Professional Documents
Culture Documents
TO POWER
SUPPLY
TO COMM PORT
9) Select the COM port on the TD window that matches 14) The control box will exit programming mode and begin
the COM port used on your computer (COM 1, COM 2, to run the new code. If at this time the message EE
COM 3, or COM 4). alternating with ERR appears, you are advised to reset
the EEPROM memory to factory defaults.
10) Select the control box type (9164/9256).
Enter the technican’s menu to reset the EEPROM
memory:
• Power down the control box.
• While holding down the Set/Menu button, turn the
control box back on. The Auto LED light and the
Grade Adjustment direction arrows will flash. BEP
will appear on the display.