DIGITALLY CONTROLLED
ATTENUATORS / MODULATORS
GENERAL DESCRIPTION GENERAL SPECIFICATIONS
‘These models are digitally controlled attenuators or “Frequency Range 0-18.0 GHz
modulators. This design utilizes an 8 bit positive Attenuation Range . -0-60 dB
binary control function. These units exhibit low in- RF Power. 420 dBm
sertion loss and are non-reflective at all settings. +30 dBm Survival
Rise & Fall Time . 1.5 usee / 50 ns
Power Supply #12 Volts, 100 mA
Control Voltage -6 Volts
‘8Bit Binary
Gnd
Analog In
Not Used
Gnd
0.25 4B
0.5 4B
1.048
2.04B
4.048
8.008
16.04B
32.048
wv
v
Not Used
Jona - Inches
im] A w]e
l2.se |1.47| 0.07
l2.00/1.71] 0.79
12.00 /1.81| 0.44
12.00 [2.00] 0.25
BRERA O@VomsenalF
DIGITALLY CONTROLLED ATTENUATORS / MODULATORS.
Range Atten vs Freq (+ dB)
PNG” | aiaeats) | Wie) inscuing” [Mas Sening | Ouline | Modelo
1020 18 18 03 16 1 3752-608
2040 18 15 03 16 2 4752-608
2550 20 18 03 16 2 4-5752-608
4080 24 47 03 16 3 5752-608
5.0-10.0 26 AT 05 16 3 5-6752-60B
60-120 27 18 07 16 3 6752-608
80-180 27 20 07 18 4 6-9752-608
* Max inrertion loss to 16 GHz, Max loss from 16to 1 Gllzia3.7 dB.
Page 28