0% found this document useful (0 votes)
50 views2 pages

MSHA Approved Flame-Resistant Splice Kits

This document from the Mine Safety and Health Administration lists several cable splice kits that have been accepted for use in underground mines. It provides the manufacturer names and contact information for splice kits that have been tested and approved under regulations for flame-resistant materials. The originating office is provided for questions about the testing and approval of these cable splice kits.

Uploaded by

Juan Adrianzen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
50 views2 pages

MSHA Approved Flame-Resistant Splice Kits

This document from the Mine Safety and Health Administration lists several cable splice kits that have been accepted for use in underground mines. It provides the manufacturer names and contact information for splice kits that have been tested and approved under regulations for flame-resistant materials. The originating office is provided for questions about the testing and approval of these cable splice kits.

Uploaded by

Juan Adrianzen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

United States Department of Labor

MSHA

Mine Safety and Health Administration


SPLICE KITS

ACCEPTED BY MSHA UNDER CODE OF FEDERAL REGULATIONS

TITLE 30, PART 18, SECTION 18.64


and
Part 7, Subpart K, SECTION 7.407(*)

The splice kits applicable to this listing


were tested and accepted as flame-resistant under
the Code of Federal Regulations, Title 30, Part
18, and Part 7, Subpart K, Section 7.408 (*).
These flame-resistant cable splice kits are accepted
for use in underground mines. It is recommended that
the manufacturer be contacted to determine the
availability and status of any cable splice kit
listed herein.

ORIGINATING OFFICE:

Mine Safety and Health Administration


Approval and Certification Center
Materials and Explosion Testing Branch
765 Technology Drive
Triadelphia, West Virginia 26059

Last Updated 05/09/18


3

The Goodyear Tire and Rubber Company 149


1144 East Market Street
Akron, Ohio 44316
(216) 796-4943

Central States Industries, Inc. 150 *


200 Neal Street (Retired ext 1) 7K-150145-MSHA*
Beckley, WV 25801 7K-150149-MSHA*
(304) 255-7460 (Retired ext 0,1,2)7K-150153-MSHA*
7K-150156-MSHA*
07-KA040007-MSHA*
7K-150001-MSHA*
07-KA080023-MSHA*
07-KA080024-MSHA*
07-KA090025-MSHA*

The Zippertubing Company 151


13000 South Broadway
Los Angeles, CA 90061
(213) 321-3901

Plymouth Rubber Company, Inc. 153*


104 Revere Street 7K-SK-153082-MSHA*
Canton, MA 02021
(412) 262-3099
(Name changed to Plymouth Rubber Europa North America (PRENA)

Electronized Chemical Company 154


Current Address Unavailable

Sigmaform Corporation 156


Current Address Unavailable

MacProducts, Inc. 157


Current Address Unavailable

AMP Special Industries 158


Current Address Unavailable

Communication Technology Corporation 160


Current Address Unavailable

A. J. Noce and Associates, Inc. 161


Current Address Unavailable

AMP, Incorporated 163


2100 Paxton Street
Harrisburg, PA 17105
(717) 564-0100

R & T Enterprises 167


Last Updated 05/09/18

You might also like