Professional Documents
Culture Documents
Ciena 8700 - Packetwave - Platform - DS PDF
Ciena 8700 - Packetwave - Platform - DS PDF
8700
Packetwave Platform
and switch large quantities of packet traffic while • Flexible port configurations up
to 300 x 1GbE, 300 x 10GbE,
guaranteeing stringent Service Level Agreements 80 x 40GbE, 20x 100G DWDM,
or 60 x 100GbE
(SLAs), revolutionizing the capital and operational
• Low power consumption to keep
economics of 10GbE and 100GbE services in metro operating expenses in check
non-blocking capacity of up to 2.7 Tb/s (4-slot) and 6.8 Tb/s (10-slot). • Integrated Service Activation
Testing capabilities
• Seamless integration with Ciena’s
WaveLogic Photonics platforms
equipment or lease space in collocation facilities. Financial
margins are under pressure from over-the-top applications and
8700 Access
5170 services that drive network expansion faster than revenues.
10G 100G
Three key factors are essential for designing today’s packet In addition to low power and footprint, the service aggregation
networks: density, power consumption, and scalability. For switch should scale to support subscriber interfaces. Ciena’s
density, it is important to integrate as much bandwidth as 8700 was purpose-built for new market trends, scaling to a
possible and use very high-speed links. Reducing power massive 6.8 Tb/s.
Efficient use of real estate assets is a growing concern for The platform paves the way for seamless MPLS, and future
network operators who either house their own network technologies such as segment routing.
2
supports a comprehensive set of hardware-assisted packet OAM
Expanding Demands Need Packet Networking capabilities, including per-service Ethernet fault (IEEE 802.1ag)
Perfomance I Download white paper and performance monitoring (ITU-T Y.1731 and TWAMP) and
embedded Service Activation Test (RFC2544 and Y.1564 KPI’s) to
help guarantee and manage strict, market-differentiating SLAs.
Game-changing WaveLogic Photonics integration
The two technologies that have most impacted the efficiency Simplified multilayer management and control
and economics of metro networking in the past decade are
Ciena’s Blue Planet Manage Control and Plan (MCP) system
Ethernet and photonics. Technology in both of these areas
offers a unique and comprehensive solution for the
continues to advance at a frenetic pace, with no signs of
administration of mission-critical networks that span across
abating. By combining these two important technologies into a
access, metro, and core domains. The system provides
common Ethernet switching and aggregation platform, network
unprecedented multi-layer visibility from the photonic layer to
operators can optimize their metro and regional networks,
the packet layers. With this innovative management approach,
yielding measurable benefits in simplicity, capacity, scalability,
Blue Planet MCP returns control of the metro packet network
power, and space efficiency, along with compelling economics.
and services directly to the network operator. By providing a
Ciena combines the advanced packet-networking capabilities
unified view to the network from the photonic to the packet layer,
of SAOS with the latest award-winning WaveLogic Photonics
network operations are simple, secure, and highly cost-effective.
and WaveLogic 3 Nano technologies in the 8700 Packetwave
platform, allowing network operators to build intelligent, Flexible service delivery configurations
packet-optimized photonic networks that are both simpler
The 8700 Packetwave platform supports a flexible
and highly cost-effective.
menu of service offerings, including MEF-compliant
E-Line/E-LAN/E-Tree/E-Access and L3 services, over a
Differentiation through service velocity carrier-class, connection-oriented infrastructure using both
Service velocity has become a critical competitive advantage MPLS-TE and MPLS-TP. Integrated Routing and Bridging (IRB)
for network operators the world over. In many cases, service functions support efficient L3 packet forwarding that facilitates
velocity is the determining factor in winning new service sales. specific scenarios common in LTE-A and future 5G scenarios
In most competitive markets, it is simply no longer viable to ask
customers to wait months for new services to be provisioned. Future-proof scalability
The 8700 implements Ciena’s unique ZTP capabilities, allowing
Making liberal use of Ethernet, IP, and MPLS technology,
network operators to rapidly deploy new packet-based services
the 8700 can scale to support any number of network
in a completely automated manner. With no human intervention
architectures in view of varying market requirements for
required, manual provisioning errors are eliminated. Most
5G mobile backhaul, Ethernet Business Service delivery,
importantly, ZTP improves service deployment and velocity
and datacenter interconnect applications, to name a few.
and offers significant competitive advantage.
For example, the use of Seamless MPLS using BGP-LU
creates a scalable network hierarchy extending across
Rich packet OAM capabilities
regional RSVP-TE domains that would otherwise become
As network operators and their customers migrate away from
complex and unwieldy. The solution works with today’s MPLS
legacy TDM-based ports, connections, and services to new
environments, and can evolve to support modern packet
packet-based networks, guaranteed service levels must be
technologies such as seamless MPLS and segment routing
maintained, and, in many cases, improved. Packet networks must
while leveraging SDN control and programmability.
support a broad array of packet Operation, Administration, and
Maintenance (OAM) capabilities to ensure network operators can
proactively and reactively maintain and report on the ongoing
Connect with Ciena Now
health of their metro Ethernet networks and services. The 8700
3
Technical Specifications Service Line Modules (SLM): MEF 10.2 Egress Bandwidth Shaping per EVC
- PSLM-680-8: 6x QSFP28, 2x QSFP+ ports per COS
Physical Specifications - PSLM-400-31: 30x SFP/SFP+, 1x QSFP28 ports Per-VLAN MAC Learning Control
- PSLM-200-20: 20x 1GbE/10GbE SFP/SFP+ Private Forwarding Groups
Description 4-Slot 10-Slot
ports VLAN tunneling (Q-in-Q) for Transparent LAN
W X D X H (mm) 483 X 600 X 483 X 600 X
- PSLM-200-2: 2x 40GbE/100GbE CFP ports Services (TLS)
267 445
- CSLM-200-2: 2x 100G OTU-4 wrapped
WXDXH 19 X 23.5 X 19 X 23.5 X
100GbE over WaveLogic 3 Nano DWDM ports MEF CE 2.0 Certified
(Inches) 10.5 17.5
- PSLM-200-11: 10x SFP/SFP+, 1x QSFP28 ports - E-Access: Access EPL, Access EVPL
Chassis Per Rack 7 4 Any module; any slot - E-LAN: EP-LAN, EVP-LAN
Weight (Max) 91Lb/42Kg 147Lb/66Kg Control Timing & Switch Module (CTX/CTX-HD): - E-LINE: EPL, EVPL
DC Input -40Vdc to -60Vdc - 1x 10/100/1000M RJ-45 Management DCN - E-Tree: EP-Tree, EVP-Tree
AC Input 180Vac to 265Vac port
Power 1201 2113 - 1x Console Port (RJ-45, EIA-561) Carrier Ethernet OAM
Consumption (Typical) (Typical) - CTX, 1 Tb/s
EVC Ping (IPv4)
(Watts@ 1960 3043 - CTX-HD, 2.27 Tb/s
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
25°C/ -48V DC) (Maximum) (Maximum) Switch Module (SM/SM-HD):
IEEE 802.1ag Connectivity Fault Management (CFM)
(no optics) - No external interfaces
IEEE 802.3ah EFM Link-fault OAM
- SM, 800 Gb/s
Operating 32°F to 104°F ITU-T Y.1564 Ethernet Service Activation Test
- SM-HD, 2.27 Tb/s
Temperature 0°C to 40°C Methodology
Input / Output Module (IOM):
The system has been ITU-T Y.1731 Performance Monitoring (S-LM, DM)
- 16x External alarm inputs; 4 x External alarm
tested and complies with RFC 2544 Benchmarking Methodology for
outputs
the NEBS short-term Network Interconnect Devices
- 2x RJ-45 sync input/output port
operating requirement RFC 5618 TWAMP Responder and Receiver
- 4x SMB sync input/output ports
of -5°C to 55°C (23°F TWAMP Sender
to 131°F). Short-term
is defined in NEBS as a Ethernet Synchronization
period of not more than 96 Hierarchical Quality of Service (HQoS) including Line Timing Interfaces:
consecutive hours and a to- Ingress Metering/Egress shaping - 1GbE/10GbE In and Out (PSLM-200-20)
tal of not more than 15 days IEEE 802.1ad Provider Bridging (Q-in-Q) VLAN full - 40GbE/100GbE In and Out (PSLM-200-2)
in one year. (This refers to S-VLAN range - OTU-4 wrapped 100GbE In and Out
a total of 360 hours in any IEEE 802.1D MAC Bridges (CSLM-200-2)
given year, but not more IEEE 802.1p Class of Service (CoS) prioritization External Timing Interfaces:
than 15 occurrences during IEEE 802.1Q VLANs - BITS In or Out (T1: 1.544Mb/s, E1: 2.048MHz
that one-year period.) IEEE 802.3 Ethernet and 2.048Mb/s)
Storage -40°F to 158°F IEEE 802.3ab 1000Base-T via copper SFP - GPS Frequency In or Out (1.544MHz,
Temperature (-40°C to 70°C) IEEE 802.3ad Link Aggregation Control Protocol 2.048MHz, and 10MHz)
Relative 5% To 90% (LACP) GR-1244
Humidity (Non-Condensing) IEEE 802.3ba-2010 40GbE & 100GbE ITU-T G.813
Right Front Lower Front IEEE 802.3z Gigabit Ethernet ITU-T G.823/G.824
Air Flow to Left Rear to Upper Jumbo Frames to 9,600 bytes ITU-T G.8262 Synchronous Ethernet
Rear Layer 2 Control Frame Tunneling ITU-T G.8262/G.8264 EEC option1 and option2
Link Aggregation (LAG): Active/Active; Active/ ITU-T G.781
Standby ITU-T G.8261
Multi Chassis-LAG (MC-LAG): Active/Standby Stratum 3E oscillator
4
Technical Specifications continued CSLM-200-2 Optical Performance Service Security
50GHz/100GHz grid support Broadcast Containment Egress Port Restriction
Networking Protocols FEC Net coding gain: 12.1dB Hardware-based DOS Attack Prevention Layer 2,
Alarm Indication Signaling (AIS) with Link Nominal full-fiber reach: 120km unamplified to 3, 4 Protocol Filtering
Down Indication (LDI) and Remote Defect 1,000km amplified User Access Rights
Indication (RDI) PMD Tolerance: 150ps mean; 450ps
Automatic Pseudowire Reversion instantaneous Agency Approvals
ITU-T G.8032 v1, v2, v3 Ethernet Ring Protection Rx Sensitivity: -26 dBm Australia C-Tick (Australia/New Zealand) CE mark
Switching Service and Photonic Line Interoperability (SPLI) (EU)
Layer 2 Control Frame Tunneling over MPLS Tunable from 1528.77nm to 1566.72nm - EMC Directive (2014/30/EU)
Virtual Circuits Tx Output Power, provisionable: -11dBm to - LVD Directive (2006/95/EC)
MPLS Label Switch Path (LSP) Tunnel Groups +7.5dBm - RoHS2 Directive (2011/65/EU)
MPLS Label Switch Path (LSP) Tunnel ETSI 300 019 Class 1.2, 2.2, 3.2
Redundancy Network Management GR-1089 Issue 6 – NEBS Level 3
MPLS Multi-Segment Pseudowires Alarm Management & Monitoring Configuration GR-63-CORE, Issue 4 – NEBS Level 3, Zone 4
MPLS Virtual Private Wire Service (VPWS) OSPF/ Comprehensive Management via OneControl Earthquake
IS-IS for Dynamic MPLS-TP Control Plane RFC Enhanced CLI NRTL (NA)
2205 RSVP Integrated Firewall VCCI (Japan)
RFC 3031 MPLS architecture IPv4 & IPv6 Management Support Local Console
RFC 3209 RSVP-TE: Extensions to RSVP for LSP Port Standards Compliance
RFC 3630 OSPF-TE Per-VLAN Statistics Port State Mirroring Emissions:
RFC 4447 Pseudowire Setup & Maintenance RADIUS Client and RADIUS Authentication CISPR 22 Class A CISPR 32 Class A EN 300 386
using Label Distribution Protocol (LDP) Remote Auto configuration via TFTP, SFTP EN 55022
RFC 4448 Encapsulation Methods for Transport Remote Link Loss Forwarding (RLLF) EN 55032
of Ethernet over MPLS Networks (PW over RFC 959 File Transfer Protocol (FTP) FCC Part 15 Class A GR-1089 Issue 6
MPLS) RFC 1035 DNS Client Industry Canada ICES-003 Class A VCCI Class A
RFC 4664 Framework of L2VPN (VPLS/VPWS) RFC 1213 SNMP MIB II Environmental:
RFC 4665 Service Requirement of L2 VPN RFC 1350 Trivial File Transfer Protocol (TFTP) RoHS2 Directive (2011/65/EU)
RFC 4762 VPLS (Virtual Private LAN Service) and RFC 1493 Bridge MIB Immunity (EMC):
Hierarchical VPLS (H-VPLS) RFC 1573 MIB II interfaces CISPR 24
RFC 5654 MPLS-Transport Profile(TP) RFC 1643 Ethernet-like Interface MIB EN 300 386
- LSP Static provisioning RFC 1757 RMON MIB - including persistent EN 55024
- LSP Dynamic Provisioning configuration GR-1089 Issue 6 Power:
- 1:1 Tunnel protection RFC 2021 RMON II and RMON Statistics ETSI EN 300 132-2
RFC 5884 LSP Bidirectional Forwarding RFC 2131 DHCP Client ETSI EN 300 132-3
Detection (BFD) via GAL/G-Ach channels RFC 3877 Alarm MIB Safety:
RFC 6215 MPLS Transport Profile User-to- RFC 4291 – IPv6 addressing (for Management ANSI/UL 60950-1 2nd edition 2007 CAN/CSA
Network and Network-to-Network Interfaces Plane) C22.2 No. 60950-1-07 EN 60950-1
RFC 6426 MPLS On-demand Connectivity RFC 4443 – ICMPv6 IEC 60825-1 2nd edition (2007)
Verification and Route Tracing RFC 4862 – Stateless address auto- IEC 60825-2 3rd edition (2004)
RFC 6428 LSP and PW Connectivity Verification configuration IEC 60950-1
and Trace Route RFC 5905 NTP Client
Static ARP and MAC Destination Address Secure File Transfer Protocol (SFTP) Secure Shell
Resolution (SSHv2)
VCCV (Virtual Circuit Continuity Check) Ping and SNMP v1/v2c/v3
Trace Route SNMP v3 Authentication and Message
Multicast Encryption
DHCPv4 Relay Agent with Option 82 G.8032/ Software upgrade via FTP, SFTP Syslog with
IGMP interworking Syslog Accounting
IGMP over MPLS-TP TACACS + AAA
IGMPv3 with SSM Telnet Server
Virtual Link Loss Indication (VLLI)
Zero Touch Provisioning
Ciena may make changes at any time to the products or specifications contained herein without notice. Ciena and the Ciena Logo are trademarks or registered trademarks of
Ciena Corporation in the U.S. and other countries. Third-party trademarks are the property of their respective owners and do not imply a partnership between Ciena and any other
company. Copyright © 2017 Ciena® Corporation. All rights reserved. DS265 09.2018