You are on page 1of 2
SPRING HINGES ek Approved for use on all types of fire doors Refer to NFPA80 Heavy Weight —| BALL BEARING Bearing assemblies pc Lateral noe is employ an anti-fric- oq,” feulee ae tion sleeve that cQl),; earings are in the provides positive sree outboard positions lateral support not FEcecr aad found in standard weight assemblies >| Heavy Weight Standard Weight + The vertical load of the door is supported by through-hardened chrome alloy, vertical thrust ball bearing assemblies. + The lateral load of the door is supported by the pin bearing on the inside of the hinge knuckles. + Large cold headed, drawn stock of the pins and long bearing area within the knuckles distributes lateral wear over a greater area, resulting in increased life of the hinge. + Approved for use on all types of fire doors up to 4’x 10'(1219mm x 3048mm), 8'x 10' (2438mm x 3048mm) pairs, to maintain the integrity of fire rated openings and walls. Refer to NFPA80. Heavy Weight Standard Weight HINGES «D> i GVEV.R19063 Swinging Fire Door Closers Swinging Fire Door Closers CHANGZHOU CROSS DOOR HARDWARE CO LTD 19053 19 TONGIIA GONGYEYUAN QINGLONG (CHANGZHOU, UANGSU 213017 CHINA Forself closing doors, without hold-apen feature, Grade 1 Model SH404-O1 spring hinge with 4 In. leaves. Forsef-dosing doors, Spring hinge type, without hald-open feature, Grade 1 Models SP454S34, SP454534(11), SP454534(95), SP454534-01, Spubasaa-on(ts) and SPa54534-01(55) wath 4-5 I. let heloht Questions? Prt ths nage Notice of Disclaimer eae Ton ‘Coowiaht © 2010 Underwriters Laboratories ne. ® “The appearance of @ company's name oF product inthis database doesnot in islf assure that products so identified have been manufactured under US Falon-Up Service. Only those products besring the UL Mark should be considered to be Listed and covered under U's Follow-Up Service ‘Always look for the Mark on the product. UL permits the reproduction ofthe mataral contained inthe Online Certification Directory subject to the following conltions: 1. The Guide Information, Designs and/or Listings (es) rust be presence in ther entirety and i @ non-misleading manner, withovt any manipulation ofthe ota (or drewings). 2. The statement Reprinted from the Online Certftetons Directory with permission from Underwriters Laboratories Inc." must Sppesr adjacent the exacted material Tn addon, the reprinted material must include @ copyright tice in the following format: “Copyriaht © 3540 Underwntere Laborstones Ine

You might also like