You are on page 1of 1

vii

LIST OF FIGURES

Figure Page
2.1. Joint Box or Tee System 6
2.2. Loop-in or Looping system 7
2.3. Cleat Wiring System 9
2.4. Wooden Casing and Capping System 10
2.5. TRS or CTRS Wiring System 12
2.6. Lead Sheathed Wiring System 13
2.7. Conduit Wiring System 15
3.1. Typical Rotary Power Source UPS 34
3.2. Typical Static Power Source UPS 35
3.3. Block Diagram of On-line UPS 36
3.4. (a) Continuous System (Normal Mode Operation) 36
(b) Continuous System (Emergency Mode Operation) 36
(c) Continuous System (Recovery Mode Operation) 37
3.5. Reverse Transfer System 37
3.6. Block Diagram of Off-line UPS 38
3.7. (a) Forward Transfer System (Normal Mode Operation) 39
(b) Forward Transfer System (Emergency Mode Operation) 39
(c) Forward Transfer System (Recovery Mode Operation) 39
4.1. Circuit Breaker 47
4.2. Single Line Diagram for MDB-ATS 54
4.3. Single Line Diagram for DB-UPS 55
4.4. Automatic Transfer Switch 58
4.5. ATS Controller 59
4.6. Control Circuit Diagram of ATS Controller 59
5.1. Main Control Panel 64
5.2. Single Line Diagram of Main Panel 64

You might also like