Professional Documents
Culture Documents
RXPSU Brochure PDF
RXPSU Brochure PDF
ABB is a global leader in Power and Automation The product offering covers a wide spectrum of
technologies that enable utility and industry technologies across the entire voltage range
customers to improve performance while lowering including indoor and outdoor circuit breakers, air
environmental impact. The ABB Group of and gas insulated switchgear, disconnectors,
companies operates in around 100 countries and capacitor banks, reactive power compensators,
employs over 1,05,000 people. power transformers, distribution transformers,
instrument transformers, Compact Secondary
In India, ABB serves customers with the complete
Substations (CSS) and Ring Main Units (RMU).
range of power and automation technologies. The
company has a vast installed base, extensive
manufacturing facilities and a countrywide marketing
and service presence. Advantage ABB
As a part of its Power Technologies offering, ABB 120 years of technology and innovation
serves electric, gas and water utilities as well as
industrial and commercial customers with a wide range
Unparalleled domain competence
of products, systems and services for power Global experience
generation, transmission and distribution. ABB’s
Complete solution capabilities
system offering ranges from Electrical Balance of Plant
(EBOP) for power plants, bulk power transmission, Large installed base
turnkey substations and complete electrification to Environment-friendly technologies
utility automation and power distribution.
2 ABB
Bistable relay types RXPSU6n, RXPSU14n
RXPSU14n is with mechanical flag type indicator The contacts are arranged symmetrically on both
6 / 14 contacts with double interruption sides of the relay coil and armature assembly in two
stacks. They are easily accessible and the
Contact configuration can be changed with ease
conversion from N/C to N/O contacts and vice versa
Wide range of voltage and contact configuration
is simple. The maximum rated voltage is 250V DC or
AC and the material used is hard silver.
Application The following definitions apply for reset and operate
condition. Reset condition - Armature assembly
For remote and automatic controls there is often a
position is away from the base i.e. the upper system
need for contactors which have two stable contact
has been pulsed and lower system is ready to be
positions, even in the dead state. This requirement is
pulsed. The flag strips are invisible i.e. white during
fulfilled by changeover contactors type RXPSU...n.
this condition. Operate condition - Armature
The application of alternate control pulses to the
assembly position is closer to the base i.e. the
coils cause the contacts to change from the one
lower system has been pulsed and upper system is
state to the other. If the supply is interrupted, the
ready to be pulsed. The flag strips are visible i.e. red
contacts remain in their previous position, even when
during this condition.
the voltage is restored.
A transparent, incombustible cover with a gasket
Design and principle
protects the contacts against dirt. The terminals of
The bistable relays in the COMBIFLEX system, type the contact stacks themselves to permit two wires
RXPSU6n and RXPSU14n are composed of the of 1.5mm diameter maximum to be secured.
same constructional elements as the established Changeover relays must always be mounted with
contactors type P8n. Two magnet systems are the contact post horizontal, that is with the base on
interconnected by a pivoted element. In the type a vertical surface. The plug-in relay module occupies
RXPSU6n with 6 free contacts, only one system two seats (2U 12C).
Technical data
Energizing quantities, rated values and limits
Rated voltage UN 24, 30, 48, 110, 125, 220, 250 V DC
Operative voltage range +10%, -20%
Permitted ambient temperature range 0oC to +55oC
Pick-up voltage (%UN) < 80%
Pick-up time at UN (typical) 20-40 m sec
Maximum power consumption at the instant of 65 W
switching
Mechanical durability tested acc to IEC 255 1 x 106 switching operations, 200 Draw-out /
Plug-in operations
Weight
Type RXPSU6n 1.3 Kg. approx.
Type RXPSU14n 1.5 Kg. approx.
Contact data
Contact configuration
Type RXPSU14n 7N/O+7N/C, 8N/O+6N/C, 9N/O+5N/C, 10N/O+4N/C,
11N/O+3N/C, 12N/O+2N/C, 13N/O+ 1N/C or 14NO
Type RXPSU6n 3N/O+3N/C, 4N/O+2N/C, 5N/O+ 1N/C or 6NO
ABB 3
Technical data
Contacts 1 2 in 1 2 in 1 2 in 1 2 in 2 in
Dimensions
4 ABB
References Connection and installation components in COMBIFLEX 1MRK 513 003-BEN
Relay mounting systems 1MRK 514 001-BEN
ABB 5
Ordering details
Refer type designation for selection and mark ( ) appropriate boxes
Type : RXPSU6n Qty.............. Item no.........
RXPSU6n/05/2006/01-1500
ABB Limited 1MDB08205-YN 06-2006
Regional Marketing Offices:
Distribution Automation
Maneja, West South
North
Vadodara 390 013, India.
Tel: +91 265 2604384/5/6 No.14, Mathura Road ABB House Embassy Star, 1st Floor
+91 265 2604397 P.O. Amar Nagar Dr. S B Path No. 8, Palace Road
Fax: +91 265 2638922 Ballard Estate Vasanth Nagar
Faridabad 121 003
E-mail: aicds@in.abb.com
Tel: +91 129 2275592, Mumbai 400 038 Bangalore 560 052
2279627, 5049000 Tel: +91 22 56318231 – 39 Tel: +91 80 22949779
Fax: +91 129 2279692/5019 Fax: +91 22 56318276/77 Fax: +91 80 22949808