Directors: R.Purcell : F.cara
Date: 17.01.19
Calibration Certificate No. 11066
5-MKL
319000399
24ov
2250 watts
Digital
The temperature
this oven was measured with a c
ested (un-laden) at 400c. Messuremen
to isc over this range.
mperat
Registered to BS EN 9001:2008
The Warrenty of Component Parts
on the date of Purchase. Faulty cox
Foc.
SignedDeclaration of Conformity/incorporation
The electrical equipment which accompanies this declaration is in conformity with EU
Directive(s)
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive
MITRE WELDING PRODUCTS LTD
Unit 2, Station Road
Furness Vale
High Peak, SK23 70A
United Kingdom
STATIONARY DRYING OVEN
Model SH5-lMIK1-240V. Serial No. 319000399
The Technical Construction File is maintained at: MITRE WELDING PRODUCTS LTD.
Only for Declaration of Incorporation
This electrical equipment covered by this Declaration must not be put into service until the
‘machinery into which it is to be incorporated has been declared in conformity with the
provisions of the applicable Directive(s). This statement Is only necessary where the
product is to be incorporated into a machine or system.
The following harmonized standards have been used.
Lvp EME
emission and immunity
EN 61000-6-2:2005 - EN 61000-6-
EN 60204-1:2006 - EN 60204-1:2006/A1:2009 2:2005/AC:2005
EN 60529:1991 - EN 60529:1991/A1:2000 EN 61000-6-3:2007 - EN 61000-6-
EN 60529:1991/AC:1993 3:2007/A1:2011
EN 50525-1:2011 - EN 50525-2-11:2011 EN 61000-6-4:2007 - EN 61000-6-
EN 50525-2-12:2011 - EN 50525-2-21:2011 4:2007/A1:2011
EN 50525-2-71:2011
The electrical equipment is CE-marked 2017.
Furness Vale, 17/01/2019
Authorized signatory
Dan Bates ~ Technical Manager - Mitre Welding Products LtdDirectors: R.Purcell : ¥.cara
Date: 17/11/2017
Calibration Certificate No. 10868
type ons—ach
Serial No. 461701255
Supply Voltage. 240v
2250 Watts
tat Type. Digital
wee measured with
_ jun-leden) at 400
Registered to BS EN 9001:2008
e Warzanty of Component incorporated in th
from the date of Purchase. Faulty components within th
replaced £0)
, | yf
were
————
comark BVG
Measurenents of tempe:
12 months
8 period will beDeclaration of Conformity/Incorporation
The electrical equipment which accompanies this declaration is in conformity with EU
Directive(s)
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive
MITRE WELDING PRODUCTS LTD
Unit 2, Station Road
Furness Vale
High Peak, SK23 70A
United Kingdom
STATIONARY DRYING OVEN
Model SH5-MK1-240V. Serial No. 461701255
The Technical Construction File is maintained at: MITRE WELDING PRODUCTS LTD.
Only for Declaration of incorporation
This electrical equipment covered by this Declaration must not be put into service until the
machinery into which it is to be incorporated has been declared in conformity with the
provisions of the applicable Directive(s). This statement is only necessary where the
product is to be incorporated into a machine or system.
The following harmonized standards have been used.
tv een Ps
emission and immunity
EN 61000-6-2:2005 - EN 61000-6-
EN 60204-1:2006 - EN 60204-1:2006/A1:2009 2:2005/AC:2005
EN 60529:1991 - EN 60529:1991/A1:2000 EN 61000-6-3:2007 - EN 61000-6-
EN 60529:1991/AC:1993 3:2007/A1:2011
EN 50525-1:2011 - EN 50525-2-11:2011 EN 61000-6-4:2007 - EN 61000-6-
EN 50525-2-12:2011 - EN 50525-2-21:2011. 4:2007/A1:2011
EN 50525-2-71:2011
The electrical equipment is CE-marked 2017.
Furness Vale, 17/11/2017
Authorized signatory
Dan Bates ~ Technical Manager - Mitre Welding Products Ltd