SIMCOM
Environmental Controls aed
Controls for the operation of the ECS are located below the
copilot's control column in a group labeled CABIN COMFORT.
‘A CABIN COMFORT CONTROL PANEL
Ihe MODE switch is used to select between automatic and
manual function of the ECS. In the "AUTO" position, desired
cabin temperature is selected with the COOL/WARM rhoostat
and is automatically maintained by a cabin temperature con
troller which receives signals Irom a cabin temperature sensor
located in the headliner. The controller transmits a signal to
the hot air bypass valve which regulates the amount of bleed
air permitted to bypass the air cycle process
If @ temperature increase is required, more bleed air is routed
through the hot air bypass vaive to the mixing muft. If a tem-
perature decrease is required, less bleed air is routed through
the hot air bypass valve to the mixing muff. This modulation of
ihe valve continuously adjusts the mixturo of hot and cool air to
maintain desired cabin temperature within the range of 60°F to
90°F
ot)
FOR TRAINING PURPOSES ONLY PABIT2 CHAPTER 9 3/95,