GENERAL. TOLERANCES (PRESSINGXO 0008-1)
General HES Office, RAD Tochish
[onoTa wovin oa’ amaRBS iro,
HESS a
Domi) _DQCUMENTG@NERAL TOLERANCES (PRESSING) |
tabli ETRONICO
iMPRESSO PARA CONSULTA
1, SCORMMEATION RAS GnStmanarrosoU Ese DE RODEG
‘This: ‘specifies the dimensional and angular tolerances that apply to metal-pressed
products when no symbol or numerical indication is given on drawings.
2. DIMENSIONAL TOLERANCES
2.1 Dimensional Tolerances excluding R dimensions (tolerance or thickness not included)
7 ‘Unit:
uk ‘wrt | aver 100 ‘aver 300
‘Nouinal Dinersion | 30 Max. cae Toe se 1000
Gade SO
1 Max. f+ 0.2 +03 +04 £06
oer
[mictaess x 03|03|* 04 [+07 [+06 [+10 [eos | +1:
waa [293 £04 |+07 |+ 06 |+10 |s 08 | 15
over 32
£0: + +
me [eos os £08 Lo.
‘Remarks: When one side tolerance is required, indicate clearly as shawn below.
Example 1
Example 2 frGENERAL TOLERANCES (PRESS!
NCD GOOB~71)
rnsianal Tolerances for R Dimensions
Nonna ee eT
Dinan _|_1° MP 1030 1 100
Ge prep te 2
Temas [E05 [E10 [ea3 [as [Es [10
23 Angular Tolerances
Grade T z
‘Tolerance | =P aM | =a
[Rimes aaded |
[ xcref
Remarks: Bending angle and drawing angie are included.
[apatiabie Sandal
[eRe