CERTIFICATE OF INSPECTION
Part Name Square Washer
Sampling Spec : ASME/ANSI B18.18.2M
Sampling Size 5 Pcs
Finished Plain
Test Description
Quantity Size Specification Thread ‘Material
16pcs M10 ASTM. 2 S45C
Dimensional Inspection
Characteristics Specifications Results Acc. Re
Dimension ‘AS PER ORDER Good 6 0
Thread GO (Gauge) = = . =
[Thread NO GO (GauQe = * =
Mechanical Properties
Characteristics Test Method Requirement ‘Test Resulis Aco. Re
Proof load ASTM = - -
Hardness ASTM. 38-45HRC 41,8-43,2HRC 8 0
Remarks
1. We certify that the material supplied has been tested by us as described above and
complies with the order and technicalspecification indicated.
2. This report must not be reproduced except in full
3. Test results relate only to the items tested.
eas Goes
QC MANAGER
Page: 1/1