DAY THREE KILL SHEET EXERCISE
Complete a SURFACE IWCF Kill Sheet using the data below and answer the questions
on the following page:
WELL DATA:
Hole size By
Measured depth 11,997 ft
True vertical depth 11,937 ft
Casing (9 5/8” Csg — 47 lb/ft I.D.- 8.681 in) . = 9474 tt
Internal Capacities:
Drill pipe 5.0" 19.5 ibitt 0.0178 bbitt
HWDP —5.0"- 49.3 Ibift
Drill collars 61/4” od x 2.5" id
Volume from mud pumps to rig floor
0.0088 bbI/ft (iength - 497 tt)
0.0060 bit (length - 892 ft)
8.5 bbls
Annular Capacities:
Drill collars in open hole 0.0322 bbitt
Drill pipe/HWOP in open hole 0.0459 bblit
Dill pipe/HWOP in cased hole 0.0489 bit
Mud Pump Data:
Displacement at 97% efficiency = 0.117 bbl/stk
Slow Circulating Pump Data:
‘@ 30 SPM using Mud Pump No. 1 = 820psi
Other Information:
Active surface mud volume = 825 bbls,
Formation Strength Test Data:
Fracture mud weight at 95/8" casing shoe == 16.9 ppg
Kick Data:
Shut-in Drill Pipe Pressure 580 psi
Shut-in Casing Pressure 755 psi
Pit Gain = 12bbIs
Mud Weight at time of kick = 14.3 ppg
NOTE:
The well will be Killed at 30 SPM using the Wait and Weight Methodaa
3.b
ad
ae
3f
3.9
3.h
3j
3k
3
Caloulate the MASP using the mud weight of 14.3 ppg
- psi
What mud weight is required to balance formation pressure?
ppg
Calculate the Initial Circulating Pressure (ICP):
psi
Calculate the Final Circulating Pressure (FCP):
psi
Calculate the pump strokes to pump from surface to the bit:
strokes
Calculate the pump strokes to pump from the mud pump to the bit:
strokes.
Caloulate the time in minutes to pump from surface to the bit:
minutes
Calculate the time in minutes to pump from the mud pump to the bit:
minutes
Caloulate the strokes required to pump from the bit to the shoe:
___ strokes
How many minutes are required to circulate the total well system volume at 30
minutes
Calculate the MAASP with kill weight mud in the system:
psi
What is the pressure loss per 100 strokes as the kill mud is pumped from
surface to the bit?
psi/100 strokes,