Impulse
Voltage Test
System
== ayD> usc Voltage Test System
‘2400KV 260k4 Impulse Votage Test System
Brief Introduction
CIDY series impulse voltage test system simulates lightening impulse, lightening chopping impulse and switching
impulse voltage waveforms with a wide range of voltage and energy, to test on high voltage power units. In
coordination of steep wave device the system can test on insulators or insulator strings. The impulse voltage test
system can be used as impulse current test system with a little changes, to test on surge arrestors for residual
voltage test. The system can not only be used in industry, but also in research and training,
The impulse voltage ranges from 100KV to 7200kV
Applications
‘System can be used to test:
power transformers
cables
arresters (impulse current test)
generators, motors
insulators
bushings
instrument transformers
capacitors
cther insulation materials
scientific research and educationPetes
peers
eens
figuration, to satis
eee
ere
rol system, user friendly operation interface
Bei
canbe used in combination with AC or DC test system
‘System is composed by impulse voltage generator, charging unit, damping voltage divider, chopping device, steep
‘wave device, control and measurement system, wave-shaping units and isolating impedance.
‘The impulse voltage generator is parallel charged through the charging unit. Trigger the ignition device, and all
sphere gaps of the generator are triggered in synchronization and discharge in series. The voltage goes through
divider and is displayed on control screen.
ommuniatongonssauement
2 ehaging uit Sstecpwave device Beltngineedance 11 conta syst
3 mul vine generator vole dider—Seambiation tet stam 12. masrroment te
"Note:4. tem 8 & 9 only for combined test on switchgears or cables.
2.Diferent color e used for etterent testing requirements. Green ones are the base standard configuration,
System Components Options
controlled silicon voltage regulation unit resistors for special wave shaping
charging unit Owave-shaping resistors and inductors for
impulse voltage generator ‘esidual voltage measurement of arestors
chopping device (for transformer test) other wave-shaping elements
steep wave device (for insulator test) air cushion, wheels for base
voltage divider other parts may needed
control system
‘measurement systemTechnical Specifications
Waveforms : Standard lighting impulse: 1.2230%/50#20%US, surge at peak < 5%;
Standard switching impuls 250820%/2500:60%4S
Front time of lighting impulke wave <15uS
‘Min output voltage: 210%Un
Charging voltage instability: <£1%
Synchronization range: 220%
Syiichtonous discharge malfunction: <2%
Ignition range: 10%~ 100%
Running tim discontinuous running (charge and discharge every 300s) when 270%Un,
continuous running (charge and discharge every 120s) when <70% Un
Efficiency of generator: lightening wave (no-load) 290 %
2~5us
CJDY-E
‘Type E generator uses single insulating tube to prop the generator, suspended with two single-bushing capacitors.
Stage voltage is 100KV. The generator is composed by capacitors, front-wave and tail-wave resistors and discharge
gaps. The discharge gaps are housed in insulating tube with ventilation. Clean and dry air keeps flowing through
the gaps to improve the synchronous performance even under heavy conditions. The generator and charging unit
are fixed on separate moveable bases connected with corona-free wires.
Loon)
come 75/500 os as Ts 1600
COVEISO sos 1 033s 0 =uoR ao
oovez25/300 as oso as 1960
cove 1740 os om 200
vez 004 2 020 20 am 210 | 1%
ove 3140 as 0350 nm
cove. 15/600 05 ons as 2200
COVES sms 1 ous 30 20 (ERD 1500
croves/600 0 fA 02 425002000 20
‘cove 21800 as cos 0 200
coecy0 omg 1 om xo 0
(Cove e200 as ons 6 3500
covez500 os cass 200
CoNEASSOO 9m 8 a an oo a 0
coves smn as oss Py
‘core s0200 0s eons 30 400
Coreen 1am a 1 oss so so 40300
‘core san200 as om 9 eoCJDY-G
‘Type G generator uses insulating tube to prop double-bushing capacitors. Stage voltage is 100kV. The generator is.
‘composed by capacitors, front-wave and tail-wave resistors and discharge gaps. All wave-shaping units are bt
while the discharge gaps are exposed, The generator and charging unit are fixed on separate moveable bases. Type
G generator is suitable for relative low voltage and low capacity loading objects.
“o0N6-75/800| as ower 78 1590
Coreasam 303 1 om as a a)
1016225730 as 05 as 160
‘pre 0/00 os ous 10 m0
ciovezae og ¥ 02 200 a0)
‘ore 700 a 037550 180
copieasrec0 as 083s as 2000
ciovesorcn emg 1 owsr 30 somo 801500
core-sc0 100 1s 02545 1mm 1680 zm
‘ove eco os Doses 0 2470
‘oprGa00 ew 1 0225 se 28505 2m
cioie-a
‘oo soso seo 2100 20 so ‘00 30
Dor soan00 0 ‘eo ou 4
‘DoFs0y00 2600 00700 3000 000 00 e100 700
oF 20ma00 1400 7005 21900700
DoF s0240 240, 00 00 5 ‘oro
DoF 043000 300 ‘co 5000 10205 21m 100
‘oF 30360 3600 1855 2390050
or aovooo oo ‘co. ‘ooo ass e201
‘DoF s0A0 ao 675 250) asso
Dor soon 00 7100 7200 0800 500 1800
005300720 790 50 00 23500 ‘oea00 200Chopping device
‘chops lightening impulse front wave or tail wave, Gap distance is adjusted via
motor controlled by operation device. Trigger signals are isolated by optical
fiber, Delay is realized by hardware together with software.
=
‘pai8.300
00 3 1080
a8-100 = ‘ mo
pgi.con 0 6 0 1300 atcoaaTAN
5-20 oo 5 mf
‘ogi.soo soo 8 sss 0
que 120 6 say a io
Qs-160 100 8 00 00200
aie 800 1200 ° woo mito
pQ82400 200 2 20 ao 20
ae-3o00 00 5 cre)
‘ogi 3500 seco 6 ose
98-100 ‘co 2 ie tam
a-4e00 0 ES seas
DB-Series Steep Wave Test Device
ARETE vit neering se a vin nd lage cides Th scr
See RTT eT veringcapactor spies gopceciea vs and fee
By adjusting charging vologe el the genrtr ara regubtiogdstnceof he sleep wave sphere gap, the users
abies conc font une of muse woage
The sepeing capectoris able thstandectage of 60H, with expactane of 30pF
The spec oup satan fr steopee tester pole ltrs deur The forme test reques
eopbes es then 150040 whe te alert ques a max steps of 2500-40000 Fue
Resistive voltage divider takes advantage of small dimension and low impedance in order to get fast response. The
divider is oilimmersed. Same as steep wave sphere gap, the resistive voltage divider is also fixed on moveable
base.
‘Specifications as below:
Sid potmerinuision 560 Appoe2Stohn AperouORotm Taslins ODS BH