Professional Documents
Culture Documents
2
2008
Utilisation, safety, quality and guarantee
regarding CROSINOX Products
CROSINOX is the product name of a range of stainless steel The seller/manufacturer may assist by providing documenta-
fittings. tion – possibly for payment – regarding a specific installation
concept based on specifically stated prerequisites.
Most fittings are designed to be attached using screws, but
some fittings are also weldable. In a few instances, a product has been certified for a specific
utilisation by the seller/manufacturer, but it has not been pos-
The CROSINOX range consists of two lines: sible for the seller/manufacturer to have the product certified
AISI 316 and AISI 304 for every type of possible utilisation of the product.
Both lines (304 and 316) consist of high-quality products conti- It is particularly noted that to the extent the CROSINOX
nually subjected to our internal quality assurance procedure to products are used in connection with types of guard rails or
ensure they meet our own standards and norms. handrails, the utilisation must be implemented in consideration
of the design of the building/guard rail/handrail to satisfactorily
The standard finish for our products is grit 240. ensure human safety.
NONE of the products in either line is maintenance free. The The seller/manufacturer refers to the general terms and condi-
company does NOT guarantee the durability of the finish tions that apply to public construction, including that the mini-
but refers in this respect to the product data sheet from the mum height of guard or handrails must be 1.0 metre, and that
FORCE Institute concerning “vedligeholdelse af rustfrit” (stain- minimum height of guard rails or handrails for stairs and ramps
less steel maintenance). must be 0.8 metre and at least 0.9 metre over stair landings.
In most instances, CROSINOX products are included as an The buyer is advised to contact the local building authorities
ancillary product for the buyer’s own finished product, as the to clarify whether special rules are in force for the area in que-
buyer is free to assemble or combine CROSINOX products, stion regarding the design of guard rails and handrails.
also with other components, to make the buyer’s finished
product. If a CROSINOX product is used in making guard rails or
handrails, the buyer is advised to contact the local building
For this reason, the seller/manufacturer disclaims all and any authorities to ensure that the final use of the product meets
liability for the buyer’s use of CROSINOX products, as it is with the approval of the local building authorities.
the individual technician, project manager or buyer who is
responsible for calculating, assessing or planning the utilisation CROSINOX will gladly provide advice relating to product use
of the CROSINOX product in the end product. at all times.
2
3
4
Tubes and bars
Tube with 4no predrilled holes * Tube with 5no predrilled holes * Tube with 6no predrilled holes *
Pre-drilled tube to suit cross bar holders Pre-drilled tube to suit cross bar holders Pre-drilled tube to suit cross bar holders
Tube with 2no predrilled holes Tube with 4no predrilled holes Tube with 2no predrilled holes
single side 90° in line
Pre-drilled tube to suit cross bar holders Pre-drilled tube to suit cross bar holders Pre-drilled tube to suit cross bar holders
5
Glass clamp
tuellen Rich
ak tl
n
AV
in
prüft nach de
ie
tuellen Rich
n
ak
TR .c n tl
AV
in
prüft nach de
t
ie
Ka 6.
n
TR .c
ge
t
3.
Ka 6.
tz
Absa
ge
3
3.
t z
Absa
tuellen Rich
tuellen Rich ak tl
ak n
tl
AV
in
prüft nach de
n
ie
AV
in
prüft nach de
TR .c
nie
TR .c t
t
Ka 6. Ka 6.
ge
3
3.
ge
t z
3.
t z Absa
Absa
6
Glass clamp
mm
25
mm
25
Item.nr. Matr.nr. For Item.nr. Dim. Application
DS01/M6 AISI 304 M6 EG/L 6 mm For serie E 00911
DS01/M6/S AISI 316 M6 EG/S 6 mm For serie E 0091
DS01/M8 AISI 304 M8
DS01/M8/S AISI 316 M8
Cr Cr
Pa osin Pa osin
Glass clamp, te ox Glass clamp, te ox
nt nt
for: 8-10-10,76 for: 12-12,76
mm glass mm glass
Cr Cr
Glass clamp, Pa osin Glass clamp, Pa osin
te ox te ox
for: 8-10-10,76 nt for: 12-12,76 nt
mm glass mm glass
AV
in
prüft nach de
nie
TR .c
t
Ka 6.
ge
3
3.
t z
Absa
Ø 70 mm Max: 18 mm
Item.nr. Application Matr.nr. Item.nr. Application Matr.nr. Dim.
E40571 flat back AISI 316 M12 x 50 E00950/H for tube Ø 42,4 mm AISI 316 52 x 64 mm
E40573 for tube Ø 42,4 mm AISI 316 M12 x 50 E00950/V for tube Ø 42,4 mm AISI 316 52 x 64 mm
E40574 for tube Ø 48,3 mm AISI 316 M12 x 50
For various sizes contact our website for more details.
7
8
end caps
9
10
floor mounting
100 mm
Floor base Floor base
hole Ø 11 mm
22 mm
ALUminium
Floor base Floor base
for glue
E 016 E 014
11
12
side mounting
90 mm
68 mm
Rectangular side circular side
mounted base mounted base
180 mm
159 mm
8,2 mm Ø hole
13
10
handrail brackets
Ø70x6 mm
75x75 mm
Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim.
E031 for tube Ø 42,4 x 2,0 mm AISI 304 5 x 65 mm E030 for tube Ø 42,4 x 2,0 mm AISI 304 95 x 65 mm E0223 for tube Ø 42,4 mm AISI 304 Ø 42,4 x 30 mm
E031/S for tube Ø 42,4 x 2,0 mm AISI 316 E030/S for tube Ø 42,4 x 2,0 mm AISI 316
E031/483 for tube Ø 48,3 x 2,0 mm AISI 304 E030/483 for tube Ø 48,3 x 2,0 mm AISI 304
E031/48S for tube Ø 48,3 x 2,0 mm AISI 316 E030/48S for tube Ø 48,3 x 2,0 mm AISI 316
Ø55x8 mm
Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim.
E45910 for tube Ø 42,4 mm AISI 316 84 x 100 mm E4586 for tube Ø 42,4-48,3 mm AISI 316 95 x 65 mm E022 for tube Ø 42,4 mm AISI 304 95 x 95 mm
E022/N for tube Ø 42,4 mm AISI 316 95 x 95 mm
15
accessories
16
Handrail holders
Gods 4 mm
Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Item.nr. Application Matr.nr. Dim.
E01198 for tube Ø 42,4 - 48,3 mm AISI 316 65 x 27 mm E01198/90 for tube Ø 42 - 48,3 mm AISI 316 E4583 flat back AISI 316 76 x 65 mm
E01197 for tube Ø 42,4 - 48,3 mm AISI 304 65 x 27 mm E4583/424 for tube Ø 42,4 mm AISI 316 76 x 65 mm
150
mm
80 mm
Ø 14 mm
Item.nr. Application Matr.nr. . Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim.
E0225 for tube Ø 42,4 mm AISI 316 E4582/424 for Ø 42,4 x 2,0 mm AISI 316 hole Ø 42 mm E4584 flat back AISI 316 76 x 65 mm
E02251 flat back AISI 316 E4582/483 for Ø 48,3 x 2,0 mm AISI 316 hole Ø 42 mm E4584/424 for Ø 42,4 mm AISI 316 76 x 65 mm
17
Crossbar holder
18
Fittings
A A
90˚ Curved elbow 90˚ Mitred elbow
A
Item.nr. Application Matr.nr. Dim. Item.nr. Application Matr.nr. Dim.
E450 for tube Ø 42,4 x 2,0 mm AISI 316 A=65 mm E451 for tube Ø 42,4 x 2,0 mm AISI 316 A=65 mm
E450/26 for tube Ø 42,4 x 2,6 mm AISI 316 A=65 mm E451/26 for tube Ø 42,4 x 2,6 mm AISI 316 A=65 mm
E2002 for tube Ø 48,3 x 2,0 mm AISI 316 A=73 mm E2012 for tube Ø 48,3 x 2,0 mm AISI 316 A=67 mm
E2002/26 for tube Ø 48,3 x 2,6 mm AISI 316 A=73 mm E2012/26 for tube Ø 48,3 x 2,6 mm AISI 316 A=67 mm
A
B
E446 for tube Ø 42,4 x 2,0 mm AISI 316 A=97 mm B=22 mm E455 for tube Ø 42,4 x 2,0 mm AISI 316 A=54 mm B=25,5 mm
E446/26 for tube Ø 42,4 x 2,6 mm AISI 316 A=97 mm B=22 mm E455/26 for tube Ø 42,4 x 2,6 mm AISI 316 A=54 mm B=25,5 mm
E4462 for tube Ø 48,3 x 2,0 mm AISI 316 A=109 mm B=25 mm E2062 for tube Ø 48,3 x 2,0 mm AISI 316 A=55 mm B=25,5 mm
E4462/26 for tube Ø 48,3 x 2,6 mm AISI 316 A=109 mm B=25 mm E2062/26 for tube Ø 48,3 x 2,6 mm AISI 316 A=55 mm B=25,5 mm
84 mm
E4471 for tube Ø 42,4 x 2,0 mm AISI 316 90 x 90 mm E456 for tube Ø 42,4 mm AISI 316 84 x 20 mm
E4471/26 for tube Ø 42,4 x 2,6 mm AISI 316 90 x 90 mm E2067 for tube Ø 48,3 mm AISI 316 94 x 23 mm
E4472 for tube Ø 48,3 x 2,0 mm AISI 316 103 x 103 mm
E4472/26 for tube Ø 48,3 x 2,6 mm AISI 316 103 x 103 mm
19
20
fittings
B
A
B
A
21
Woodline Fittings
E 603 E 604
Oak
Item.nr. Application Matr.nr. Dim.
E4260 for tube Ø 45 mm AISI 304 Ø 45 mm
E4265 for tube Ø 45 mm AISI 304 Ø 45 mm Ash
A B C
E 600/T
23
24
slotted tube
Rubber insert
Item.nr. Application
E1999100 Rubber insert to suit glass thickness 8,0 - 10,76 for NR 42,2 mm
E1999200 Rubber insert to suit glass thickness 12,0 - 16,76 for NR 42,2 mm
E1999300 Rubber insert to suit glass thickness 16,76 - 18,0 for NR 42,2 mm
E1999400 Rubber insert to suit glass thickness 8,0 - 13,0 for NR 48,3 mm
E1999500 Rubber insert to suit glass thickness 14,0 - 18,0 for NR 48,3 mm
E1999600 Rubber insert to suit glass thickness 18,0 - 20,76 for NR 48,3 mm
25
slotted tube
Horizontal 90°
Adaptor
Straight connector
End cap
26
inspiration
- look at WWW.CROSINOX.COM
27
CROSINOX A/S • Hesselager 19 · DK-2605 Brøndby · Tlf. +45 7020 2564 · Fax. +45 7020 2568 · www.crosinox.com
CROSINOX • www.crosinox.com