Professional Documents
Culture Documents
in performance due to
40
manufacture, pumped fluids
88.0 20 100 30
and system conditions.
20
10
1000 (cSt)
66.0 15
BAR
HP KW POWER at 1 cSt
7
44.0 10
5
5.4 4
22.0 5
2.7 2
1
0.5
SPEED rpm 100 200 300 400 500 600 700 800 900 1000 SPEED rpm 100 200 300 400 500 600 700 800 900 1000
2190 1079 701 507 386 302 238 188 147 110 X 100 MAX SPEED
47.6 mm
= 1000 rpm Issued by Philip Stokes
PORT BORE MAX VISCOSITY (cSt) (at 0 BAR)
SRU-038-H-7-70-REV-1 nov/00
PRESSURE
0.5 ( 7.25 PSI) ROTORS - ST.STL
TYPICAL PERFORMANCE CURVE 1 ( 14.5 PSI)
2 ( 29 PSI) BAR
TRILOBE
SRU3/027/ (SRU3NLS) WITH HYCLEAN SEAL 4 ( 58 PSI)
6 ( 87 PSI) 10 BAR ( 145 PSI)
8 ( 116 PSI)
USG/M M3/H FLOW 10 ( 145 PSI)
70 °C ( 158 °F)
1
Curves are representative. Pv Total Power =
Specific pumps may vary (Pv x rpm)/10000 + KW(1cSt)
61.6 14 in performance due to 10
HP KW POWER at 1 cSt
35.2 8 BAR
10
26.4 6 8
5.4 4
6
17.6 4
4
2.7 2
2
8.8 2
1
0.5
SPEED rpm 100 200 300 400 500 600 700 800 900 1000 SPEED rpm 100 200 300 400 500 600 700 800 900 1000
Application
The SRU range of rotary lobe pumps has been designed for
use on wide ranging applications within the Brewing, Dairy,
Food, Pharmaceutical and Chemical industries. The SRU
pump can handle from low to high viscosity media and is
suitable for CIP (Cleaning In Place) and conforms to USA 3A
Sanitary Standard.
The characteristic smooth, low shear pumping action is ideal
for products such as creams, gels, emulsions, aerated
mixtures, and delicate cells and organic solids in suspension.
Standard Design
Pump Gearbox
The SRU pump with its conventional lobe pump design
concept has a robust cast iron gearbox, which provides
maximum shaft rigidity and easy oil seal replacement. The SRU
range in series 1-4 has a universal gearbox design. This gives
the flexibility of mounting pumps with the inlet and outlet ports
in either a vertical or horizontal plane by changing the foot
position. The SRU range in series 5 & 6 has dedicated
gearbox castings, which also allows the inlet and outlet ports
to be in either the vertical or horizontal plane.
A quality epoxy paint system is used on the gearbox exterior
for optimum protection against natural and corrosive elements.
Pumphead Construction
The SRU in standard specification has sanitary design full bore
inlet and outlet ports to International Standards, maximising inlet
and outlet port efficiency and NPSH characteristics. Enlarged
diameter and rectangular ports are also available to handle very
high viscosity products. SRU Rotary Lobe Pump
Fig. 1
1 2 3 4
1 2 3 4
Flows/Pressures/Connections
SRU Build Selection SRUModel Displacement Inlet and Outlet Differential Maximum
Series Connection Size Pressure Speed
Sanitary Enlarged
D - Duplex Stainless Steel
L - Horizontal Porting
H - Vertical Porting
S - Stainless Steel
Pump head Code
See Note 1
Gearbox
Shaft
SRU1/005/LD or HD
1 005
008
L or H
L or H
D
D SRU1/008/LD or HD
0.053
0.085
1.17
1.87
1.4
2.25
25
25
1
1
-
40
-
1.5
8
5
115
75
1000
1000
Note 1. These pressure ratings may vary for pumps with certain threaded connections.
Dimensions
Horizontally ported
Vertically ported
PD 66342 GB1 2001-07 The information contained herein is correct at the time of
issue, but may be subject to change without prior notice.