off at", With this function, you can dispense up
confirm with OK. to eight servings of coffee, one immedi-
ately after another (max. 1 qt / 1 l). The
^ Tap < or > to set the hours. Confirm brewing process will run automatically
with OK. Repeat to set the minutes. for all servings.
The machine will turn on each day at ^ In the main menu, select item
the specified time when you have "Settings F", then tap ok.
activated the timer (see "Activate").
Settings
If the automatic rinse feature is Coffee jug
turned on, and the machine has Prog. the amount
been used to prepare a beverage, it
^ Tap the right arrow until "Coffee jug"
will always run a brief rinse cycle
is highlighted, then tap OK.
before turning off.
^ Using the arrows to select the
Activate number of servings you wish to be
dispensed (3 to 8) and confirm with
^ Use < or > to select "Activate",
OK.
confirm with OK.
^ Place the desired container under the
The program items "Switch on at" and
main dispenser and follow the
"Switch off at" are displayed.
instructions on the display.
Activate Each cup of coffee will be individually
8 Switch on at ground, brewed, and dispensed. The
8 Switch off at display will report the progress made.
You can interrupt the process at any
^ Use < or > to select the program
time by tapping the OK key (Stop).
item(s) you wish to activate.
^ When the display reads process
Tap OK to activate (select the check
completed confirm with OK.
box) or deactivate (clear the check
box) the desired option.
^ Use < or > to select "Accept", confirm
with OK.
^ Use < or > to select "Back A",
confirm with OK.
25
Settings
26
Settings
27
Settings
28
Settings
29
Settings
30
Settings
You can program four hardness levels Display
on the machine:
The display contrast and brightness
– Level 1 (soft): can be adjusted.
0 - 3 gr/gal (0 - 3 °d)
^ Select "Settings F" , confirm with OK.
– Level 2 (moderately hard):
4 - 7 gr/gal (4 - 7 °d) Settings
Display
– Level 3 (hard): Volume
7 - 15 gr/gal (7 - 14 °d)
^ Tap < or > until "Display" is
– Level 4 (very hard): highlighted, confirm with OK.
15 - 22 gr/gal (14 - 21 °d)
^ Tap < or > to select "Contrast" or
^ Select "Settings F", confirm with OK. "Brightness", confirm with OK.
Settings ^ Tap < or > to adjust the contrast
Water hardness lower or higher or make the display
Display brighter or darker.
^ Tap < or > until "Water hardness" is ^ Tap OK to save the setting.
highlighted, confirm with OK.
^ Tap < or > to program the water
hardness level, confirm with OK.
The selected water hardness level is
now saved.
31
Settings
32
Settings
Settings
– Time display (On for 60 seconds),
Factory default
Time format (24 h),
Back #
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
^ Tap < or > until "Factory default" is Timer - Switch off at (12:00),
highlighted, confirm with OK. ("Switch on at" and "Switch off at"
Two options are now available: both deactivated)
– Coffee jug (3 cups)
User profiles
– Lighting: Brightness (medium)
Selecting "User profiles" deletes all user
profiles that you have entered, leaving – Safety: System lock (Off)
only the default (standard) profile. – Water hardness (very hard 4)
^ Under "User profiles", select "Reset", – Display: Contrast (medium),
confirm with OK. Brightness (maximum)
The user profiles are deleted. – Volume: Buzzer tones and keypad
tone (both at maximum setting)
All settings
– User profile: Revert (when machine is
Selecting "All settings" restores all turned on)
settings back to the factory default.
^ Under "All settings", select "Reset",
confirm with OK. If "Reset" is selected by accident,
All settings are now reset to the default. turn the machine off, the settings will
not be reset.
33
Setting the serving sizes
The flavor of a coffee beverage Setting serving sizes of
depends not only on the type of coffee, espresso, coffee, hot milk and
but also on the quantity of water used. milk froth using OK
Not every espresso or cappuccino cup
is the same size. Use this feature to set ^ Place the desired cup under the main
the volume of water to suit your taste dispensers.
and cup sizes. ^ Select the beverage type.
For beverages with milk the ^ Press and hold OK until the display
proportions of espresso, milk, and froth reads "Prog. the amount".
have an important impact on flavor. You
can set the appliance to suit your ^ Tap OK again once the cup is filled
preferences for cappuccino and latte to your desire. "Save" appears in the
macchiato. display.
To program serving sizes, you can The programmed volume of water or
either press and hold the OK button, or milk will now be dispensed each time
via the "Settings" option. that particular drink is selected.
When a user profile is activated, the Once the maximum water or milk
serving size is set for that particular volume is reached, the appliance
profile only. automatically stops the water
supply. The maximum fill amount for
If you want to set the serving size for each beverage is then stored.
all profiles, select the "Standard"
user profile. If the water tank or milk container
becomes empty during portion
programming, the process is
canceled and the size is not stored.
34
Setting the serving sizes
^ Press and hold OK until the display ^ Repeat this process for the other
shows the options for Cappuccino components you have chosen for this
(Milk froth, Espresso) or Latte type of coffee.
Macchiato (Hot milk, Milk froth, Each time the drink is prepared it will
Espresso). contain the programmed amount of
coffee, milk, etc.
Latte Macchiato
8 Hot milk
8 Milk froth
35
Setting the serving sizes
Setting the serving size for hot Setting serving sizes via
water "Settings"
^ Place the desired cup under the hot ^ Select "Settings F", confirm with OK.
water dispenser.
Settings
^ Tap - until the display reads "Prog. Prog. the amount
the amount". Amount of coffee
^ Tap - again once the cup is filled as ^ Tap < or > until "Prog. the amount" is
desired and "Save" appears in the highlighted, confirm with OK.
display.
^ Use < or > to select the beverage
Each time the hot water is prepared the you wish to set a serving size for.
programmed amount will be dispensed.
^ Select "Start", confirm with OK.
Proceed as you would for programming
using OK or - .
36
User profiles
If the appliance is used by several The following options appear only if you
people with different preferences, you have already created a user profile:
can save up to 9 individual user
– Change user profile to change a
profiles.
user profile.
The following settings can be
programmed for each user profile: – Delete user profile to delete a user
profile.
– Serving size for coffee beverages
and hot water – Revert: The appliance can be set so
that it automatically reverts to the
– Serving size of milk for beverages
Standard user profile or continues to
with milk
use the most recently selected user
– Amount of coffee profile set.
– Water temperature
Selecting a user profile
– Pre-brew
^ Use < or > to select the user profile
See "Setting the serving sizes" and you wish to use, confirm with OK.
"Settings".
Espresso
+ John
User profile
q r H I J L n m C
q r H I J L n m C
To show that a user has been selected,
^ Tap < or > until "User profile" is the upper display line shows a large
highlighted, confirm with OK. user n symbol.
You can now either:
– Select user profile from the profiles
already set.
– Create user profile to enter a new
user profile.
37
User profiles
You will see the selected characters in Continue as you would for "Creating a
the top line of the display. user profile".
38
User profiles
Manually
The appliance retains the selected user
profile until another profile is selected.
^ Use < or > to select "Manually",
confirm with OK.
After dispensing
After each drink prepared, the
appliance automatically reverts back to
the standard user profile.
^ Use < or > to select "After each use",
confirm with OK.
When switched on
Each time the appliance is turned on,
the standard user profile will
automatically be selected, no matter
which user profile was set before it was
last turned off.
^ Use < or > to select "When switched
on", confirm with OK.
39
Cleaning and care
Overview
40
Cleaning and care
Rinsing the system
Allow the coffee system to cool
Before switching your machine off for
before cleaning. Danger of burns!
an extended period of time, you should
clean the supply lines, the brew unit,
Do not clean the unit with a steam
and the main dispenser.
cleaner.
If you have turned off the automatic
rinse feature (see "Settings - Automatic
Never use cleaners containing
rinsing"), the lines will need to be rinsed
chlorides, sand, soda or scouring
manually. When performing a manual
agents. These will damage the
rinse cycle, it is recommended that you
surface.
place the small cleaning container
under the main dispenser.
To avoid mold, growth and odors it is
important to clean the machine
regularly. Maintenance
All removable parts are q r H I J L n m C
dishwasher-safe, except the following: ^ Tap < or > until "Maintenance m" is
– Brew unit highlighted, confirm with OK.
– Bean container ^ Select "Rinse the system", confirm
with OK.
– Stainless-steel milk container and lid
^ Select "Start", confirm with OK.
– Main dispenser cover
When the main menu reappears in the
When these parts are cleaned in the display, the lines have been rinsed. The
dishwasher they may become appliance can now be turned off.
discolored by food residues such as
tomatoes or their surface coating may
become damaged.
41
Cleaning and care
42
Cleaning and care
Cleaning clogged milk pipework
If no milk, just steam, comes out of the
main dispenser, the milk pipework in
the appliance door may be clogged.
^ Take the lid off the main dispenser.
Pull out the nozzles of the main
dispenser (see "Main dispenser").
To rinse the pipework in the lid of the ^ Open the appliance door.
stainless-steel milk container, fill the
large cleaning container to the ^ Remove the stainless steel milk
"max." mark with lukewarm water to container and clean it, particularly the
dissolve the cleaning agent. lid (see "Stainless steel milk
Fit the lid of the stainless-steel milk container").
container into place on the large
cleaning container.
Hang the cleaning container in the
appliance where the milk container
would normally sit.
43
Cleaning and care
^ Remove the cover with the milk ^ Insert the brush into the milk hoses
pipework. Clean the whole part in the one after the other from below. Push
dishwasher without taking it apart. the brush back and forth to the end
If there are milk residues in the milk until there is no more no milk residue
pipework you can clean them with the in the hoses.
cleaning brush provided. To do this, Reassemble the milk pipework as
take the cover and the milk pipework follows:
apart as follows:
44
Cleaning and care
Stainless-steel milk container
The stainless-steel milk container
and lid must be cleaned by hand
with hot water.
45
Cleaning and care
Main dispenser
46
Cleaning and care
47
Cleaning and care
48
Cleaning and care
49
Cleaning and care
Brew unit
Manually clean the brew unit weekly.
The movable parts are lubricated
and the cap will get damaged in the
dishwasher. Do not use a
dishwasher this will cause damage.
50
Cleaning and care
Cleaning/Degreasing the brew unit
Depending on the oil content of the
Maintenance
coffee, the brew unit can clog. Clean
the brew unit approx. every 200 cups q r H I J L n m C
with the enclosed detergent tablets. ^ Tap < or > until "Maintenance m" is
They are specially developed for the highlighted, confirm with OK.
coffee maker to optimize the
degreasing. The cleaning tablets can ^ Select "Clean brew unit", confirm with
be purchased from Miele. OK.
^ Select "Start", confirm with OK.
As a reminder the display shows
"Please run cleaning program" after ^ Follow the instructions in the display.
200 cups and then until the machine
is cleaned.
The cleaning process takes about 6 To avoid having to empty the drip
minutes. tray too frequently, place the small
cleaning container beneath the main
dispenser.
The inside of the machine is also
rinsed, therefore you will still have to
empty the drip tray during the
cleaning process.
51
Cleaning and care
When the display prompts you to
Please drop the cleaning tablet in the Only use a slightly damp sponge
ground coffee funnel. when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
52
Descaling the appliance
The coffee system must be descaled
regularly. The appliance will display a Only use the enclosed descaling
reminder message to descale and will tablets for descaling. They are
eventually lock if not descaled. specially developed for the coffee
system to optimize the descaling.
The display will show "Please descale
The descaling tablets can be
the coffee system. Remaining number
purchased from Miele.
of servings: 50". This message will now
Other agents may damage the
appear after each preparation.
machine and affect the taste of
^ Tap OK to acknowledge this coffee and hot water.
message. The machine could also be
damaged.
If the counter has elapsed to 0, the
Use the correct proportion of
appliance will be locked, and the
descaling agent in solution to
display reads: Descaling program
prevent damage to the machine.
must be carried out.
^ Tap OK to start the descaling cycle Use the supplied cleaning
immediately. containers to protect the appliance
Descaling takes about 20 minutes. If front from the descaling agent.
you want to continue at a later point in Clean up any descaling spills im-
time, turn the unit off. The appliance mediately to avoid damage to the
can only be used again once descaling appliance front.
is performed.
Thoroughly clean the water tank and
the drip tray of descaling residues.
53
Descaling the appliance
The display prompts the user through During the descaling cycle, the
the single steps of the descaling descaling agent-water solution will run
process. Follow the prompts. out of the hot water spout and the main
dispenser. This will be followed by a
If the descaling is started while the pause to allow the solution to dissolve
machine is still hot, the appliance the internal mineral buildup, after which
will cool down for 10 minutes before more descaling solution with be
the descaling begins. released from the spouts. This process
will repeat itself until the cycle is
The descaling process cannot be finished.
canceled once "OK" is selected. The ^ When the display prompts you to
process now needs to be Add fresh water to tank, rinse the
completed. This is a safety feature to tank thoroughly with clear water (all
ensure the process will be traces of descaling residue must be
completed. It is important for best removed) and fill it with clean
results and the longevity of the drinking water up to the k mark.
machine.
During rinsing, water will run out of the
dispensing spouts. Because the inside
of the machine is also rinsed out, you
must empty the drip tray in the final
step.
^ When the display shows Prog.
finished, tap OK.
The appliance is now fully descaled
and ready for use.
54
Frequently asked questions
The light does not illuminate when the appliance is turned on.
Possible fault Solution
Is the lighting turned off? – See "Settings - Lighting".
If not, the lighting is defective.
Contact Miele.
The display remains dark.
Possible fault Solution
The unit has no power. – The main switch is turned off.
– The machine is not plugged in.
– Check that the fuse had not blown or
is defective. If the fuse has blown
contact Miele's Technical Service
Department.
The unit suddenly turns off.
Possible fault Solution
– Is the machine programmed to – The machine goes into standby
switch off after a programmed time? mode when not used for a
programmed time. See "Settings -
Timer - Switching off after".
– There could be pebbles within the – Call Miele's Technical Service
coffee beans. The unit shuts off after Department.
20 secs. to avoid damage.
– Is the machine plugged in? – Plug in the machine.
The light turns off suddenly.
The light turns off automatically when the machine has not been used for
15 minutes. See "Settings - Lighting".
55
Frequently asked questions
What if the machine does not switch on, even though the "Switch on at"
timer setting is activated?
Possible fault Solution
The System Lock is activated. See "Settings - System Lock".
The display messages are difficult to read.
Possible fault Solution
The contrast or brightness of the Adjust the display contrast / brightness.
displays are too low / high. See "Settings - Display".
No milk or milk froth comes out of the main dispenser.
Possible fault Solution
The dispenser is clogged. See "Cleaning and Care".
The display prompts me to fill or insert the stainless steel milk container
even though the container has already been filled and inserted
Possible fault Solution
The container needs to be See "Cleaning and Care".
cleaned.
The grinding sounds louder than usual.
Possible fault Solution
There could be pebbles within – Turn off the unit immediately.
the coffee beans. – Contact the Miele's Tech. Service if the
bean container is not empty. Otherwise fill
the container with fresh beans.
The coffee/espresso flows too fast into the cup.
Possible fault Solution
The grind control is set too Set the grind control slide to a finer grind.
coarse.
The coffee/espresso flows too slow into the cup.
Possible fault Solution
The grind control is set too fine. Set the grind control slide to a coarser grind.
56
Frequently asked questions
57
Frequently asked questions
58
Frequently asked questions
59
Frequently asked questions
60
Frequently asked questions
61
Frequently asked questions
The message "Fault - 73" appears in
the display.
The brew unit cannot reset to the
correct position.
^ Take out and clean the brew unit.
See "Cleaning and Care - Brew unit".
62
After sales service
In the event of a fault which you cannot MieleCare
easily fix yourself, please contact the
(USA only)
Miele Technical Service Department at
the contact information on the back of MieleCare, our Extended Service
this booklet. Contract program, gives you the
assurance of knowing that your
When contacting the Technical Service
appliance investment is covered by
Department, please quote the model
5 years of worry free ownership.
and serial number of your appliance
MieleCare is the only Extended Service
given on the data plate inside the
Contract in the industry that guarantees
appliance.
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
http://miele.com/mielecare
63
64
Installation instructions
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Caring for the environment
66
Electrical connection
WARNING:
Make sure that the power to the THIS APPLIANCE MUST BE
machine is OFF before installing or GROUNDED
performing maintenance or repairs.
Important
All electrical work should be
The coffee system comes equipped
performed by a qualified electrician
with a 6 ft (1.8 m) power cord with a
in strict accordance with national
NEMA 5-15P molded plug for
and local safety regulations.
connection to a 120 V, 15 A, 60 Hz
Installation, repairs and other work
power supply.
by unqualified persons could be
dangerous.
67
Installation
Installation options
The coffee system is designed to be built into cabinetry.
68
Installation
Installation
Make sure power is not supplied to
the appliance while installation or
maintenance work is performed.
Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse. The coffee
system must be installed into
cabinetry before being used. ^ Unscrew the height adjustable feet
This unit should only be used in on the underside of the machine
room temperatures ranging between about 1/16" (2 mm).
59 °F and 140 °F.
^ Push the appliance all the way back
To align the appliance door flush with into the cabinet and center it. If
the kitchen cabinetry, there must be a necessary level the unit with the four
sealing strip around the installation height adjustable feet.
recess; otherwise, a sealing strip must
be put in place around the appliance. The feet can be turned out up to 3/8"
(10 mm).
69
Installation
Adjusting the door hinges
The door hinges can be adjusted if the
door cannot be opened easily.
70
71
Alteration rights reserved / 0710 M.-Nr. 07 816 880 / 00
CVA 4062, CVA 4068
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.